Bedienungsanleitung Sharp 32DI6EA (Seite 11 von 16) (Englisch)

787852

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

[Default Channel]

Allows you to choose default Digital TV channel, which will be displayed

after TV is powered on.

[HBBTV Settings]

Allows the user to switch HbbTV on/o . To use HbbTV, TV must be

connected to the internet and watched channel must support HbbTV

service.

[Subtitle]

Select your preferred subtitle language and type.

[Teletext]

Select language for teletext.

[OAD]

Allows you to set automatic software upgrade via OAD (On Air Download)

on/o .

[Auto Sleep]

Controls the amount of time the set will continue to operate without any

buttons being pressed on the set or remote control before going into

standby.

[System Information]

Allows you to view signal frequency, signal quality and signal strength of

current Digital TV channel.

[Version Info]

Information about TV software version.

Settings menu

Network & Internet

To get to the Settings menu, press the HOME button, then select [Settings].

Available options

[Wi-Fi]

Allows you to enable/disable built-in WiFi.

[See all]

Shows full list of available wireless networks.

[Add new network]

Allows you to add Wi-Fi network manually. This is needed in case you set

up on your router invisible/hidden wireless network.

[Scanning always available]

Some location apps need to periodically scan other Wi-Fi devices in the

area. This function allows to scan Wi-Fi devices even in case Wi-Fi is turned

o  .

[Wow]

Allows the set to turn on via network control wirelessly.

[Wol]

Allows the set to turn on via network control over LAN connection.

[Proxy Settings]

Con gure proxy server for web browser.

[IP settings]

Con gure wired network.

Channel

To get to the Settings menu, press the HOME button, then select [Settings].

Con gures the settings related to receiving broadcast programming.

Available options

[Channels] (Antenna mode)

[Channel Scan]

Allows you to retune the television for all digital and analogue channels.

[Update Scan]

Tunes all frequencies, on which there are currently not tuned any channels.

It is recommended when searching new channels which were added

recently, without retuning all channels.

[Analog Manual Scan]

Direct tuning of analogue stations.

[Single RF Scan]

Allows you to manually tune your digital signal by selecting the channel

number.

[Manual Service Update]

Channel positions, names and frequencies will be updated by the provider.

[LCN]

Logical Channel Number. When turned on, digital stations will be ordered

according to provider preferences.

[Channel Scan Type]

Settings for [Channel Scan]. You can select what type of channels should

be tuned: Only encrypted channels, only free channels, or all channels.

[Channel Store Type]

Settings for [Channel Scan]. You can select what type of channels should

be stored after tuning  nish: Only digital TV channels, only radio channels,

or all channels.

[Favorite Network Select]

In some countries/areas may be available more networks. Channels will be

ordered di erently according to selected network.

[Channel Skip]

Allows you to choose channels, which will be skipped when pressing CH+ /

CH- buttons on the remote.

[Channel Sort]

Allows you to swap position of two channels between each other.

[Channel Move]

Allows you to move selected channel to new position.

[Channel Edit]

Allows you to delete channels from the channel list.

[Analog Channel Fine-tune]

Allows you to  ne-tune analogue channels to adjust picture quality.

[Channels] (Cable mode)

[Channel Scan]

Allows you to retune the television for all digital and analogue channels.

[Single RF Scan]

Allows you to manually tune your digital signal by selecting the channel

number.

[LCN]

Logical Channel Number. When turned on, digital stations will be ordered

according to provider preferences.

[Channel Scan Type]

Settings for [Channel Scan]. You can select what type of channels should

be tuned: Only encrypted channels, only free channels, or all channels.

[Channel Store Type]

Settings for [Channel Scan]. You can select what type of channels should

be stored after tuning  nish: Only digital TV channels, only radio channels,

or all channels.

[Channel Skip]

Allows you to choose channels, which will be skipped when pressing CH+ /

CH- buttons on the remote.

[Channel Sort]

Allows you to swap position of two channels between each other.

[Channel Move]

Allows you to move selected channel to new position.

[Channel Edit]

Allows you to delete channels from the channel list.

[Analog Channel Fine-tune]

Allows you to  ne-tune analogue channels to adjust picture quality.

[Channels] (Satellite mode)

[Satellite Re-Scan]

Allows you to scan selected satellite.

[Satellite Add]

Allows you to add new Satellite into the list of satellites.

[Satellite Update]

Tunes all frequencies, on which there are currently not tuned any satellite

channels.

[Satellite Manual Tuning]

Allows you to scan selected satellite transponder.

[Channel Skip]

Allows you to choose channels, which will be skipped when pressing CH+ /

CH- buttons on the remote.

[Channel Sort]

Allows you to swap position of two channels between each other.

[Channel Move]

Allows you to move selected channel to new position.

[Channel Edit]

Allows you to delete channels from the channel list.

[Clear Channel List]

Allows you to delete all tuned channels.

[Channel Installation Mode]

Set the type of Digital TV signal you receive. This setting a ects content of

[Channels] menu.

[Auto Channel Update]

If this option is set to ON, channel positions, names and frequencies will be

Sharp 32DI6EA Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp 32DI6EA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info