739951
35
Zoom out
Zoom in
Vorherige Seite
1/39
Nächste Seite
English SilverCrest USB 2.0 Video Grabber SVG 2.0 A2
34
Attach the source of video output (e.g. camcorder) to the Video Grabber. You now have the
choice of the following types of connection:
Video / S-Video Signal
To transfer images connect either the S-Video cable (3) (same connectors at both ends of the
cable) or the yellow connector of the AV cable (4) (yellow, red and white connectors at both
ends of the cable) with the respective sockets of the connection adapter and your desired
source.
Do not plug both the S-Video cable and the yellow plug of the RCA cable in at the same time.
Audio Signal
To transfer sound connect the red and white connectors of the AV cable (4) (yellow, red and
white connectors at both ends of the cable) with the respective sockets of the connection
adapter and your desired source.
Scart Adapter
If your source does not have a video or S-Video connection use either the S-Video cable (3)
(same connectors at both ends of the cable) or the yellow connector of the AV cable (4)
(yellow, red and white connectors at both ends of the cable) with the scart adapter and then
connect this to your source in order to transfer sound.
To transfer sound also connect the red and white connectors of the AV cable (4) (yellow, red
and white connectors at both ends of the cable) with the scart adapter and your desired
source.
Plug the Video Grabber's USB connector into a free USB 2.0 or USB 3.0 port, ensuring your PC is
switched on. Use the enclosed extension cable (6) if necessary to extend the reach of the cable. If
possible, ensure that the Video Grabber is directly connected to your PC (not via a USB Hub).
Only use the device with a USB 2.0 or USB 3.0 connection.
The operating system will automatically detect the Video Grabber. Follow the instructions on the
screen.
Use the enclosed software to record from your source. The software provides detailed usage
instructions in electronic format. Start the relevant program.
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SVG 2.0 A2 IAN 89654 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest SVG 2.0 A2 IAN 89654

Silvercrest SVG 2.0 A2 IAN 89654 Bedienungsanleitung - Französisch - 39 seiten

Silvercrest SVG 2.0 A2 IAN 89654 Bedienungsanleitung - Italienisch, Portugiesisch, Spanisch - 51 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info