Bedienungsanleitung Silvercrest SSMK 40 B2 IAN 75929 (Seite 34 von 37) (Deutsch, Englisch, Holländisch, Französisch)

739818

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

34 GB

After use, switch oﬀ the shiatsu cushion by

pressing the On /Oﬀ button

Back massage:

Select with button A+B

, A

or B

the

area you would like to have massaged:

A+B: your whole back

A: upper back

B: lower back.

The LED lamp signalises the massage area that

has been set.

Note: When you select the massage area, the

automatic switch-of will be activated and set at

15 minutes.

Press the timer button

, employing the appro-

priate frequency, to set the automatic switch-oﬀ

at 5, 10 or 15 minutes.

Note: by resetting the timer setting, the timer will

begin counting anew. At the beginning of the

massage, select the maximum duration of the

massage and do not change this during the

massage in order to prevent the shiatsu cushion

from overheating.

Note: Ensure that you are experiencing the

massage as pleasant and relaxing. If necessary,

vary the pressure and/ or your position. Stop the

massage at once if it is painful or unpleasant.

Heating function:

Press the heat button

, to activate the heating

function.

Press the heat button

once again to deacti-

vate the heating function.

Note: The heating function cannot be activated

unless a massage program has been previously

selected.

Seat vibration:

Press the seat vibration button

to activate

the seat vibration. The vibration starts at a low

intensity and the relevant LED for seat vibration

will light up.

Press the seat vibration button

, with the

appropriate frequency, to switch to low,

medium or high intensity or to deactivate the

seat vibration.

Note: The seat vibration can be activated

together with the back massage. However, the

vibration intensity will be slightly reduced in

this case.

Demonstration:

Press the Demo button

to have the functions

of the shiatsu cushion demonstrated to you.

Troubleshooting

Problem

Cause

Rectiﬁcation

Massage heads rotate slower and slower.

Too much pressure on massage heads.

Relieve pressure on massage heads.

Massage heads do not move.

shiatsu cushion is not connected to the mains

supply.

Insert the plug and switch on the cushion.

shiatsu cushion is not switched on.

Switch on the shiatsu cushion by pressing the

On /Oﬀ button

. Select the massage area.

The transportation lock has not been removed.

The massage mechanism is damaged.

Contact your specialist dealer or the service ad-

dress.

Cleaning and Care

DANGER TO

LIFE BY ELECTRIC SHOCK!

Always disconnect plug from the

mains socket before cleaning the shiatsu seat

cushion. Otherwise there is a risk of electric

shock.

DANGER OF ELECTRIC SHOCK!

Do not pull the cover

over the

cushion until it is completely dry.

Otherwise there is a risk of electric shock.

CAUTION! DANGER OF MATE-

RIAL DAMAGE! Do not use chem-

ical cleaners or scouring agents for

Bringing into service / operation / Troubleshooting / Cleaning and Care

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SSMK 40 B2 IAN 75929 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info