646906
64
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
- 62 -
Without foodstuffs or accessories (glass plate 3, star
roller 4 and grill stand t) ), switch the appliance on
in the mode Grill:
Press the button Grill once 6 .
With this you select the Grill operation.
In the display 1 appears the symbol and
the symbol blinks. This indicates readiness
to start.
Adjust the control dial q to a cooking time of
10 minutes.
Press the button Start/Quick start q to
start the grilling process.
Note:
On the first usage, the generation of light smoke and
a slight smell can occur, this is due to the production
residues. This is unharmful. Provide for sufficient
ventilation. For example, open a window.
After 10 minutes, the appliance switches itself
off automatically. Signal tones sound. Open the
door. Wait until it has cooled down completely.
Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.
Inserting accessories
Place the star rotator 4 centrally on the drive
shaft in the cooking area. Ensure that it slides
completely onto the axle and is firmly seated.
Place the glass plate 3 centrally on the star
rotator. The three rollers must be seated on the
leading edge on the glass plate 3.
Operation
Setting the Clock
When you take the microwave oven into use for the
first time, or there has been a power cut, the display 1
indicates "1 : 0 1 ".
1. Press the button Clock 9 . "Hr 12" appears
in the display 1.Press the button Clock 9
once again should you wish to switch to the 24
hour mode.
2. By turning the control dial q programme in the
current hour. The clock symbol in the di
splay 1 blinks.
3. Press the button Clock 9 .
The minute indicator appears.
4. By turning the control dial q, programme in the
current minute.
5. When the correct time is programmed in, press
the button Clock 9 .
The clock symbol in the display 1 glows
continuously and the colon indicates, by blinking,
that the clock is running.
To read off the current time when the microwave oven
is in operation, press the button Clock 9 ; the
time will then be indicated in the display 1 for
approx. 4 seconds.
Setting the kitchen timer
The microwave oven is provided with a kitchen timer
which you can use independently of the microwave
operation.
1. Press the button Kitchen timer w when the
appliance is in standby mode. In the display
appears 1 "00:10".
2. Now set the desired time using the control dial q.
You can select any time range from 10 seconds
to 95 minutes.
3. Press button Start/Quick Start q . The
appliance emits an acoustic signal. The count
down begins. After approx. 3 seconds the cur
rent time is shown once again.
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SMW 800 A1 - IAN 66481 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest SMW 800 A1 - IAN 66481

Silvercrest SMW 800 A1 - IAN 66481 Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch - 74 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info