Bedienungsanleitung Silvercrest SMWC 700 B3 - IAN 352748 (Seite 28 von 145) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

773648

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

28 GB/IE

Initial use

Remove all packaging materials as well as protective

ﬁlms and check that all parts are complete and un-

damaged. Never remove the light beige Mica cover

1 in the cooking chamber of the product. This is

not a packaging material - its purpose is to protect

the magnetron. If the product is incomplete or dam-

aged upon delivery, please contact the manufacturer.

Choosing an installation site

Choose a level surface which ensures suﬃcient

free space for the aeration and ventilation of the

product (see Fig. C).

Make sure that the mains plug is easily accessible

so that it can be easily reached and unplugged

in case of danger.

Install the product as far away from radios and

elevisions as possible. Operating the product

can

cause disruptions in radio or television reception.

Preparing the product

Open the door 9 by pulling on the door

handle 8.

Before ﬁrst use, clean the product‘s cooking

hamber with a cloth and some lukewarm wate

Make sure that no residue is left when removing

all protective and adhesive ﬁlms.

Place the turntable shaft 6 in the hole in the

base of the cooking chamber. Make sure to in-

sert the turntable shaft 6 into the hole as far

as it will go.

Place the turntable ring 5 into the well inside

the cooking chamber.

Do not operate

the product without a properly

inserted glass plate 4.

Place the glass plate 4 on the turntable ring 5

and the turntable shaft 6. In doing so, the three

glass points on the underside of the glass plate

4 must engage in the grooves on the turntable

shaft 6.

Close the door 9 by pushing it shut. Make sure

that the door locking mechanism 7 clicks into

place.

Plug the mains plug into a professionally in-

stalled mains socket. Make sure that the mains

voltage corresponds to that of the product

(see “Technical data“).

Conﬁguring default settings

Setting the time

When the product is operated for the ﬁrst time or if

the electricity supply is interrupted, the display 2

shows “0:00“ and the time (24-hour display) must

be set.

Press the timer / clock button 11 twice.

The hour display will start to ﬂash.

Turn the rotary control 13 to set the desired hour.

Then press the timer / clock button

ain.

Turn the rotary control 13 to set the desired

minutes.

hen press the timer / clock button

ain.

The time is now set.

Setting the child safety lock

You can activate a child safety lock by pressing

and holding the stop button 14 for approx.

3 seconds. A signal tone sounds and

appears in the display 2. The product‘s buttons

now have no function. After approx. 3 seconds,

the time is displayed again, provided that it has

been set.

You can deactivate the child safety lock by

pressing and holding the stop button 14

again for 3 seconds. A signal tone sounds and

all functions are available again.

Use

Never operate

the product when empty!

Open the door 9 by pulling on the door

handle 8.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SMWC 700 B3 - IAN 352748 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info