Bedienungsanleitung Silvercrest SWS 150 A1 - IAN 73768 (Seite 3 von 6) (Deutsch, Englisch, Französisch)

565786

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Introduction

Thank you for purchasing the SilverCrest SWS 150 A1 USB WLAN stick.

This USB WLAN stick is a cost-effective way to extend your PC or

notebook. The stick allows you to connect your PC or notebook to your

wireless network. Access your data easily without cables and surf the

Internet if there is Internet access available.

Intended use

This is an information technology device. It enables connection to

wireless networks. It may only be used for private and not industrial or

commercial purposes. Furthermore, the device may not be used in

tropical climates. Only connection cables and external devices that are

designed for this product in terms of safety, electromagnetic compatibility

and shielding quality may be used in conjunction with the device. This

device meets all relevant norms and standards in conjunction with CE

conformity. In the event of any modification to the device that was not

approved by the manufacturer, compliance with these standards is no

longer guaranteed. The manufacturer does not accept any liability for

any resulting damage or faults in such cases. If you are not using the

device within the Federal Republic of Germany, you must observe the

regulations and laws in the country of use.

Supplied items

 SilverCrest SWS 150 A1 USB WLAN stick

 CD-ROM with software

 User manual

Technical data

WLAN standards*

IEEE 802.11n (150Mbit/s),

IEEE 802.11g (54 Mbit/s),

IEEE 802.11b (11 Mbit/s)

Connection USB 2.0/1.1*

Input voltage 5 V

Power consumption 200 mA

Security/

encryption

64/128-bit WEP encryption

WPA/WPA2 and

WPA-PSK/WPA2 PSK encryption

Wi-Fi Protected Setup (WPS)

Frequency range 2,4GHz

Frequency Band

Modulation Method

QPSK / BPSK / 16-QAM / 64-QAM /

OFDM

Data transfer rate*

up to 150 Mbit/s (uplink/downlink)

LED indicator green LED

Antenna internal

Supported operating

systems:

Windows

7/ Vista / XP, MAC

System requirements

 Computer with at least a 1 GHz

compatible Pentium processor

 1 free USB 2.0 port

 CD-ROM or DVD drive for installing the

software

Dimensions 19.6 x 15.2 x 8.6 mm

Weight 2.2 g

The USB WLAN stick is backwards compatible with USB 1.1 ports.

However it is not possible to achieve the full transfer speed with this

connection.

The standard transfer rates – 150 Mbit/s, 54 Mbit/s and 11Mbit/s

– are the theoretically possible data rates. The actual data throughput

is less.

Safety instructions

This symbol indicates important information for safe operation of

the device and the safety of the user.

This symbol indicates other important information on the topic.

Before using this device for the first time please read the following

instructions carefully and take note of the safety warnings, even if you are

familiar with the use of electronic devices. Please keep this manual safe

for future reference. If you sell the device or pass it on, always include

this manual.

Ensure that

 no direct heat sources (e.g. heating) can affect the device;

 no direct sunlight or bright artificial light reaches the device;

 any contact with splashed and dripping water and corrosive liquids

is avoided and the device is not operated in the vicinity of water. In

particular the device should never be submerged in liquid (do not

place any items filled with liquid, e.g. vases or drinks near the

device);

 the device is not in the immediate vicinity of magnetic fields (e.g.

speakers);

 no fire sources (e.g. burning candles) are placed on or near the

device;

 no foreign objects penetrate the device;

 the device is not subjected to any extreme temperature fluctuations,

as this may result in moisture caused by condensation and therefore

a short circuit;

 the device is never subjected to excessive shocks and vibrations;

Children

Electrical devices do not belong in children's hands! Never allow children

to use electrical devices unsupervised. Children may not recognise

potential risks. Small parts can be fatal if swallowed. Always keep plastic

packaging away from children as it poses a suffocation risk. Batteries

can be fatal if swallowed. Keep batteries away from children. If a battery

is swallowed, seek medical help immediately.

Radio interface

Do not use the device on aircraft, in hospitals, operating rooms or in the

vicinity of medical electronic systems. The transmitted radio waves can

impair the functionality of sensitive devices. Keep the device at least

20cm away from any pacemakers, since the proper functioning of the

pacemaker can be impaired by radio waves. The transmitted radio

waves can cause interference in hearing aids. Do not place the device in

the vicinity of flammable gases or in an explosion-hazard environment

(e.g. paint shop) when the radio components are switched on since the

transmitted radio waves can cause an explosion or a fire. The range of

the radio waves is dependent on conditions in the surrounding

environment. In case of data traffic via a wireless connection, it is also

possible for unauthorised third parties to receive data. Targa GmbH is

not responsible for radio or television interference caused by

unauthorised changes to this device. In addition, Targa assumes no

responsibility for the replacement or exchange of connecting lines and

devices not indicated by Targa GmbH. Only the user himself is

responsible for the elimination of interference caused by such

unauthorised changes and for the replacement or exchange of the

devices.

Operating environment

The device is not designed for use in environments with a high

temperature or humidity (e.g. bathrooms) or in extremely dusty

conditions. Operating temperatures and operating air humidity: 5 °C to

40 °C, max. 85 % rel. air humidity.

Storage when not in use

If the device will not be used for a long period of time remove the USB

WLAN stick from the USB port of your computer. Ensure that the storage

temperature remains between -20 °C and 60 °C. The humidity should

not exceed 90% rel. air humidity.

Overview

1. WPS button

2. LED*³

*³ The LED flashes constantly as soon as

the USB WLAN stick is recognised by the

operating system. If data is being

transferred via WLAN, the LED will flash

faster.

Prior to use

Installing the software

Important: Connect the USB WLAN stick to your computer after the

software has been installed. If the USB WLAN stick is already

connected the software may not install completely or correctly.

The supplied software must be installed to be able to use the USB WLAN

stick. The following installation screen shots correspond to the Windows

7 operating system. With the Windows

XP / Windows Vista

/ MAC

operating systems the displays may be slightly different but the content

will be identical.

Insert the CD-ROM

supplied into the CD-ROM

drive of your computer and

start "setup.exe".

Select "USB 802.11N

Adapter".

To install the Windows

driver click on

"Windows" next to the

image with three USB

WLAN sticks.

Select the required

language and click on

"Next".

To start the installation click

on "Next".

After the driver has been

installed the computer has

to be restarted. Click on

"Finish" to restart the

computer.

Silvercrest SWS 150 A1 - IAN 73768 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info