566371
21
Zoom out
Zoom in
Vorherige Seite
1/45
Nächste Seite
18
1.Preparation:
First connect the DVD player to your TV screen
or beamer by using its Composite video or S-
Video inputs, see page 14 or 17.
Connect the Component video cable (not
included) to the corresponding input on your TV
screen or beamer. Normally, the cables and
receptacles are labelled with red, green, and blue
to enable easier connection.
Power your TV screen or beamer and the DVD
player on and select the corresponding S-Video
or Composite Video signal input on the screen or
beamer.
2.Opening the Setup Menu to
Change the Video Settings:
Press the SETUP button (button 7 on the fold-out
cover page) on the remote control to display the
Setup menu. Press the Direction buttons to select the
“Video” menu and press the arrow button Right to
open the menu. Scroll down to the menu option
Video Out and press ENTER (button 11 on the fold-
out cover page) to open the menu. Press the
Direction buttons to select the option Component
and press ENTER (11) to confirm.
4.Using a Progressive-Scan
Compatible TV Screen:
As you have chosen to use the Component video
output connector you can alternatively set the video
output to be in Progressive Scan mode in order to
obtain high-resolution full-screen pictures. Please
only use this setting when you are sure that your TV
set supports Progressive Scan – please read its
Users Manual.
As described above, open the Video entry from the
Setup menu and use the Direction buttons to scroll to
the Video Out option.
Press the Direction buttons to select the option P-
Scan and press ENTER (11) to confirm. A warning
message will appear. Follow the on-screen
instructions.
Background Information:
Progressive-Scan generates a picture similar to a
computer display. It will use the entire picture stored
on the DVD without composing it from two half
pictures. The result is a sharper and flicker-free
picture.
3. Disconnecting the Composite
Video or S-Video Cable
Next remove the Composite or S-Video cable and
select the video channel associated with the
Component input on your TV set so the
Component video signal is displayed.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

silvercrest-dp5400x

Suche zurücksetzen

  • Wie bringe ich ein bild auf den Ferseher. Wasmuß ich an der Fernbedienung einstellen Eingereicht am 18-11-2019 18:29

    Antworten Frage melden
  • mit welchem Format muss ich Fotos für Dia Show speichern Eingereicht am 14-9-2018 11:26

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest DP5400x wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest DP5400x

Silvercrest DP5400x Bedienungsanleitung - Deutsch - 44 seiten

Silvercrest DP5400x Bedienungsanleitung - Holländisch - 45 seiten

Silvercrest DP5400x Bedienungsanleitung - Französisch - 45 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info