467705
40
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
40
CHECK CHART FOR PERFORMANCE
PROBLEMS
GENERAL PROBLEMS
Machine does not sew.
* Foot control is not connected.
-
See page 8.
* Power switch is turned off.
-
Turn on the switch.
Machine jams/knocks.
* Thread is caught in hook.
-
Clean hook (see page 38).
* Needle is damaged.
-
Replace needle (see page 24 - 25).
Fabric does not move.
* Presser foot is not lowered
-
lower presser foot.
* Stitch length is set at 0.
-
Set it at 1 to 4.
STITCHING PROBLEMS
Machine skips stitches.
* Needle is not all the way up into needle clamp.
-
See page 24 - 25.
* Needle is bent or blunt.
-
Replace needle (see page 24 - 25).
* Machine is not threaded correctly.
-
See page 12.
* Thread is caught in hook.
-
Clean hook (see page 38).
Stitches are irregular.
* Needle size is not correct for thread and fabric.
-
See page 24 - 25.
* Machine is not threaded correctly.
-
See page 12.
* Top thread tension is too loose.
-
See page 23.
* Fabric is being pulled or pushed against machine feeding action.
-
Guide it gently.
* Bobbin has not been wound evenly.
-
Rewind bobbin.
Needle breaks.
* Fabric is being pulled or pushed against machine feeding action.
-
Guide it gently.
* Needle size is not correct for thread and fabric.
-
See page 24 - 25.
* Needle is not all the way up into the needle clamp (See page 24 - 25).
THREAD PROBLEMS
Thread bunches.
* Top and bobbin threads are not drawn back under presser foot
before starting seam.
-
Draw both threads back under presser foot
about 4 inches (10 cm) and hold until a few stitches are formed.
Needle thread breaks.
* Machine is not threaded correctly.
-
See page 12.
* Top thread tension is too tight.
-
See page 23.
* Needle is bent.
-
Replace needle (see page 24 - 25).
* Needle size is not correct for thread and fabric
-
See page 24 - 25.
Bobbin thread breaks.
* Bobbin case is not threaded correctly. See page 11.
* Lint accumulates in bobbin case or hook.
-
Remove lint
(see page 38).
Fabric puckers.
* Top and bobbin thread tensions are too tight.
-
Adjust thread tensions
(see page 23).
* Stitch length is too long for sheer or soft fabric.
-
Shorten stitch length.
COME RIMEDIARE A PICCOLI INCONVENIENTI
GUASTI COMUNI
La macchina non cuce
* Il cavo di collegamento non è inserito nelia spina.
-
Vedi pag. 8.
* Il selettore delia velocità è disinserito.
-
Metterio su 1 o 2.
Macchina bloccata
* I fili sono impigliati nel crochet.
-
Pulire o ii crochet (vedi pag. 38).
* L'ago è danneggiato.
-
Togliere I'ago. (vedi pag. 24 - 25).
La macchina non trasporta
* Il piedino è posizionato in alto.
-
Abbassare il piedino.
* La lunghezza del punto è regolata su 0.
-
Regolaria da 1 a 4.
* Il copri griffa è inserito.
-
Estrarre il copri-griffa.
PROBLEMI DI PUNTI
Punti saltati
* L'ago non è inserito correttamente
-
(vedi pag. 24 - 25).
* L'ago è piegato oppure è spuntato.
-
Cambiare I'ago (vedi pag. 24 - 25).
* La macchina non è infilata bene.
-
Vedi pag. 12.
* Fill impigliati nel crochet.
-
Pulire il crochet. (vedi pag. 38).
Punto irregolare
* L'ago non è adatto alla stoff a e al filo. (vedi pag. 24 - 25).
* La macchina non è infilata correttamente.
-
Vedi pag. 12.
* La tensione del filo superiore è allentata. Vedi pag. 23,
* Avete tirato sulla stoffa oppure I'avete spinta contro la direzione di
trasporto
-
Guidare la stoffa delicatamente.
* Il filo inferiore non è avvolto regolarmente.
-
Avvolgerlo di nuovo.
L'ago si rompe
* Avete tirato la stoffa oppure I'avete spinta contro la direzione del trasporto.
-
Guidare la stoffa delicatamente.
* La misura dell'ago non è adatta alla stoffa e al filo.
-
Vedi pag. 24 - 25.
* L'ago non è spinto a fondo nel porta-ago.
-
Vedi pag. 24 - 25.
PROBLEMI CON I FILI
I fili si aggrovigliano
* Il filo superiore e quello inferiore prima dell'inizio della cucitura non sono
tirati indietro sotto il piedino. Tirate tutti e due i fili circa 10 cm. sotto il
piedino e fissateli leggermente con qualche punto.
Il filo superiors si rompe
* La macchina non è infilata correttamente.
-
Vedi pag. 12.
* La tensione del filo superiore è eccessiva.
-
Vedi pag. 23.
* L'ago è piegato.
-
Cambiare I'ago. Vedi pag. 24 - 25.
* La misura dell'ago non è adatta alla stoffa e al filo.
-
(vedi pag. 24 - 25).
Il filo inferiore si rompe
* La bobina non è inserita correttamente.
-
Vedi pag. 11.
* Filaccia intasa la bobina o ii crochet. Togliere la filaccia.
-
(vedi pag. 38).
La stoffa si raggrinza
* La tensione del filo superiore ed inferiore è eccessiva. Allentare la tensione
del filo.
-
(vedi pag. 23).
* La lunghezza del punto per stoffa leggera e morbida è eccessiva.
Accorciare la lunghezza del punto.
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Singer 118 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info