Bedienungsanleitung Silvercrest SKM 550 EDS A1 - IAN 75466 (Seite 48 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

575495

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

- 46 -

Working with the food

processor

Note: Ensure that on the swivel arm

neither

the kneading hooks

, the whisk

nor the

mixing beater

are attached.

Proceed as follows to prepare the appliance for

operation with the food processor

• Press the unlocking button

down and bring

the swivel arm

into operating position 4

(see chapter "Operating positions“) (Fig Ạ).

• Insert the mixing bowl

. The base of the mixing

bowl

must engage in the recesses

on the

appliance.

• Press the unlocking button

down and bring

the swivel arm

into operating position 1

(see chapter "Operating positions“).

• Remove the drive protection lid for the food

processor

(Fig. ả).

• Insert the food processor

into the drive opening

(The "dot" marking on the food processor

the "arrow" marking on the swivel arm

) and

then turn it clockwise as far as it will go (The "lock"

marking on the food processor

onto the

"arrow" marking on the swivel arm

• Insert the drive shaft

• Depending on the task to be performed, place

the cutting

, rasping

or rubbing

disc

onto the drive shaft

of the food processor

• Place the lid with stodger

onto the food pro

cessor

and latch it down.

• Set the rotary switch

to the desired level.

Note: Do not press too many ingredients in the

food processor

. Take note of the table in the

chapter „Recommended filling quantities“.

• Insert ingredients through the loading shaft with

the stodger

Risk of injury from rotating parts!

To avoid personal injury and damage to the appli

ance, NEVER insert or place your hands or foreign

objects into the loading shaft. Only insert ingre

dients by use of the stodger.

Only change accessories when the drive motor

is at standstill! After being switched off, the drive

motor

continues to run for a short time. The ap

pliance may only be used when the drive openings

not being utilised are covered with drive protection

lids. In cases of malfunction switch the appliance

off and remove the plug from the wall socket,

this will avoid anunintentional switchingon of the

appliance.

On task completion

• Switch the appliance off with the rotary switch

• Turn the food processor

anticlockwise and

remove it.

• Disassemble the food processor

and clean all

parts (see chapter „Cleaning and care“).

Working with the mixer

Risk of scalds!

Allow hot fluids to cool to a handwarm temperature

(ca. 30 40°C) before they are poured into the

mixer

Proceed as follows to prepare the appliance for opera

tion with the mixer

• Press the unlocking button

and bring the

swivel arm

into operating position 3 (see

chapter „Operating positions“).

• Remove the drive protection lid for the mixer

(Fig. ấ).

• Fit the mixer

("Arrow" marking on the base

to the "point" on the base unit) and turn it anti

clockwise as far as it will go (Fig. Ầ).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKM 550 EDS A1 - IAN 75466 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info