Bedienungsanleitung Shark AZ950UK (Seite 11 von 13) (Englisch)

743278

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

sharkclean.eu

ENGLISH

+44 (0)800 862 0453

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn

power off and unplug unit before servicing�

This vacuum nozzle is speciﬁcally designed to pull in all types of debris and therefore can give

the feeling of being self-propelled, especially on short carpets. If you’d like to feel less pull

forward in use, set ﬂoor setting on the handle to either Hard Floor (for slower brushroll speed) or

Thick Carpet/Area Rug (for less suction).

Vacuum is not picking up debris� No suction or light suction�

(Refer to Maintenance section for more information�)

• Check ﬁlters to see if they need cleaning. Follow instructions for rinsing and drying the ﬁlters

before reinserting in the vacuum.

• Dust cup may be full; empty dust cup.

• Check hose, hose connections, nozzle, and accessories for blockages; clear blockages if required.

• Remove any string, carpet ﬁbres, or hair that may be wrapped around the brushrolls.

Vacuum lifts area rugs�

• Turn off unit to disengage the brushrolls. Be sure to select Thick Carpet/Area Rug setting.

• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.

Brushroll and/or Soft Roller does not spin or the Brushroll Indicator Light turns red�

• Turn off vacuum, and move it away from any obstruction. If cleaning area rugs or thick

carpet, ensure the appropriate setting is selected. Turn on vacuum and tilt handle back

to activate brushroll.

• If Brushroll Indicator Light on ﬂoor nozzle remains red, turn off vacuum and unplug. Disconnect

nozzle and remove any blockages. Make sure brushroll garage lid is ﬁrmly locked into position

on both sides. Plug in vacuum, turn on power, and tilt handle back to activate brushroll. If

Brushroll Indicator Light isn’t green and headlights are ﬂashing, check again that both sides of

lid are locked in place.

• If Brushroll Indicator Light is still red, please contact Customer Service on 080 862 0453.

The Brushroll Indicator Light on the ﬂoor nozzle doesn’t light up (either green

or red) when you tilt the handle back�

• Turn off the unit. Move the handle back up into the upright lock position and unplug the

vacuum. Make sure the brushroll garage lid is ﬁrmly locked into position on both sides. Plug

in the vacuum and turn on power, then tilt handle back to activate brushroll. If the Brushroll

Indicator Light on the ﬂoor nozzle turns green, the issue has been ﬁxed.

• If Brushroll Indicator Light is still red, please contact Customer Service on 080 862 0453.

Vacuum turns off on its own or Brushroll Indicator Light ﬂashes red�

• This vacuum is equipped with a motor-protective thermostat. If your vacuum overheats, the

thermostat will automatically turn the suction motor off. Perform the following steps to reset

thethermostat:

1. Turn vacuum off and unplug it.

2. Empty dust cup and clean ﬁlters (see Maintenance section).

3. Check for blockages in hose, accessories, and inlet openings.

4. Allow unit to cool for a minimum of 45 minutes.

5. Plug in vacuum and turn it on.

• If hose is not fully connected to the pod, it can cause a poor electrical connection and the

hose can come loose, turning the vacuum off.

1. Turn vacuum off and unplug it.

2. Empty dust cup and clean ﬁlters.

3. Check for blockages in hose, accessories, and inlet openings.

4. Remove cord from cord hook so hose latch can be seen and engaged.

5. Ensure that hose, wand, and handle are all clicked securely into place at all connection points:

a. Where hose meets back of pod (may require additional force; pull on hose to ensure

latch is fully engaged)

b. Where wand plugs into ﬂoor nozzle

c. Where handle plugs into wand

6. Plug in vacuum and turn it on.

Note: If vacuum still does not run properly, contact Customer Service on 080 862 0453.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark AZ950UK Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info