Bedienungsanleitung Shark Euro Pro - EP79 (Seite 5 von 6) (Englisch)

668686

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

OPERATING INSTRUCTIONS cont.

PRECAUTIONARY MEASURES

4. Take the HEPA dust cup filter out of

the dust cup, do not let the dust fall

out.

5. Take out the dust cup and dispose of

the dust inside.

HEPA Dust

Cup Filter

Dust Cup

Cleaning & Changing the

HEPA Dust Cup Filter (cont.)

Important: If the suction opening in the unit, the hose or the extension tube are

BLOCKED

, switch off the vacuum cleaner and remove the blocking substance before

you start the unit again.

9. Reassemble the debris screen to the

HEPA filter cartridge and replace into

dust cup (container). Ensure that the

filter assembly is completely seated

inside the dust cup (container).

1. Do not operate the vacuum

cleaner to close to heaters,

radiators or cigarette butts.

4. When pulling out the power plug

from the wall outlet, pull the plug

not the power cord.

10.Attach the dust cup (container) to the

vacuum.

5. Do not pick up anything that is

burning or smoking such as

cigarettes, matches or hot ashes.

2. Before inserting the power plug

into the wall outlet, make sure that

your hands are dry.

Fig. A

Warning: Allow 24

hours for drying before

replacing in unit.

PLEASE NOTE: The white pleated

filter material in the HEPA Dust Cup

Filter will discolor over time -This is

NORMAL and will NOT affect the

performance of the filter. If the HEPA

Dust Cup Filter

is properly

"TapCleaned”

after each use

and suction

does not return

to 100%, then

we suggest that

the HEPA filter

be “TapCleaned”

vigorously until no

more dust can be removed, then

rinsed under the faucet and allowed to

dry for 24 hours before refitting into

the vacuum. (Fig. A) Wash once

a month or when suction appears

reduced.

Wash once

a month or

when

suction

appears

reduced.

6. Do not use without dust cup filter or

filters in place.

Note: This vacuum cleaner is equipped

with a plug and power cord that retract

automatically. If the cord or plug get

damaged, it must be replaced by a

qualified technician.

HEPA Filter Debris Screen

6. Separate the debris screen from the

HEPA filter cartridge by grasping the

debris screen with one hand and the

filter frame with the other and pull

apart.

3. Before you start vacuuming,

make sure to remove large or

sharp objects that might

damage the dust bag.

Warning: Hold the plug when

rewinding the cord. Do not allow the

cord to whip

when rewinding.

7. Vigorously

“TapClean” the HEPA

Dust Cup Filter on a

hard surface until no

more dust is observed

falling out from

between the pleats of

the filter.

CAUTION: The suction hole must be

open, free of any obstructions at all

times. Otherwise, the motor will overheat

and could become damaged.

8. “TapClean” the Debris

Screen or rinse under

a faucet until clean.

Remember that

the Debris Screen

must be completely

dry before reinstalling

in the vacuum.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark Euro Pro - EP79 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info