Bedienungsanleitung Sharp aquos lc-46d65e (Seite 34 von 49) (Englisch)

142111

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

Presetting Remote Control Function

You can operate the connected AV products (AV

receiver, cable box, SAT tuner, DTV, VCR, DVD, LD)

using the presetting manufacturer function of your

remote control unit.

Other Viewing Options

Presetting manufacturer codes

After the LED for your device lights up, press

FUNCTION and DISPLAY at the same time to

enter the code registration mode. The LED will

blink.

Press FUNCTION until the LED for your device

lights up.

After registering the code, the LED will stop blinking

then turn off after one second. (If you perform an

incorrect operation, the LED will blink quickly then

turn off.)

Press 0–9 to enter the manufacturer code. (See

page 33.)

• Preset mode is ﬁ nished once the LED no longer lights

up.

Operating the Connected Equipment

To operate the connected equipment, press

FUNCTION to select the LED for your device. (VCR,

AUDIO, CBL/SAT (cable converter) or DVD.) The

LED lights up, and the remote control unit button will

function as follows.

• When you operate VCR or DVD, press INPUT to select the

terminal connected to your device.

• CABLE and SAT cannot be selected at the same time.

1 SOURCE POWER

• Turns the connected equipment power on and off.

• Rewinds the tape and allows picture search. (VCR)

• Hold down to go in reverse. (DVD)

3 REC

• Starts recording. (VCR)

• Pressing quickly once takes you to the start of the chapter

currently playing. Each time you press it, you move back

to the start of the previous chapter. (DVD)

5 0–9 (CBL/SAT), • (DOT) (SAT)

• Press a button (or buttons) that corresponds to the

channel that you wish to watch.

• Starts playback. (VCR, DVD)

• Rapidly advances the tape and allows picture search.

(VCR)

• Hold down to fast forward. (DVD)

• Sets pauses and still pictures. (VCR, DVD)

• Stops the tape transport. (VCR)

• Playback stops when pressed. With some DVD players,

pressing the button twice may open the disc tray. (DVD)

• Pressing quickly once takes you to the start of the next

chapter. Each time you press it, you move ahead to the

start of the next chapter. (DVD)

11 FLASHBACK

• Press to switch between the current channel and the

channel you were watching immediately before. Some

manufacturers do not preset FLASHBACK. (CBL)

• Press CH

or CH

to tune in to a higher or lower

channel. (CBL)

• Press to select the channel of the TV tuner on the VCR.

(VCR)

13 MENU

• When this button is pressed, the DVD menu will display.

, ENTER

•

: Press the button to select items on the SAT

GUIDE screen or SAT MENU screen. (SAT). Press the

button to select items on the DVD MENU screen. (DVD)

• ENTER: Press to activate the selected function. (SAT,

DVD)

LC-42_46_52D65U_E.indb 32LC-42_46_52D65U_E.indb 32 2008/08/04 11:03:582008/08/04 11:03:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp aquos lc-46d65e Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp aquos lc-46d65e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info