8. Pull the water tank
forwards and out.
9. Fill the water tank
The water level in the water tank
should always lie between the
“MIN” and “MAX” marks on the side.
Push the water tank
back into the
10.Insert the mains plug into a suitable
mains socket, one that complies with the
11.Press the “FUNCTION” key
In the display
, the available functions
12.Turn the control knob
“SUPERSTEAM” display ﬂashes.
13. Press the control knob
14. Wait until the 30 minutes shown on the
timer are up.
15. Unplug the mains plug and allow the
appliance to cool down.
16.Clean the appliance again. Observe
here the information in the section
entitled “9. Cleaning” on page 23.
When using the steaming function of
the oven, steam will constantly escape
through the steam vent
. Make sure that
this steam can escape freely.
5.1 Preparing the appliance
1. Insert the mains plug into a wall socket
that complies with the technical data (see
“12. Technical data” on page 25).
2. Pull the water tank
forwards and out
of the appliance
3. Fill the water tank
– The water level must be above the
“MIN” mark on the side of the tank.
– Do not overﬁll the water tank
not exceed the maximum ﬁlling level
(“MAX” on side). This corresponds to
1.2 l water, which is enough for
RP57458 Dampfgarer LB6 Seite 8 Montag, 27. August 1956 9:07 21