Bedienungsanleitung Siemens EA645GE17 (Seite 6 von 8) (Englisch)

791002

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Cleaning and care

The information in this section provides help on how best to

care for your hob.

Suitable maintenance and cleaning products can be purchased

from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills from

burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for glass ceramic.

Follow the cleaning instructions on the packaging.

Never use:

■Undiluted washing-up liquid

■Detergent intended for dishwashers

■Scouring agents

■Harsh cleaning agents such as oven spray or stain remover

■Abrasive sponges

■High-pressure cleaners or steam jet cleaners

Ground-in dirt can be best removed with a glass scraper,

available from retailers. Please note the manufacturer's

instructions.

You can also obtain a suitable glass scraper from our after-

sales service or from the e-Shop.

Using special sponges to clean glass ceramic achieves great

cleaning results.

Hob surround

To prevent damage to the hob surround, observe the following

instructions:

■Use only hot soapy water.

■Wash new sponge cloths thoroughly before use.

■Do not use any sharp or abrasive agents.

■Do not use the glass scraper.

After-sales service

Our after-sales service is there for you if your appliance should

need to be repaired. We are committed fo find the best solution

also in order to avoid an unnecessary call-out.

E number and FD number:

Please quote the E number (product number) and the FD

number (production number) of your appliance when

contacting the after-sales service. The rating plate bearing

these numbers can be found on the appliance certificate.

Please note that a visit from an after-sales service engineer is

not free of charge, even during the warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You can

therefore be sure that the repair is carried out by trained service

technicians who carry original spare parts for your appliances.

Installation instructions

The following must be noted

Electrical connection: To be carried out only by a licensed

expert. Incorrect connection will invalidate the warranty.

Installation: To be carried out only by a professional. The fitter

is liable for any damage.

Hob and cooker: must be the same brand, and have the same

combination feature.

Contact protection: must be ensured by the installation.

Installation instructions: cooker installation instructions must

be observed.

Work surface: Level, horizontal, stable.

Preparing the units

After making the cut-outs, remove any shavings.

Fitting unit: Heat resistant to at least 90 °C.

Cut surfaces: Seal with heat-resistant material.

GB 0344 892 8999

Calls charged at local or mobile rate.

IE 01450 2655

0.03 € per minute at peak. Off peak 0.0088 € per

minute.

PLQ

PLQ

PLQ

PLQ

5











[ 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EA645GE17 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EA645GE17

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info