752553
52
Zoom out
Zoom in
Vorherige Seite
1/238
Nächste Seite
SilverCrest SMW 800 E2
50 - English
9.1.3 Setting the time
Hold down the Timer/Clock button (10) for approx. 3 seconds. “Hr 12” is shown on the
display (1). You can now switch between the 12 hour clock “Hr 12” and the 24 hour clock “Hr 24
by turning the rotary knob (9). Confirm by pressing the Start/Quick Start button (9). The hour digits
flash.
Select the current hour by twisting the rotary knob (9) and confirm by pressing the Start/Quick Start
button (9). The minutes digits flash.
Select the current minute by twisting the rotary knob (9) and confirm by pressing the Start/Quick Start
button (9).
You have now finished setting the time. The current time is displayed, even when the display lighting is
switched off.
9.1.4 Setting the kitchen timer
The microwave has a kitchen timer which you can use independently of the microwave. The time can be set
between 10 seconds and 95 minutes.
Press the Timer/Clock button (10).
Turn the rotary button (9) to set the time you want.
Press the Start/Quick Start button (9) to start the kitchen timer.
The time set now counts down. When the time is up, the appliance beeps and the current time is shown in
the display (1).
You can cancel the time countdown on the kitchen timer at any point by pressing the Stop (8) button.
The kitchen timer is cancelled and the current time is shown in the display (1).
While the kitchen time is set and counting down, you can use the microwave functions as normal. The
microwave function currently in use is shown in the display (1). Press the Timer/Clock button (10) to
show the current status of the kitchen timer for approx. 3 seconds. If the cooking or grilling process is
complete and the door (5) is opened, the display (1) shows the remaining time counting down on the kitchen
timer.
9.1.5 Setting the child lock
The child lock function gives you the option of preventing the microwave from being started by children or
other personnel who are not familiar with its use.
Activating the child lock: Press the stop button (8) for about 3 seconds until a beep sounds. The
symbol appears in the display (1).
The child lock is now activated. All the buttons and the rotary knob do not work.
Deactivating the child lock: Press the stop button (8) again for about 3 seconds until a beep
sounds. The symbol disappears in the display (1).
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest IAN 321962 SMW 800 E2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info