66384
39
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
37
Problem
“Recording” is not displayed in the TV menu
“Connections” for example cannot be called in
the TV menu (grayed out)
The control of the video recorder and the timer
do not work or do not work properly.
General problems with connecting external
equipment via an EXT input
A decoder connection does not function or is
faulty
All menus appear in the wrong language
Troubleshooting
Possible solution
Log in the video or DVD recorder in the connec-
tion wizard and connect the device.
Wait until the timer recording has ended or
delete the timer.
a) Activate AV Link in the video recorder (see
operating instructions of the video recorder)
b) Connect the Euro AV cable.
a) Compare the connection diagram with the
actual installation in the connection wizard
and connect as shown if necessary.
b) Set the standard correctly
c) Set the AV signal correctly
If “Automatic” is set for AV standard or AV
signal, this can lead to faults with signals which
do not conform to standard. Then the standard
and the signal are set according to the speci ca-
tions in the operating instructions of the external
device.
a) Follow the instructions in the connection wiz-
ard again and select the appropriate decoder
programs.
b) Follow the instructions in the connection
wizard again and select the right audio source
(decoder, TV or autom.), see instructions of
the decoder.
Set your menu language:
Press the INFO button in TV mode (index). Se-
lect the rst listing and call with OK. Then select
the language and con rm with OK.
Possible cause
No video or DVD recorder logged in
A time recording is in progress
a) The AV Link function is not activated or not
possible in the video recorder
b) Euro AV cable not connected
a) The device is not logged in in the connection
wizard or connected differently to shown in
the connection diagram.
b) The AV standard is set incorrectly
c) The AV signal is set incorrectly
a) The signal is not decoded because the wrong
decoder programmes are selected in the con-
nection wizard.
b) The sound is missing in decoder mode be-
cause the wrong decoder sound is assigned
in the connection wizard.
Menu language has been set incorrectly
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp LC-37GD7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info