Bedienungsanleitung Sevic Blue Laser SBL0401MP4 (Seite 4 von 21) (Englisch)

489201

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Please read all of the instructions below before beginning your installation. We recommend that

you have your unit installed by a mobile video/navigation installer.

Features

y Double DIN size, all-in-one highly integrated entertainment system

y Built-in DVD Player, Car specification slot-in mechanism

y Built-in RDS FM/AM Tuner.

y SD card reader READ/PLAY function.

y Built-in Bluetooth hands-free dial/answer for connection to Bluetooth cell phone.

y High resolution 6.5”(16:9) TFT color monitor, contrast and brightness adjustment

y Built-in 50W X 5 output amplifier, 5.1 channel surround sound output.

y Dual zone function with easy operation method.

y Smart Touch-screen operation

y All functions can be operated by included Remote Controls

y Rear zone remote control operation

y Special smart Dial remote control operation.

y Built-in iPod Control.

y DVB-T ready

y NAVI ready

y Powerful Graphic User Interface and software update ability.

Tools and Supplies

You will need these tools and supplies to install the unit.

• Torx type, flat-head and Philips screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screwdriver, socket wrench set or other tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

WARNING!

1. Only connect the unit to a 12-volt negative ground system.

2. Never install this unit where operation and viewing could interfere with safe driving conditions.

3. To reduce the risk of a traffic accident (except when using for rear view video camera) never

use the video display function while driving the vehicle. This is a violation of law.

4. Never disassemble or adjust the unit without the assistance of a professional. For details,

please consult your local car stereo specialty shop.

5. To prevent injury from shock or fire, never expose this unit to moisture or water.

6. Never use irregular discs.

7. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.

8. Do not change the fuse on the power wire without professional guidance. Using an improper

fuse may cause damage to the unit and result in a fire.

9. The monitor employs an automatic motorized mechanism. To prevent damage to the core

mechanism, please do not push, pull or swivel the monitor manually.

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery

cable prior to installation.

NOTE: If the unit is to be installed in a car equipped with an on-board drive or navigation

computer, do not disconnect the battery cable. If the cable is disconnected, the computer

memory may be lost. Under these conditions, use extra caution during installation to avoid

causing a short circuit.

NOTE: It is especially important that you read the WARNINGS and NOTES in this manual.

Pre

aration

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sevic Blue Laser SBL0401MP4 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sevic Blue Laser SBL0401MP4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info