462937
7
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Please check www.sitecom.com for up to date drivers & utilities, manuals and support
4. Basic Installation & Configuration
4.1 Connecting the Hardware
Make sure that your USB devices are switched off and that the Server’s Power Adapter is
disconnected.
Connect the USB devices to the USB port with the USB cables.
Connect the MFP Server to your modem or wireless router with an Ethernet cable.
Turn on the USB device and make sure it’s ready to use.
Connect the Power Adapter to the MFP Server. The power indicator will light up and the
indicator will flash. When the Link indicator lights up, the Server is correctly connected to the
network. When the USB indicator stops flashing, the Server is ready to use.
4.2 Assigning an IP Address to the Server
Note
Before starting to search the MFP server, please ensure all Firewall applications are turned off (or
unblock the Control center software in your Firewall settings.
4.2.1 Preliminary
If you have a DHCP server in your network, your MFP Server will receive an IP address
automatically. The IP address will then appear in the Control Center or on the configuration
report that you printed earlier. If your DHCP server does not give an IP address to the MFP
Server, the MFP Server will use the Factory IP address: 192.168.0.220.
If you are not working in a DHCP network, you need to manually set the Server’s IP address.
To do this, please connect the MFP server directly to your PC. Change the IP settings on your
computer to match the range of the MFP server Factory IP address (192.168.0.220). For
example, temporarily change the IP-address on your computer to ‘192.168.0.200’.
4.2.2 Manual Setting for Server’s IP address
Press Start -> Control Panel. Then select “Network and Internet Connections” and click
Network Connections”.
Double click the “Network Connection” icon. Under the “This connection uses the following
items”, select the “Internet Protocol (TCP/IP)”. And then clickProperties” button.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sitecom LN-309 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info