160018
32
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
31
(Continued)
To head-
phones socket
Headphones
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance
is 32 ohms.
When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
RESETTING THE MICROCOMPUTER
1
3
2,3
AC INPUT
3
Reset the microcomputer under the following
conditions:
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
If the display is not correct.
If the operation is not correct.
1 Press the ON/STAND-BY button to enter the
stand-by mode.
2 Unplug the AC power lead from the AC INPUT
socket on this unit.
3 Whilst pressing down the MEMORY/SET but-
ton and the 0 button, plug the AC power lead
into the AC INPUT socket on this unit.
Caution:
The operation explained above will erase all data
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
Internal care
Do not touch the laser pickup lens. If fingerprints
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetis-
ers instructions carefully before use.
External care
Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or
other chemicals.
MAINTENANCE
*60H/70H(SUK)28-32 00.1.5, 11:41 AM31
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp xl 60 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info