Bedienungsanleitung Siemens Gigaset 5015 (Seite 4 von 38) (Englisch, Französisch)

522451

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

gase

5015

en-

r-ru-

A30350

M208

A801

UP19

5015

2011

Adjusting the loudspeaker

While in handsfree mode, you can set the volume to one of

7 levels and save it (default setting: 7).

H...I Adjust the volume with the Loud/Quiet key.

Activating/deactivating open listening

The built-in loudspeaker means anyone in the room can lis-

ten-in on a call.

L During a call:

press the Loudspeaker key.

To deactivate open listening: press the key

again.

When the loudspeaker is activated and the handset is

lifted, open listening is activated. The handsfree micro-

phone is switched off.

When the loudspeaker is activated and the handset is

replaced, handsfree talking via the handsfree microphone

is activated.

Activating/deactivating handsfree mode

With this telephone you can also make calls without lifting

the handset. The optimum distance for speaking into the

microphone is around 50 cm.

◆ Activating via the handset during a call:

L + a Replace the handset while pressing the Loud-

speaker key.

◆ Activating before dialling a phone number

L Before you dial: press and hold the Loud-

speaker key until the dialling tone is audible.

Deactivating handsfree mode:

c Lift the handset during a call.

Activating/deactivating the mute melody

You can activate and deactivate the mute melody for the

mute (default setting: on).

c?19#

Lift handset, initiate function.

0/1 0: deactivate; 1: activate.

?a Press the Set key. Replace handset.

Baby call (direct call) number setting

If a phone number is set for the Baby Call function, it is

dialled automatically when the telephone is locked after

you lift the handset (or press the Loudspeaker key) and

press any key (except

?, M, L, H and I). The

telephone does not allow other phone numbers to be

dialled, but incoming calls can be received.

c?M8

Lift handset, initiate function.

o Enter the PIN (default setting: 0000).

Activating

o Enter direct call number (max. 32 digits; not

< for pause function!).

or ...

Deleting

; Press the Last number redial key.

?a Press the Set key. Replace handset.

Locking/unlocking the telephone

Only the Baby call number can be dialed when the tele-

phone is locked.

c?M Lift handset, then start the function.

1 or 2 0: unlock; 1: lock

o Enter the PIN (default setting: 0000).

?a Press the Set key. Replace handset.

If the telephone is locked, the display shows

zzzz

Temporarily deactivating the telephone lock (for one call)

cMo Lift the handset, press the lock key, enter the

PIN (default setting: 0000).

o Dial a call number.

The telephone lock is active again when the handset is

replaced.

Locking/unlocking repertory numbers so they cannot

be changed

c?M6

Lift handset, initiate function.

(If necessary, press

= in order to lock/unlock

the repertory key on the 2nd level.)

o Enter the PIN (default setting: 0000).

/ 1 0: Repertory keys not locked

1: Repertory keys locked.

?a Press the Set key. Replace the handset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset 5015 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset 5015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info