Bedienungsanleitung Sentry DH-074E - Depository Safe (Seite 2 von 9) (Englisch, Französisch, Spanisch)

651329

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Getting started

Installation of the batteries

(keep door open during setup):

1. Turn the keypad housing counter clockwise

and carefully pull away from the mounting

plate to expose battery compartment.

2. Install four new AAA Alkaline batteries

(factory installed batteries may be included

with some models).

Caution: Hold onto the

keypad housing to avoid pulling wires.

Note: Do not use rechargeable batteries or any

other type of non-alkaline battery. Do not mix

old and new batteries. Do not mix alkaline and

standard batteries.

3. Carefully position the keypad into the

inserts on the mounting plate and turn

clockwise. Ensure that there are no wires or

cables trapped between the keypad and the

mounting plate. Pinched cables result in a

short circuit.

4. Enter: * - Master or Manager Code (from

front of booklet) - #

The lock will indicate a valid code entry with

a single signal and the open light will stay

green for ﬁve (5) seconds.

5. Turn the handle clockwise before the green

light disappears.

Depository Safe

Thank you for purchasing this security safe from Sentry

Safe. This guide is designed to maximize the user and security features of this product.

The SentrySafe electronic lock is shipped with a

factory set master & manager code (see front of

booklet). You should set the lock to your own

unique master & manager code immediately.

Please keep your codes in a secure location.

You may also register your codes on our

website at www.sentrysafe.com.

A single signal (LED ﬂashes and beeps once)

response from the lock indicates valid entry.

A double signal (LED ﬂashes and beeps

twice) response from the lock indicates an

invalid entry.

• If three incorrect entries are entered in a

row, the keypad will shut down for a period

of ﬁve minutes. During this shut down period

you will not get a response from the keypad.

Changing the Master Code

(Code length: 1 to 10 digit code)

Always

perform this operation with the door open.

1. Enter: # - Existing Master Code - #

2. The set light will stay orange for ten (10)

seconds.

3. Enter: 1 - * - New Master Code - # - New

Master Code - #, before the orange light

disappears.

If a mistake is made during the change, wait

thirty (30) seconds and repeat steps 1 thru 3.

Test the new code several times before closing

the door: Enter: * - Code - #

• The lock will indicate a valid code change

with a single signal.

• The lock will indicate an invalid code change

with a double signal and the old code is still

valid.

Changing the Manager Code

(Code length: 1 to 10 digit code)

Always

perform this operation with the door open.

1. Enter: # - Master Code or Manager Code - #

2. The set light will stay orange for ten (10)

seconds.

3. Enter: 2 - * - New Manger Code - # - New

Manager Code - #, before the orange light

disappears.

If a mistake is made during the change, wait

thirty (30) seconds and repeat steps 1 thru 3.

Test the new code several times before closing

the door: Enter: * - Code - #

• The lock will indicate a valid code change

with a single signal.

• The lock will indicate an invalid code change

with a double signal and the old code is still

valid.

Activate user codes

(Code length: 1 to 10 digit code)

Always

perform this operation with the door open.

1. Enter: # - Master Code or Manager Code - #

2. The set light will stay orange for ten (10)

seconds.

3. Enter: User ID Number (3-7) - * - New User

Code - # - New User Code - #, before the

orange light disappears.

If a mistake is made during the activation, wait

thirty (30) seconds and repeat steps 1 thru 3.

• The lock will indicate a valid code entry with

a single signal.

• The lock will indicate an invalid code entry

with a double signal and the old code is still

valid.

Example: # - Master Code or Manger Code - #

- 5 - * - New User Code - # - New User Code -

#. This will activate User Five (5).

Changing the user code

Always perform this operation with the door

open

1. Enter: # - User Code - #

2. The set light will stay orange for ten (10)

seconds.

3. Enter: New User Code - # - New User Code -

#, before the orange light disappears.

If a mistake is made during the change, wait

thirty (30) seconds and repeat steps 1 thru 3.

Test the new code several times before closing

the door: Enter: * - Code - #

• The lock will indicate a valid code change

with a single signal.

• The lock will indicate an invalid code change

with a double signal and the old code is still

valid.

The Master and Manager can also change

the user codes by following the “Activate user

codes” section steps 1 thru 3.

Deleting user codes

Always perform this operation with the door

open.

1. Enter: # - Master Code or Manager Code - #

2. The set light will stay orange for ten (10) seconds.

3. Enter: User ID Number (3-7) - * - # - #

Programming your lock codes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sentry DH-074E - Depository Safe Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info