Bedienungsanleitung Siemens REV15 (Seite 2 von 2) (Englisch)

490911

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

CE1B2225E / 27.01.1999 Subject to alteration Siemens Building Technologies / Landis & Staefa Division

Do you want to change the temperature level

or will you be absent for a short period of

time?

When pressing this button, you change from

the current temperature level to the other. The

display shows either

, when the change

was made from the economy temperature, or

, when it was made from the normal

temperature. This means you can select the

economy temperature during the time you are

absent.

These changes are valid only up to

the next switching point.

Do you want to enter your own temperatures

and heating periods?

The controller has two different switching patterns A and

B which can be assigned to the respective weekday

block 1-5 / weekend block 6-7 (= Auto A/B), or the 24-

hour settings A and B.

Proceed as follows:

Use the setting slider to select the required

switching position (e.g. A1) and press

to enter the required switching

time.

All other switching positions (A2…A6

and B1…B2) are set the same way.

Select «Normal temperature» and press

to set the required value.

Select «Economy temperature» and press

to set the required value.

Auto

Run

Move the setting slider back to this position

and close the cover.

Table for entering selected values

Enter the values set by you in the following table. The

numbers already contained in the table represent

factory settings.

Temp.

6.00 8.00 11.00 13.00 17.00 22.00

Switchin

times

A1 A2

A4 A5 A6 B1 B2

7.00 23.00 20° C 16° C

2225Z12E

Will you go on holiday?

You can enter the duration of your holiday period. In

that case, the controller

immediately

switches to

economy mode and back to the selected operating

mode when the holiday period has expired. During the

holiday period, the display shows

and the number of

days left.

Proceed as follows:

Move the setting slider to the holiday symbol

and press

to enter the duration of

the holiday period (99 days max.).

Auto

Run

Move the setting slider back to this position

and close the cover.

If you return from your

holidays earlier than expected, reset the

holiday period to

Do you need to change the time of day or the

weekday?

Move the setting slider to the time of day

position and press

to set the

required time of day.

Day

Move the setting slider to the weekday

position and press

to select the

new weekday (1 = Monday…7 = Sunday).

Auto

Run

Move the setting slider back to this position

and close the cover.

Do you wish to return to the factory settings?

°C

By pressing these three buttons

simultaneously, a complete reset is made,

which means that the switching times and

temperatures will be reset to their default

values.

Caution: All individual settings will

be lost!

At the same time, a display check is

made, which looks as follows:

1234567

0 6 12 18 24

2225Z13

Does the symbol appear in the display?

If this symbol appears, you need to replace the batteries

within the next three months.

Do you want to change the batteries?

•

Get two new alcaline batteries type AA, 1.5 V.

•

Remove the battery holder, then the batteries, insert

the new batteries and replace the battery holder.

Caution: The setting data are maintained for a

maximum of one minute only!

•

Make certain the old batteries are disposed of

properly, in compliance with environmental

requirements.

Energy saving tips without sacrificing comfort

•

Never allow room temperatures to exceed 21 °C.

•

Press

to change to economy temperature,

even if you are absent for short periods of time only.

•

Air out the rooms for short periods of time only, but

properly, with the windows wide open.

Auxiliary functions

Your room temperature controller provides a number of

auxiliary functions, but these should only be set by your

heating engineer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens REV15 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens REV15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info