Bedienungsanleitung Sharp GX-BT7 (Seite 22 von 24) (Englisch)

526642

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

E-13

Troubleshooting chart (continued)

iPod, iPhone or iPad

Symptom Possible cause

 No sound is

produced.

 The iPod, iPhone or iPad is

not playing.

 The iPod, iPhone or iPad is

not properly plugged in to

the unit.

 The AC power lead of the

unit is not plugged in.

 iPod, iPhone or iPad

will not charge.

 The iPod, iPhone or iPad is

not making full contact with

the connector.

 The iPod or iPhone is not

supported. Refer to page

10 for compatible models.

 “This accessory is

not made to work

with iPhone” or

“This accessory is

not supported by

iPhone” appears on

iPhone screen.

 The iPhone battery is low.

Please charge the iPhone.

 iPhone is not properly

plugged in.

USB

Symptom Possible cause

 Device cannot be

detected.

 Playback does not

start.

 There is no MP3/WMA ﬁ le

inside the device.

 The device is not properly

plugged in.

 A MTP device is plugged

in.

 The device contains AAC

ﬁ le only.

 A copyright-protected

WMA or false MP3 ﬁ le is

being played back.

Condensation

Sudden temperature changes, storage or operation in an

extremely humid environment may cause condensation

inside the cabinet or on the transmitter on the remote

control. Condensation can cause the unit to malfunction.

If this happens, leave the power on until normal playback

is possible (about 1 hour). Wipe off any condensation on

the transmitter with a soft cloth before operating the unit.

Before transporting the unit

Caution:

Remove all devices plugged in to the unit. Then, set the

unit to the power stand-by mode. Transporting the unit

with other devices plugged in might damage the units.

Maintenance

Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a di-

luted soap solution, then with a dry cloth.

Caution:

 Do not use chemicals for cleaning (petrol, paint thinner,

etc.). It may damage the cabinet.

 Do not apply oil to the inside of the unit. It may cause

malfunctions.

If problem occurs

When this product is subjected to strong external

interference (mechanical shock, excessive static

electricity, abnormal supply voltage due to lightning, etc.)

or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power

on again.

2 If the unit is not restored in the previous operation,

unplug and plug in the unit again, and then turn the

power on.

Note:

If neither operation above restores the unit, clear all the

memory by resetting it.

Factory reset, clearing all memory

1 Press the AUDIO IN (remote control) or FUNCTION

button repeatedly (main unit) to select AUDIO IN

function.

2 Press / button.

3 Within 1 second, press and hold button until

PAIRING indicator lights up.

PAIRING

Caution:

This operation will restore the unit to factory default

condition.

GX-BT7_OM_EN.indd 13GX-BT7_OM_EN.indd 13 2013-08-02 11:24:482013-08-02 11:24:48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp GX-BT7 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp GX-BT7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info