Bedienungsanleitung Siemens RDE - Landis Staefa (Seite 2 von 2) (Englisch)

555876

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

CE1B3035en / 11.06.2001 Subject to alteration Siemens Building Technologies / Landis & Staefa Division

Do you want to enter your own 7-day

switching pattern?

A switching pattern consisting of 24 vertical pairs of

segments can be entered for every weekday. Each pair

represents a period of one hour. This means that a

switching action can occur every 60 minutes.

Example:

Switching pattern with factory setting Mo - Fr

1261824

Automatic operating mode changeover takes place

according to such a switching pattern, provided the

operating mode selector ist set to position

Proceed as follows:

• Press once to reach the entry mode

The current switching pattern for day 1

(Monday) will be displayed. The segments

at far left start flashing and the time of day

00:00 is displayed

• Press

to set the point in time where you

want to assign the operating mode

• Assignment of the operating mode to a point

in time is made by pressing

and

• Press or

1...7

to save the setting and to

change to the next day

• When entry of the 7-day switching pattern is

finished, press

and the entry will be

saved

Caution:

30 seconds after the last entry is made, the

controller will leave the entry mode. In that case,

the last switching pattern changes made will not

be saved!

Do you want to adjust the time of day?

Setting the time of day:

•

Press once

The time display starts flashing

• Press

to set the required time

• Press or to save the setting and to

leave the entry mode

Doyouwishtoreturntothefactorysettings?

To reset, first press and hold the button , then

press the two buttons

and

simultaneously

for 3 seconds. This means that the switching

times and setpoints will be reset to their default

values.

Caution: All individual settings will be

lost!

Temperature setpoint in normal operation: 20 °C

Temperature setpoint in energy saving mode: 8 °C

Day/s Normal

operation

Energy saving

mode

Mo (1) – Fr (5) 6:00 – 8:00 h

17:00 – 22:00 h

22:00–6:00h

8:00 – 17:00 h

Default

values

Sa (6) – Su (7) 7:00 – 22:00 h 22:00 – 7:00 h

To reset, first press and hold the button , then press the two

buttons

simultaneously for 3 seconds. All individual settings

will be reset to their standard values.

Does the symbol appear on the display?

(Only with battery-powered versions)

When this symbol appears, you need to replace the

batteries within the next two weeks.

Do you want to change the batteries?

(Only with battery-powered versions)

• Get two new alkaline batteries type AAA, 1.5 V

• Remove the battery holder, then the batteries, insert

the new batteries and replace the battery holder

Caution: The setting data are maintained for

a maximum of three minutes only!

• Make certain the old batteries are disposed of

properly, in compliance with environmental

requirements

Energy saving tips without sacrificing comfort

• Never allow room temperatures to exceed 21 °C

• Move the operating mode selector to energy saving

mode, even if you are absent for short periods of

time only.

• Air out the rooms for short periods of time only, but

properly, with the windows wide open

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens RDE - Landis Staefa Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens RDE - Landis Staefa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info