Bedienungsanleitung Sigma 10mm f2.8 EX DC Fisheye (Seite 1 von 1) (Englisch)

616720

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Thank you very much for purchasing a Sigma Lens. In order to get the

maximum performance and enjoyment out of your Sigma lens, please

read this instruction booklet thoroughly before you start to use the lens.

DESCRIPTION OF THE PARTS (fig.1)

① Adapter Ring

② Focus Ring

③ Distance Scale

④ Focus Index Line

⑤ Focus Mode Switch

⑥ Filter Holder

⑦ Mount

⑧ Guide Plate

DC DIAGONAL FISHEYE LENS

The 10mm f/2.8 EX DC HSM Diagonal Fisheye lens is designed for use

with digital SLRs with APS-C size image sensors and produces a

rectilinear image which fills the frame. The Nikon, Sony and Pentax

versions produce a diagonal angle of view of 180 degrees, the Canon

version produces a diagonal angle of view of 167 degrees and the Sigma

version produces a diagonal angle of view of 154 degrees.

The specialized design gives these lenses the ideal properties for digital

cameras.

◆ An image sensor element larger than those corresponding to APS-C

cannot be used in digital cameras or 35mm SLR cameras. If such an

element is used vignetting will occur on the picture surface.

ATTACHING TO CAMERA BODY

When this lens is attached to the camera body it will automatically function

in the same way as your normal lens. Please refer to the instruction

booklet for your camera body.

◆ On the lens mount surface, there are a number of couplers and

electrical contacts. Please keep them clean to ensure proper

connection. To avoid damaging the lens, be especially sure to place

the lens with its front end down while changing the lens.

◆ When you take a picture, please remove the lens cap and the adapter

ring (fig.1-①) not just the lens cap, to avoid vignetting.

SETTING THE EXPOSURE MODE

The sigma lens functions automatically after mounting to your camera.

Please, refer to the camera instruction book.

FOCUSING

This lens features Sigma’s built-in Hyper Sonic Motor (HSM). The HSM

enables quick and quiet autofocusing.

《SIGMA AF and CANON AF》

For autofocus operation, set the focus mode switch on the lens to the “AF”

position (fig.2). If you wish to focus manually, set the focus mode switch on

the lens to the “M” position. You can adjust the focus by turning the focus

ring.

《NIKON AF , PENTAX AF and SONY》

For autofocus operation, set the camera to AF mode and set the focus

mode switch on the lens to the “AF” position (fig.2). If you wish to focus

manually, set the focus mode switch on the lens to the “M” position. You

can adjust the focus by turning the focus ring.

◆ Please refer to camera’s instruction manual for details on changing the

camera’s focusing mode.

◆ For Nikon, Pentax and Sony mounts, it is only possible to use AF with

camera bodies which support motors driven by ultrasonic waves such

as HSM. AF will not function if the camera body does not support this

type of motor.

◆ This lens also permits manual focusing even in the autofocus mode.

With the camera set to the One-Shot AF (AF-S) mode, it is possible to

manually override the autofocus while the shutter release button is

pressed halfway.

◆ When operating this lens in manual focus mode, it is recommended

that correct focus be confirmed visually in the viewfinder rather than

relying on the distance scale. This is due to possible focus shift resulting

from extreme changes in temperature which cause various components

in the lens to expand and contract. Special allowance is made for this at

the infinity setting.

◆ This lens has a short focal length and gives a wide depth of field and

wide focusing area in front of and behind the subject. For this reason,

the focusing position with AF may not match the position of the Distance

Scale on the camera body.

◆ If the subject is too small, it may not be possible for the camera’s AF

sensor to focus on it. Please ensure the subject is in the AF frame

before shooting.

PREVENTION OF FLARE AND GHOST

Because of the extremely wide angle of view of this lens, flare and

ghosting may occur much more easily than with other lenses. When you

take a picture with this lens, please pay special attention to flare and

ghosting which can occur when shooting near or directly into the sun or

other very bright lights.

FILTER

Filters cannot be mounted on the front of the lens. If you wish to use

filters, please use gelatin type. Please cut the gelatin filter, using the

guide plate accessory as a pattern, and insert the filter into the filter holder

at the rear of the lens. (fig.3)

BASIC CARE AND STORAGE

◆ Avoid any shocks or exposure to extreme high or low temperatures or

to humidity.

◆ For extended storage, choose a cool and dry place, preferably with

good ventilation. To avoid damage to the lens coating, keep away from

mothballs or naphthalene gas.

◆ Do not use thinner, benzine or other organic cleaning agents to remove

dirt or finger prints from the lens elements. Clean by using a soft,

moistened lens cloth or lens tissue.

◆ This lens is not waterproof. When you use the lens in the rain or near

water, keep it from getting wet. It is often impractical to repair the

internal mechanism, lens elements and electric components damaged

by water.

◆ Sudden temperature changes may cause condensation or fog to appear

on the surface of the lens. When entering a warm room from the cold

outdoors, it is advisable to keep the lens in the case until the

temperature of the lens approaches room temperature.

TECHNICAL SPECIFICATIONS

Lens construction 7 – 12

Angle of View

154°(for SIGMA)

167°(for CANON)

180°(for NIKON / SONY / PENTAX)

Minimum Aperture 22

Minimum Focusing Distance 13.5cm (0.44 ft)

Magnification 1:3.3

Dimensions Dia.×Length 75.8×83.1mm (2.98×3.27 in)

Weight 475g (16.8 oz)

Dimensions and weight include the SIGMA mount.

ENGLISH

Sigma 10mm f2.8 EX DC Fisheye Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info