Bedienungsanleitung Sharp xl 60 (Seite 5 von 36) (Englisch)

160018

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

(Continued)

■ Cassette tape

● For playback, use normal or low-noise tape for

the best sound. (Metal or CrO

tape is not rec-

ommended.)

For recording, use only normal tape.

● Do not use C-120 tapes, tapes with large diam-

eter reels, or poor-quality tapes, as they may

cause malfunctions.

● Before loading a tape into the cassette compart-

ment, tighten the slack with a pen or pencil.

● Cassettes have removable tabs which prevent

accidental recording or erasing from taking place.

Removing the tab will protect the corresponding

side from being erased. Cover the tab holes with

adhesive tape to erase or record again.

Warning:

The voltage used must be the same as that speci-

fied on this unit. Using this product with a higher

voltage than that which is specified is dangerous

and may result in a fire or other type of accident

causing damage.

SHARP will not be held responsible for any dam-

age resulting from use of this unit with a voltage

other than that which is specified.

■ Volume control

The sound level at a given volume setting depends

on a combination of speaker efficiency, location and

various other factors.

It is advisable to avoid exposure to high volume

levels, which occur whilst turning the unit on with

the volume control setting up high, or whilst con-

tinually listening at high volumes.

Warning:

CD players use a laser pickup which can damage

the eyes if viewed directly. Do not look at the pickup,

and do not touch the pickup directly.

■ Care of compact discs

Compact discs are fairly resistant to damage, how-

ever mistracking can occur due to the accumula-

tion of dirt on the disc surface.

Follow the guidelines below for maximum enjoy-

ment from your CD collection and player.

● Do not write on either side of the disc, particu-

larly the non-label side. Signals are read from

the non-label side. Do not mark this surface.

● Keep your discs away from direct sunlight, heat,

and excessive moisture.

● Always hold the CDs by the edges. Fingerprints,

dirt, or water on the CDs can cause noise or

mistracking. If a CD is dirty or does not play prop-

erly, clean it with a soft, dry cloth, wiping straight

out from the centre, along the radius.

■ Condensation

Sudden temperature changes, storage or opera-

tion in an extremely humid environment may cause

condensation inside the cabinet (CD pickup, tape

heads, etc.) or on the transmitter LED on the re-

mote control.

Condensation can cause the unit to malfunction.

If this happens, leave the power on with no disc

(or cassette) in the unit until normal playback is

possible (about 1 hour). Wipe off any condensa-

tion on the remote control transmitter LED with a

soft cloth before operating the unit.

YES

Correct

Side A (1)

Tab for side B (2) Tab for side A (1)

60H/70H(SUK)01-07 00.1.5, 11:38 AM4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp xl 60 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info