752553
64
Zoom out
Zoom in
Vorherige Seite
1/238
Nächste Seite
SilverCrest SMW 800 E2
62 - English
If you do not think the food needs turning, do nothing and simply allow the programme to continue. After a
short time, “turn” disappears and the display (1) continues to count down the remaining time.
The display (1) shows a flashing “End” to indicate the end of the defrost process and beeps 5 times. If the
microwave door is not opened, the 5 beeps are repeated every 2 minutes.
End” flashes on the display (1) until the door is open.
9.7 Start time delay
This function allows you to programme the microwave so that a programme you select starts at the time you
want.
When using this function, please note the safety instructions concerning fire hazards in
chapter 2.
To delay the start time, it is crucial that the clock is set correctly.
The start time delay does not work for the “Defrost” programme, the “A-05” (heating)
programme and the “Microwave mode / Quick Start” function.
Set the microwave function you want (microwave mode, grill mode, combination mode or automatic
programme).
Microwave mode: Press the Microwave button (12), select the power level and adjust
the cooking time you want using the rotary knob (9)
Grill mode: Press the Grill button (6), adjust to the grilling time you want using the rotary
knob (9).
Combination mode: Press the Combination button (7). Select the mode “C-1” or
C-2” you want using the rotary knob (9).
Automatic programmes: Use the rotary knob (9) to select an automatic programme
(apart from A-05) and confirm this by pressing the Start/Quick Start button (9). Twist the
rotary knob to select the weight of the food.
Press the Timer/Clock button (10). The hour digits flash on the display (1).
Select the hour for the start time you want by twisting the rotary knob (9) and confirm by pressing the
Start/Quick Start button (9). The minutes digits flash on the display (1).
Select the minute for the start time you want by twisting the rotary knob (9) and confirm by pressing
the Start/Quick Start button (9).
The programmed start time now flashes on the display (1). At the same time, the relevant symbols to match
the microwave function selected (microwave mode, grill mode, combination mode or automatic
programmes) also flash.
At the set start time, the unit beeps twice and the selected programme is started automatically.
It is possible to cancel the programmed start time and the whole process programmed at any time. To do
this, press the Stop button (8). The current time is now shown on the display (1).
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest IAN 321962 SMW 800 E2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info