Bedienungsanleitung Silvercrest SOR 2600 A1 - IAN 74201 (Seite 24 von 26) (Deutsch, Englisch, Holländisch, Französisch)

679044

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

- 22 -

4. Lay a roller railer 9 over it, such that the screw

threads protrude through the holes. Check to

ensure that the recesses on the roller railers 9

face outwards. The screw ends projecting from

the appliance must reach into the recesses.

5. Screw one wing nut 0 onto each of the threaded

ends of the mounting bracket 8 until it is hand

tight.

6. Proceed in the same manner with the other side.

7. Turn the appliance over and place it on the rollers.

Commissioning

1. Unwind all of the power cable from the power

cable retainer 7.

Note:

Ensure that the thermostat 3 and the heat level

switch 2 are standing at MIN resp. 0.

2. Insert the power plug into a wall power socket.

3. Place the heat level switch 2 at “III” and the

thermostat 3 at MAX. The control lamp “Power”

1 glows.

Note:

With the heat level switch 2 you can regulate how

quickly the appliance warms up. If you wish to heat

it up particularly quickly, select heat level “III”, if a

slow warming up is preferred, select heat level “I”.

Using the thermostat 3 you can set it to the desired

temperature.

4. When the desired room temperature has been

reached, slowly turn the thermostat 3 back until

a quiet “click” is heard and the control lamp

“Power” 1 extinguishes. The momentary room

temperature will now be retained. It could be

that every now and then the control lamp

“Power” 1 switches itself on and then back off.

This means that the programmed room tempera-

ture had fallen below this level for a short period

and the appliance had warmed itself back up.

Note:

If you want to heat a room up particularly quickly,

activate additionally the warm air switch 4.

When the warm air switch 4 is positioned at ON,

the warm air control lamp 4 glows and warm air is

blown through the warm air outlet 5 into the room.

5. If you wish to switch the appliance off, first place

the warm air switch 4 at the position OFF. Next,

turn the heat level switch 2 to “0” and then the

thermostat 3 to MIN.

6. Remove the plug from the wall power socket.

Frost protection function

You can adjust the oil-filled radiator so that it auto-

matically switches on and heats up when the room

temperature reaches about 5°C:

1. Insert the plug into a mains power socket.

2. Position the heat level switch 2 at “I”, “II” or

“III”, and the thermostat 3 at MIN.

The oil radiator will now switch itself on if the tempe-

rature falls to about 5°C. As soon as the room tem-

perature rises to above about 5°C, t he oil radiator

switches itself off automatically.

Fan Heater

You can use the oil radiator as a heating fan:

1. Insert the plug into a mains power socket.

2. Place the heating fan switch 4 at ON.

The red heating fan indicator lamp 4 lights up

and warm air will now be blown through the he-

ating fan exit 5 into the room.

3. To switch the heating fan off, place the heating

fan switch 4 at OFF.

The red heating fan indicator lamp 4 extinguis-

hes.

IB_74200_1_SOR2600A1_LB2.qxd 19.03.2012 11:33 Uhr Seite 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SOR 2600 A1 - IAN 74201 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SOR 2600 A1 - IAN 74201

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info