527763
53
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
51
5.7.4 Route Table
The Route Table page displays routing table and allows the user to manually enter the
routing entry. The routing table will display the routing status of Destination, Netmask,
Gateway, and Interface. The interface br0 means the USB interface; lo0 means the
loopback interface; and ppp1 means the PPP interface. The Gateway is the learned
Gateway
New Enhancement for Routing Table
• The Gateway field of the static route entry allows users to either enter a Gateway IP
address or select a Network Interface.
• All user-defined routes retained in the CPE memory, regardless if they are already in the
Routing Table, are displayed on the same Route Table page.
• All user defined route entries kept in the CPE memory during run time are saved to flash
when the user chooses to save and reboot the CPE. When CPE restarts, it reloads all
saved user-defined routes to the CPE memory and tries to apply to the system.
• A user-defined route entry is added to the Routing Table whenever the system provides
an environment that makes the route entry applicable. It is removed from the Routing
Table whenever the route entry becomes not applicable. e.g. If the route entry’s Gateway
is associated with a dynamic Network Interface but the connection is not established, then
the route entry does not appear in the Routing Table. When that interface comes up later,
the route entry is then added.
• If the selected Network Interface is static or is dynamic and the connection is already up,
then the route entry appears in the Routing Table immediately. If there is a Gateway
associated with the selected Network Interface, then that Gateway’s IP address appears in
the Gateway field of the route entry
• If the selected Network Interface is dynamic but the connection is not established, then
the route entry does not appear in the Routing Table. When the interface comes up later,
the route entry is then added.
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sitecom DC-214 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sitecom DC-214

Sitecom DC-214 Installationsanweisung - Holländisch - 27 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info