Bedienungsanleitung Siemens Gigaset 5030 (Seite 7 von 34) (Englisch)

504623

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

gase

5030

eng-

A30350

M207

A801

5819

5030

_en.

Operation on a PABX

Entering/deleting an external line prefix

If you are using your telephone on a PABX, you may have to

save one or more external line prefixes. A dialling pause is

set automatically with the external line prefix. You can save

up to three (3) external line prefixes.

F ¢ Phone Setup ¢ Exchange Code

If no external line prefix has been set in a stor-

age location, "

" flashes in the display.

If several external line prefixes have been

saved, they will be displayed side by side; the

current external line prefix for editing flashes.

If necessary, use

A...C to toggle between

the external line prefixes displayed to edit

them as follows:

To enter an external line prefix:

o Enter a one- to three-digit code.

Enter additional external line prefixes:

A/C o Press the Down/Up key, then enter the next

external line prefix.

Delete the external line prefix:

>...> You can delete the access code one character

at a time using the R-key.

B Press the OK key.

Delete all external line prefixes

cF1252

Lift handset, select function.

Ba Press the OK key. Replace the handset.

Changing the dialling mode

F ¢ Phone Setup ¢ Dial Mode

A...C In the menu, select Tone or Pulse.

B Press the OK key.

Changing dialling modes during a call

If your telephone is set to pulse dialling and you want to use

functions that require tone dialling (e.g. remote access to

an answering machine), you can change the dialling mode

during a call.

* With an open connection: press the star key.

o Enter digits for remote control/data transfer.

When using touch tone dialling and entering the digits,

press the R key. Then it is automatically switched to pulse

dialling.

The telephone is reset to the original dialling mode by

hanging up the handset.

Recall key (on a PABX)

During an external call, you can make a recall or divert the

call. To do this, press the Recall key

>. The subsequent

procedure depends on your PABX. By default, the Recall key

is preset to a flash time (interruption time) of 90 ms for use

of new features on public telephone systems. With a

connection to a PABX, it may be necessary to change the

flash time (e.g. 600 ms). To do this, please refer to the

operating instructions for your PABX.

Setting the flash time for the Recall key

F ¢ Phone Setup ¢ Recall

A...C In the menu, select the desired flash time:

90 ms (default setting), 120 ms, 270 ms,

375 ms or 600 ms.

B Press the OK key.

Network services for public telephone

systems

If you want to use services that are to be triggered with the

Recall key, make sure beforehand that the correct flash time

is set for the key.

Recall key (in public telephone systems)

In public telephone systems, this key is required to use

certain additional services.

The appropriate flash time for a specific country must be set

before the Recall key can be used (see page 7):

◆ Belgium, Netherlands, Switzerland:

120 ms (access code 1)

◆ France, Luxemburg, Portugal, Germany, Greece:

270 ms (access code 2)

◆ other European countries: 90 ms (access code 0).

Note:

Network services are functions that your network provider makes

available to you. You have to request these services from your net-

work provider. They may be available or not depending on your

country (e.g. „Immediate emergency call“ on page 9 or „Automatic

callback“ on page 10).

If you require assistance, please contact your network provider.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset 5030 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset 5030

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info