657275
21
Zoom out
Zoom in
Vorherige Seite
1/91
Nächste Seite
18 
GB
IE
NI
SMW 800 C3
Defrosting
You can use this function to defrost meat, poultry
and fish. The defrosting time and the power level
are calculated and set automatically once you
have entered the weight.
1) Press the defrost button
. The icon
appears in the display .
2) Use the control dial to enter the weight
of the food to be defrosted. You can enter
a weight of between 100 g and 1800 g.
3) Press the Start/Quick start button
.
The appliance calculates the defrosting time
automatically. It appears in the display and
starts to count down.
After about 1/2 the time you will hear some beeps
and „turn“ appears on the display . Open the
door and turn the food. Close the door again and
press the Start/Quick Start button
to resume
the defrosting process.
NOTE
If you wish to dispense with turning, simply
ignore the beeps. The defrosting programme
will continue despite the beeps!
Preset start time (Preset)
With this programme, you can preset a specific start
time to cook or grill your food. If the programming
is carried out correctly, the appliance starts auto-
matically at the programmed time.
TIPS
The clock must be correctly set to be able to
select the function "Preset start time".
The "Preset start time" function does not work
in combination with the "Defrost" function,
automatic programme 5 or the quick start
function.
1) Set the desired microwave function (cook-
ing, grilling or automatic menu (except auto
programme 5)):
For microwave operation: Press the micro-
wave button 3
, select a power output
level and adjust the cooking time with the
control dial .
For grill operation: Press the Grill button -
to activate the grill function. Set the desired
grilling time with the control dial .
For the automatic menu: Use the control
dial to select the appropriate programme
for your food (excluding auto programme 5).
Confirm your selection by pressing the Start/
Quick Start button
. Turn the control
dial to set the desired weight/number
of servings.
2) Press the Timer/clock button
. “01:”
flashes on the display and the
icon will
appear in the display .
3) Turn the control dial to program the hours.
4) Press the Start/Quick Start button
,
now the minutes appear.
5) Turn the control dial to program the minutes.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SMW 800 C3 - IAN 279042 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info