Zoom out
Zoom in
Vorherige Seite
1/73
Nächste Seite
WL-308
Gaming Router
Full Manual
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    WL-308
    Gaming Router

    Full Manual



  • Page 2

    WL-308 Gaming Router

    1

    Full Manual

    INTRODUCTION............................................................................................................................. 4
    FEATURES & BENEFITS ......................................................................................
    PACKAGE CONTENTS ........................................................................................
    SAFETY GUIDELINES ........................................................................................
    PRODUCT LAYOUT............................................................................................
    BACK LABEL ..................................................................................................
    SYSTEM REQUIREMENTS ....................................................................................

    2

    5
    6
    6
    7
    8
    9

    UNDERSTANDING THE HARDWARE ................................................................................ 10
    HARDWARE INSTALLATION .................................................................................10
    IP ADDRESS CONFIGURATION ............................................................................11

    3

    INTERNET CONNECTION WIZARD ................................................................................... 12

    4 WI-FI PROTECTED SETUP WIZARD ...................................................................................... 14
    ADD A WIRELESS DEVICE .................................................................................15
    USING THE PIN.............................................................................................16
    USING THE PUSH BUTTON .................................................................................16
    5 ADVANCED WEB CONFIGURATION ....................................................................................... 18
    LOGGING IN .................................................................................................18
    5.1 HOME 19
    Device ................................................................................................................................................. 19
    Wireless.............................................................................................................................................. 19
    Logs ..................................................................................................................................................... 21
    Stats .................................................................................................................................................... 22
    DHCP ................................................................................................................................................... 23
    5.2 BASIC24
    Network .............................................................................................................................................. 24
    Wireless.............................................................................................................................................. 26
    WAN ..................................................................................................................................................... 31
    Advanced Wireless......................................................................................................................... 40
    Advanced Network ......................................................................................................................... 41
    5.3 FIREWALL ...............................................................................................43
    Virtual Server................................................................................................................................... 43
    Special Application......................................................................................................................... 44
    Portort Forwarding......................................................................................................................... 45
    Access Control ................................................................................................................................. 46
    Website Filter ................................................................................................................................... 49
    Schedules .......................................................................................................................................... 50
    5.4 ADVANCED SETTINGS .................................................................................51
    Dynamic DNS ................................................................................................................................... 51
    StreamEngine .................................................................................................................................. 52
    Routing ............................................................................................................................................... 53
    MAC Address Filter......................................................................................................................... 54
    Firewall Settings ............................................................................................................................. 55
    WISH ................................................................................................................................................... 59
    Inbound Filter .................................................................................................................................. 61
    5.5 TOOLBOX ...............................................................................................62
    Time Configuration ........................................................................................................................ 62
    System Settings.............................................................................................................................. 63
    2



  • Page 3

    WL-308 Gaming Router

    Full Manual

    Firmware............................................................................................................................................ 66
    Syslog ................................................................................................................................................. 66
    Administrator Settings ................................................................................................................. 67
    APPENDIX A – SPECIFICATIONS ............................................................................................... 69
    HARDWARE SUMMARY ......................................................................................69
    RADIO SPECIFICATIONS ...................................................................................69
    ROUTER AND GATEWAY ....................................................................................70
    MANAGEMENT ...............................................................................................71
    ENVIRONMENT & PHYSICAL ...............................................................................72
    APPENDIX B FCC INTERFERENCE STATEMENT .................................................................. 73

    3



  • Page 4

    WL-308 Gaming Router

    Full Manual

    1 Introduction
    The WL-308 is a draft 802.11n compliant device that delivers up to 6x faster
    speeds than 802.11g while staying backward compatible with 802.11g and
    802.11b devices.
    It is not only a Wireless Access Point, which lets you connect to the network
    without wires. There's also a built-in 4-port full-duplex 10/100/1000 Gigabit
    Switch to connect your wired-Ethernet devices together. The Router function ties
    it all together and lets your whole network share a high-speed cable or DSL
    Internet connection.
    The Access Point built into the Router uses advanced MIMO (Multi-Input, MultiOutput) technology to transmit multiple steams of data in a single wireless
    channel. The robust signal travels farther, maintaining wireless connections up to
    3 times farther than standard 802.11g, eliminating dead spots and extending
    network range.
    To protect the data and privacy, the Router can encode all wireless transmissions
    with 64/128-bit encryption. It can serve as your network's DHCP Server, has a
    powerful SPI firewall to protect your PCs against intruders and most known
    Internet attacks, and supports VPN pass-through. The router also provides easy
    configuration with the web browser-based configuration utility.
    The incredible speed and the fully automatic QoS function of the 802.11n
    (draft2.0) Gigabit Router is ideal for media-centric applications like streaming
    video, gaming, and VoIP telephony. It is designed to run multiple media-intense
    data streams through the network at the same time, with no degradation in
    performance.

    4



  • Page 5

    WL-308 Gaming Router

    Full Manual

    Features & Benefits
    Features
    High Speed Data Rate Up to

    Benefits
    Capable of handling heavy data

    300Mbps

    payloads such as MPEG video streaming

    IEEE 802.11n draft Compliant and
    backward compatible with
    802.11b/g

    Fully interoperable with IEEE
    802.11b/g/n devices

    Four built-in 10/100/1000Mbps
    Gigabit Switch Ports (AutoCrossover)

    Scalability, able to extend your network

    Supports DNS/ DDNS

    Lets users assign a fixed host and
    domain name to a dynamic Internet IP
    address.
    Shares single Internet account and
    provides a type of firewall by hiding
    internal IP addresses for keeping hacker
    out
    Avoids unallowable users sharing
    bandwidth, increases efficiency of the
    network
    Avoids the attacks of Hackers or Viruses
    from Internet

    Supports NAT (Network Address
    Translation)/NAPT

    Hide SSID

    Firewall supports Virtual Server
    Mapping, DMZ, IP Filter, ICMP
    Blocking, SPI
    Support 802.1x authenticator,
    802.11i (WPA/WPA2, AES), VPN
    pass-thru mechanisms

    Provide mutual authentication (Client
    and dynamic encryption keys to enhance
    security

    WDS (Wireless Distribution System)

    Make wireless AP and Bridge mode
    simultaneously as a wireless repeater

    Universal Plug and Play (UPnP™)

    Filter Scheduling

    Works with most Internet gaming and
    instant messaging applications for
    automatic Internet access
    The filter can be scheduled by days,
    hours or minutes for easy management

    Real time alert

    The detection of a list for Hacker log-in
    information

    Web configuration

    Helps administrators to remotely
    configure or manage the Router via
    Telnet/Web-browser

    5



  • Page 6

    WL-308 Gaming Router

    Full Manual

    Package Contents
    Open the package carefully, and make sure that none of the items listed below
    are missing. Do not discard the packing materials; in case of return, the device
    must be shipped in its original package.
    -

    One WL-308 Gaming Router
    One 12V/1.25A Power Adapter
    Three 3dBi 2.4GHz Dipole Antennas
    UTP Cable
    One CD-ROM with User’s Manual
    One Quick Installation Guide
    Warranty Card

    Safety Guidelines
    In order to reduce the risk of fire, electric shock and injury, please adhere to the
    following safety guidelines.
    -

    Carefully follow the instructions in this manual; also follow all instruction
    labels on the device.
    Except for the power adapter supplied, the device should not be
    connected to any other adapters.
    Do not spill liquid of any kind on the device.
    Do not place the device on an unstable stand or table. The device may
    drop and become damaged.
    Do not expose the device to direct sunlight.
    Do not place any hot devices close to this device, as they may degrade
    or cause damage to the device.
    Do not place any heavy objects on top of the device.
    Do not use liquid cleaners or aerosol cleaners. Use a soft dry cloth for
    cleaning.

    6



  • Page 7

    WL-308 Gaming Router

    Full Manual

    Product Layout

    Item
    1

    Label
    LAN Ports (1 – 4)

    2

    Link Port

    3

    DC Connector

    4

    WPS

    Description
    Use an Ethernet cable to connect each port to a
    computer on your Local Area Network (LAN).
    Use an Ethernet cable to connect this port to your
    WAN router/modem.
    Use the power cable and connect the adapter to the
    power socket on the wall, and the DC inlet into the
    DC connector.
    WPS (Wireless Push Button) is used for Wi-Fi
    Protected Setup. By pressing this button, the
    security settings of the device will automatically
    synchronize with other wireless devices on your
    network that support Wi-Fi Protected Setup.

    7



  • Page 8

    WL-308 Gaming Router

    Full Manual

    Back label

    Item
    1

    Label
    LAN LED

    2

    Link LED

    3

    WLAN LED

    4

    Power LED

    Description
    This LED will light up once an Ethernet cable is
    connected to one of the LAN ports.
    This LED will light up once an Ethernet cable is
    connected to WAN (Internet) port.
    This LED will light up once the RF (wireless LAN)
    feature is enabled
    This LED will light up once the power cable is
    connected to the DC connector.

    8



  • Page 9

    WL-308 Gaming Router

    Full Manual

    System Requirements
    The following are the minimum system requirements in order configure the
    device:
    -

    PC/Notebook
    Operating System – Microsoft Windows XP/2000/VISTA
    1 Free Ethernet port
    Wi-Fi card/USB dongle (802.11 b/g/n) – optional
    External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45)
    PC with a web-browser (Internet Explorer, Safari, Firefox, Opera)
    Ethernet compatible CAT5 cables

    9



  • Page 10

    WL-308 Gaming Router

    Full Manual

    2 Understanding the Hardware
    Hardware Installation
    You can place the WL-308 on a desk or other flat surface, or you can mount it on
    a wall. For optimal performance, place your Wireless Broadband Router in the
    center of your office (or your home) in a location that is away from any potential
    source of interference, such as a metal wall or microwave oven. This location
    must be close to a power connection and your ADSL/Cable modem.
    Plug one end of the Ethernet cable into the LAN port of the device and another
    end into your PC/Notebook.

    Plug one end of another Ethernet cable to the WAN port of the device and the
    other end into you cable/DSL modem (Internet).

    Insert the DC-outlet of the power adapter into the port labeled “DC-IN” and the
    other end into a power socket on the wall.

    10



  • Page 11

    WL-308 Gaming Router

    Full Manual

    IP Address Configuration
    This device can be configured as a Bridge/Router or Access Point. The default IP
    address of the device is 192.168.0.1. In order to log into this device, you must first
    configure the TCP/IP settings of your PC/Notebook.
    1. In the control panel, double click Network Connections and then double click
    on the connection of your Network Interface Card (NIC). You will then see the
    following screen.

    2. Select Internet Protocol (TCP/IP) and then click on the Properties button.
    This will allow you to configure the TCP/IP settings of your PC/Notebook.

    Select both [Obtain an IP address automatically] and [Obtain DNS
    server address automatically].
    3. Click on the OK button to close this window, and once again to close LAN
    properties window.
    11



  • Page 12

    WL-308 Gaming Router

    Full Manual

    3 Internet Connection Wizard
    This device offers a quick and simple configuration through the use of a wizard.
    This chapter describes how to use the wizard to configure the internet settings.
    Please refer to Chapter 6 in order to configure the more advanced features of the
    device.

    Logging In
    To configure the device, open a web browser.

    Type http://192.168.0.1 in the address bar and press [Enter].
    After connecting to the IP address, the web-browser will display the login page.

    Fill in the username and password. The default credentials are shown below:

    Username:
    Password:

    admin
    admin

    Click on the Wizard button to begin the process.

    12



  • Page 13

    WL-308 Gaming Router

    Full Manual

    Select your country from the Country list. Select your internet provider. Click
    Next.

    Depending on the chosen provider, you may need to enter your user name and
    password, MAC address or hostname in the following window. After you have
    entered the correct information, click Next.

    Click APPLY to complete the configuration.

    13



  • Page 14

    WL-308 Gaming Router

    Full Manual

    4 Wi-Fi Protected Setup Wizard
    Wi-Fi Protected Setup is a feature that locks the wireless security settings and
    prevents the settings from being changed by any new external registrar using its
    PIN. Devices can still be added to the wireless network using Wi-Fi Protected
    Setup.
    Please refer to Chapter 5 in order to configure the more advanced features of the
    device

    Logging In
    Open a web browser and type in the IP address (default: http://192.168.0.1),
    the web-browser will display the login page.

    Fill in the username and password. The default credentials are shown below:
    Username:
    Password:

    admin
    admin

    14



  • Page 15

    WL-308 Gaming Router

    Full Manual

    Add a Wireless Device
    Click on Basic -> Wireless and click on the Add Wireless Device Wizard
    button.

    The wireless wizard will inform you that there are two major steps in the process.
    o Select the configuration method for your wireless network
    o Connect your wireless device

    Click on the Next button to continue.
    You may select from three available options:
    o PIN: Select this radio button if your wireless device supports PIN
    o Push Button: Select this radio button if your wireless device supports
    push button.
    o Manual: Select the radio button if you would like to setup your
    wireless device manually. Refer to chapter 5 in order to manually
    configure the device.
    The wizard will either display the wireless network settings to guide you through
    manual configuration, prompt you to enter the PIN for the device, or ask you to
    press the configuration button on the device. If the device supports Wi-Fi
    Protected Setup and has a configuration button, you can add it to the network by
    pressing the configuration button on the device and then the on the router within
    60 seconds. The status LED on the router will flash three times if the device has
    been successfully added to the network.

    15



  • Page 16

    WL-308 Gaming Router

    Full Manual

    There are several ways to add a wireless device to your network. Access to the
    wireless network is controlled by a registrar. A registrar only allows devices onto
    the wireless network if you have entered the PIN, or pressed a special Wi-Fi
    Protected Setup button on the device. The router acts as a registrar for the
    network, although other devices may act as a registrar as well.

    Using the PIN
    A PIN is a unique number that can be used to add the router to an existing
    network or to create a new network. The default PIN may be printed on the
    bottom of the router. For extra security, a new PIN can be generated. You can
    restore the default PIN at any time. Only the Administrator ("admin" account)
    can change or reset the PIN.
    Select the PIN radio button and then click on the Next button.

    Specify the PIN and then click on the Connect button.
    The wireless device configuration is now complete.

    Using the Push Button
    WPS is used for Wi-Fi Protected Setup. By pressing the WPS button on the top
    panel of the device, the security settings of the device will automatically
    synchronize with other wireless devices on your network that support Wi-Fi
    Protected Setup
    If the device supports Wi-Fi Protected Setup and has a configuration button, you
    can add it to the network by pressing the configuration button on the device and
    then the one the router within 60 seconds. The status LED on the router will flash
    three times if the device has been successfully added to the network.

    16



  • Page 17

    WL-308 Gaming Router

    Full Manual

    Select the Push Button radio button and then click on the Next button.

    Press the WPS button on the device (which is located on the left side of the front
    panel) and then click on the Next button.

    17



  • Page 18

    WL-308 Gaming Router

    Full Manual

    5 Advanced Web Configuration
    Logging In
    Open a web browser and type in the IP address (default: http://192.168.0.1),
    the web-browser will display the login page.

    Fill in the username and password. The default credentials are shown below:
    Username:
    Password:

    admin
    admin

    After logging in you will see the graphical user interface (GUI) of the device. The
    navigation menu on the top is divided into six main sections:
    1.
    2.
    3.
    4.
    5.
    6.

    Home: This shows the basic status of the router.
    Wizard: The setup wizard which will guide you through the initial setup.
    Basic: This menu includes the network settings, wireless settings and WAN
    settings.
    Firewall: This menu includes virtual server, special applications, port
    forwarding, access control, etc.
    Advanced Settings: This menu includes DDNS, the Stream engine, MAC
    address filter, web filter etc.
    Toolbox: This menu displays the Time zone, Firmware update, Password
    settings etc.

    18



  • Page 19

    WL-308 Gaming Router

    Full Manual

    5.1 Home
    Device
    All of your Internet and network connection details are displayed on this page.
    The firmware version is also displayed here.

    Wireless
    Click on the Wireless link in the navigation menu. The wireless section allows
    you to view the wireless clients that are connected to the device.

    -

    MAC Address: The Ethernet ID (MAC address) of the wireless client.
    IP Address: The LAN-side IP address of the client.
    Mode: The transmission standard being used by the client. Values are 11a,
    11b, 11g, or 11n for 802.11a, 802.11b, 802.11g, or 802.11n respectively.
    Rate: The actual transmission rate of the client in megabits per second.
    Signal: This is a relative measure of signal quality. The value is expressed as
    a percentage of theoretical best quality. Signal quality can be reduced by
    distance, by interference from other radio-frequency sources (such as
    cordless telephones or neighboring wireless networks), and by obstacles
    between the router and the wireless device.

    19



  • Page 20

    WL-308 Gaming Router

    Full Manual

    WISH
    The WISH Sessions page displays full details of active local wireless sessions
    through your router when WISH has been enabled. A WISH session is a
    conversation between a program or application on a wirelessly connected
    LAN-side computer and another computer, however connected.

    -

    -

    -

    Originator: The IP address and, where appropriate, port number of the
    computer that originated a network connection.
    Target: The IP address and, where appropriate, port number of the
    computer to which a network connection has been made.
    Protocol: The communications protocol used for the conversation.
    State: State for sessions that use the TCP protocol.
    o NO: None -- This entry is used as a placeholder for a future
    connection that may occur.
    o SS: SYN Sent -- One of the systems is attempting to start a
    connection.
    o EST: Established -- the connection is passing data.
    o FW: FIN Wait -- The client system has requested that the connection
    be stopped.
    o CW: Close Wait -- the server system has requested that the
    connection be stopped.
    o TW: Time Wait -- Waiting for a short time while a connection that was
    in FIN Wait is fully closed.
    o LA: Last ACK -- Waiting for a short time while a connection that was in
    Close Wait is fully closed.
    o CL: Closed -- The connection is no longer active but the session is
    being tracked in case there are any retransmitted packets still
    pending.
    Priority: The priority given to packets sent wirelessly over this
    conversation by the WISH logic. The priorities are:
    o BK: Background (least urgent).
    o BE: Best Effort.
    o VI: Video.
    o VO: Voice (most urgent).
    Time Out: The number of seconds of idle time until the router considers
    the session terminated. The initial value of Time Out depends on the type
    and state of the connection.
    o 300 seconds - UDP connections.
    o 240 seconds - Reset or closed TCP connections. The connection does
    not close instantly so that lingering packets can pass or the connection
    can be re-established.
    o 7800 seconds - Established or closing TCP connections.

    20



  • Page 21

    WL-308 Gaming Router

    Full Manual

    Logs
    Click on the Logs link in the navigation menu. The router automatically logs
    (records) events of possible interest in its internal memory. If there is not enough
    internal memory for all events, logs of older events are deleted, but logs of the
    latest events are retained. The Logs option allows you to view the router logs.
    You can define what types of events you want to view and the level of events to
    view. This router also has external Syslog Server support so you can send the log
    files to a computer on your network that is running a Syslog utility.

    -

    What to View: Select the features of which you would like to view the
    logs: Firewall & Security, System, or Router Status.
    View Levels: Select the warning levels for the logs: Critical, Warning, or
    Informational.
    Click on the Apply Log Settings Now to make the new log effective.

    21



  • Page 22

    WL-308 Gaming Router

    Full Manual

    Stats
    Click on the Statistics link in the navigation menu. This page displays the
    transmitted and received packet statistics of the wired (LAN & WAN) and wireless
    interface. Click on the Refresh button to refresh the statistics.

    22



  • Page 23

    WL-308 Gaming Router

    Full Manual

    DHCP
    Click on the DHCP link in the navigation menu. This page displays the routing
    details configured for your router.

    Local: The IP address and, where appropriate, port number of the local
    application.
    NAT: The port number of the LAN-side application as viewed by the WAN-side
    application.
    Internet: The IP address and, where appropriate, port number of the
    application on the Internet.
    Protocol: The communications protocol used for the conversation.
    State: State for sessions that use the TCP protocol.
    o NO: None -- This entry is used as a placeholder for a future
    connection that may occur.
    o SS: SYN Sent -- One of the systems is attempting to start a
    connection.
    o EST: Established -- the connection is passing data.
    o FW: FIN Wait -- The client system has requested that the connection
    be stopped.
    o CW: Close Wait -- the server system has requested that the
    connection be stopped.
    o TW: Time Wait -- Waiting for a short time while a connection that was
    in FIN Wait is fully closed.
    o LA: Last ACK -- Waiting for a short time while a connection that was in
    Close Wait is fully closed.
    o CL: Closed -- The connection is no longer active but the session is
    being tracked in case there are any retransmitted packets still
    pending.
    Priority: The priority given to packets sent wirelessly over this conversation
    by the WISH logic. The priorities are:
    o BK: Background (least urgent).
    o BE: Best Effort.
    o VI: Video.
    o VO: Voice (most urgent).
    Time Out: The number of seconds of idle time until the router considers the
    session terminated. The initial value of Time Out depends on the type and
    state of the connection.
    o 300 seconds - UDP connections.
    o 240 seconds - Reset or closed TCP connections. The connection does
    not close instantly so that lingering packets can pass or the connection
    can be re-established.
    o 7800 seconds - Established or closing TCP connections.

    23



  • Page 24

    WL-308 Gaming Router

    Full Manual

    5.2 BASIC
    Network
    This device can be configured as a Router or a Bridge. Select Router mode if
    the WAN port is connected to the Internet. Select Bridge if the device is
    connected to a local network downstream from another router.
    Bridge Mode
    In this mode, the device functions as a bridge between the network on its WAN
    port and the devices on its LAN port and those connected to it wirelessly. Select
    the Bridge Mode radio button.

    WAN Port Mode: Select the Bridge Mode radio button.
    Router IP Address: Specify the IP address of this device.
    Subnet Mask: Specify the subnet mask for the IP address.
    Default Gateway: Specify the IP address of the upstream router.
    Primary/Secondary DNS: Specify the IP address of the DNS server.
    Click on the Apply button to store these settings.

    24



  • Page 25

    WL-308 Gaming Router

    Full Manual

    Router Mode
    In this mode, the device functions as a NAT router and is connected to the
    Internet. Select the Router Mode radio button.

    WAN Port Mode: Select the Router Mode radio button.
    Router IP Address: Specify the IP address of this device.
    Subnet Mask: Specify the subnet mask for the IP address.
    Local Domain Name: This entry is optional. Enter a domain name for the
    local network. LAN computers will assume this domain name when they get
    an address from the router's built in DHCP server. So, for example, if you
    enter mynetwork.net here, and you have a LAN side laptop with a name of
    mark, that laptop will be known as mark.mynetwork.net. Note, however, the
    entered domain name can be overridden by the one obtained from the
    router's upstream DHCP server.
    Enable DNS Relay: Place a check in this box to enable the DNS relay
    feature. When DNS Relay is enabled, the router plays the role of a DNS
    server. DNS requests sent to the router are forwarded to the ISP's DNS
    server. This provides a constant DNS address that LAN computers can use,
    even when the router obtains a different DNS server address from the ISP
    upon re-establishing the WAN connection. You should disable DNS relay if you
    implement a LAN-side DNS server as a virtual server.
    Click on the Apply button to store these settings.

    25



  • Page 26

    WL-308 Gaming Router

    Full Manual

    Wireless
    These options allow you to enable/disable the wireless interface, switch between
    the 11n, 11b/g and 11b radio band and channel frequency

    Enable Wireless: Place a check in this box to enable the wireless interface.
    It is enabled by default.
    Wireless Network Name: The SSID is a unique named shared amongst all
    the points of the wireless network. The SSID must be identical on all points of
    the wireless network and cannot exceed 32 characters.
    802.11 Mode: Select the IEEE 802.11 mode from the drop-down list. For
    example, if you are sure that the wireless network will be using only IEEE
    802.11g clients, then it is recommended to select 802.11g only instead of
    2.4 GHz B+G, which will reduce the performance of the wireless network.
    You may also select Mixed 802.11n, 802.11g and 802.11b. If all of the
    wireless devices you want to connect with this router can connect in the same
    transmission mode, you can improve performance slightly by choosing the
    appropriate "Only" mode. If you have some devices that use a different
    transmission mode, choose the appropriate "Mixed" mode.
    Wireless Channel: Select a channel from the drop-down list. The channels
    available are based on the country’s regulation. A wireless network uses
    specific channels in the wireless spectrum to handle communication between
    clients. Some channels in your area may have interference from other
    electronic devices. Choose the clearest channel to help optimize the
    performance and coverage of your wireless network.
    Transmission Rate: Select a transmission rate from the drop-down list. It is
    recommended to use the Best (automatic) option.
    Channel Width: Select a channel width from the drop-down list.
    Visibility Status: Select Visible or Invisible. This is the SSID broadcast
    feature. When this option is set to Visible, your wireless network name is
    broadcast to anyone within the range of your signal. If you're not using
    26



  • Page 27

    WL-308 Gaming Router

    Full Manual

    encryption then they could connect to your network. When Invisible mode is
    enabled, you must enter the Wireless Network Name (SSID) on the client
    manually to connect to the network.
    Click on the Apply button to store these settings.

    Wireless Security Mode
    To protect your privacy this router supports several types of wireless security:
    WEP WPA, WPA2, and WPA-Mixed. WEP is the original wireless encryption
    standard. WPA provides a higher level of security. The following section describes
    the security configuration in detail.

    WEP (Wired Equivalent Privacy)
    Select the WEP radio button if your wireless network uses WEP encryption. WEP
    is an acronym for Wired Equivalent Privacy, and is a security protocol that
    provides the same level of security for wireless networks as for a wired network.
    WEP is not as secure as WPA encryption. To gain access to a WEP network, you
    must know the key. The key is a string of characters that you create. When using
    WEP, you must determine the level of encryption. The type of encryption
    determines the key length. 128-bit encryption requires a longer key than 64-bit
    encryption. Keys are defined by entering in a string in HEX (hexadecimal - using
    characters 0-9, A-F) or ASCII (American Standard Code for Information
    Interchange - alphanumeric characters) format. ASCII format is provided so you
    can enter a string that is easier to remember. The ASCII string is converted to
    HEX for use over the network. Four keys can be defined so that you can change
    keys easily. A default key is selected for use on the network.

    WEP Key Length: Select a 64-bit or 128-bit WEP key length from the dropdown list.
    WEP Key 1-4: You may enter four different WEP keys.
    Default WEP Key: You may use up to four different keys for four different
    networks. Select the current key that will be used.
    27



  • Page 28

    WL-308 Gaming Router

    Full Manual

    Authentication: Select Open, or Shared Key. Authentication method from
    the drop-down list. An open system allows any client to authenticate as long
    as it conforms to any MAC address filter policies that may have been set. All
    authentication packets are transmitted without encryption. Shared Key sends
    an unencrypted challenge text string to any device attempting to
    communicate with the AP. The device requesting authentication encrypts the
    challenge text and sends it back to the access point. If the challenge text is
    encrypted correctly, the access point allows the requesting device to
    authenticate. It is recommended to select Auto if you are not sure which
    authentication type is used.
    Click on the Apply button to store these settings.

    WPA Personal (Wi-Fi Protected Access)
    Select the WPA-Personal radio button if your wireless network uses WPA
    encryption. WPA (Wi-Fi Protected Access) was designed to improve upon the
    security features of WEP (Wired Equivalent Privacy). The technology is designed
    to work with existing Wi-Fi products that have been enabled with WEP. WPA
    provides improved data encryption through the Temporal Integrity Protocol
    (TKIP), which scrambles the keys using a hashing algorithm and by adding an
    integrity checking feature which makes sure that keys haven’t been tampered
    with.

    WPA Mode: Select the Auto WPA / WPA2 from the drop-down list.
    Cipher Type: Select TKIP and AES as the cipher suite. The encryption
    algorithm used to secure the data communication.
    28



  • Page 29

    WL-308 Gaming Router

    o
    o

    o

    Full Manual

    TKIP. Use TKIP only. TKIP (Temporal Key Integrity Protocol) provides
    per-packet key generation and is based on WEP.
    AES. Use AES only. AES (Advanced Encryption Standard) is a very
    secure block based encryption. Note that, if the bridge uses the AES
    option, the bridge can associate with the access point only if the
    access point is also set to use only AES.
    TKIP and AES. The bridge negotiates the cipher type with the access
    point, and uses AES when available.

    Group Key Update Interval: Specify the number of seconds before the
    group key used for broadcast and multicast data is changed.
    Pre-Shared Key: The key is entered as a pass-phrase of up to 63
    alphanumeric characters in ASCII (American Standard Code for Information
    Interchange) format at both ends of the wireless connection. It cannot be
    shorter than eight characters, although for proper security it needs to be of
    ample length and should not be a commonly known phrase. This phrase is
    used to generate session keys that are unique for each wireless client.
    Click on the Apply button to store these settings.
    WPA Enterprise (Wi-Fi Protected Access & 802.1x)
    Select the WPA-Enterprise radio button if your wireless network uses WPA
    encryption. WPA (Wi-Fi Protected Access) was designed to improve upon the
    security features of WEP (Wired Equivalent Privacy). The technology is designed
    to work with existing Wi-Fi products that have been enabled with WEP. WPA
    provides improved data encryption through the Temporal Integrity Protocol
    (TKIP), which scrambles the keys using a hashing algorithm and by adding an
    integrity checking feature which makes sure that keys haven’t been tampered
    with.
    This option works with a RADIUS Server to authenticate wireless clients. Wireless
    clients should have established the necessary credentials before attempting to
    authenticate to the Server through this Gateway. Furthermore, it may be
    necessary to configure the RADIUS Server to allow this Gateway to authenticate
    users.

    WPA Mode: Select the WPA / WPA2 from the drop-down list.
    Cipher Type: Select TKIP or AES as the cipher suite. The encryption
    algorithm used to secure the data communication.

    29



  • Page 30

    WL-308 Gaming Router

    o
    o

    o

    Full Manual

    TKIP. Use TKIP only. TKIP (Temporal Key Integrity Protocol) provides
    per-packet key generation and is based on WEP.
    AES. Use AES only. AES (Advanced Encryption Standard) is a very
    secure block based encryption. Note that, if the bridge uses the AES
    option, the bridge can associate with the access point only if the
    access point is also set to use only AES.
    TKIP and AES. The bridge negotiates the cipher type with the access
    point, and uses AES when available.

    Group Key Update Interval: Specify the number of seconds before the
    group key used for broadcast and multicast data is changed.
    Authentication Timeout: Specify the number of minutes after which the
    client will be required to re-authenticate.
    RADIUS Server IP Address: Specify the IP address of the RADIUS server.
    RADIUS Server Port: Specify the port number of the RADIUS server, the
    default port is 1812.
    RADIUS Server Shared Secret: Specify the pass-phrase that is matched on
    the RADIUS Server.
    MAC Address Authentication: Place a check in this box if you would like the
    user to always authenticate using the same computer.
    Optional Backup RADIUS server: This option enables configuration of an
    optional second RADIUS server. A second RADIUS server can be used as
    backup for the primary RADIUS server. The second RADIUS server is
    consulted only when the primary server is not available or not responding.
    Click on the Apply button to store these settings.

    30



  • Page 31

    WL-308 Gaming Router

    Full Manual

    WAN
    The device offers several types of WAN connections in order to connect to the
    Internet.
    -

    Static IP Address
    Dynamic IP Address
    PPPoE
    PPTP

    Select the type of Internet Connection from the drop-down list.

    31



  • Page 32

    WL-308 Gaming Router

    Full Manual

    Static IP Address Configuration
    The WAN interface can be configured as Static IP address. In this type of
    connection, your ISP provides you with a dedicated IP address (which does not
    change as DHCP).
    Select Static IP from the My Internet Connection drop-down list.

    IP Address: Specify the IP address for this device, which is assigned by your
    ISP.
    Subnet Mask: Specify the subnet mask for this IP address, which is assigned
    by your ISP.
    Default Gateway: Specify the IP address of the default gateway, which is
    assigned by your ISP.
    Primary / Secondary DNS Address: Specify the primary and secondary IP
    address, which is assigned by your ISP.

    32



  • Page 33

    WL-308 Gaming Router

    Full Manual

    MTU: The Maximum Transmission Unit (MTU) is a parameter that determines
    the largest packet size (in bytes) that the router will send to the WAN. If LAN
    devices send larger packets, the router will break them into smaller packets.
    Ideally, you should set this to match the MTU of the connection to your ISP.
    Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for
    a PPPoE connection. If the router's MTU is set too high, packets will be
    fragmented downstream. If the router's MTU is set too low, the router will
    fragment packets unnecessarily and in extreme cases may be unable to
    establish some connections. In either case, network performance can suffer.
    MAC Address: If you need to change the MAC address of the router's WANside Ethernet interface, either type in an alternate MAC address (for example,
    the MAC address of the router initially connected to the ISP) or click on Clone
    Your PCs MAC Address.
    Click on the Apply button to store these settings. DHCP Connection (Dynamic IP
    Address)

    33



  • Page 34

    WL-308 Gaming Router

    Full Manual

    Dynamic IP Address (DHCP) Configuration
    The WAN interface can be configured as a DHCP Client in which the ISP provides
    the IP address to the device. This is also known as Dynamic IP.
    Select the Dynamic IP (DHCP) from the My Internet Connection drop-down
    list.

    Host Name: Specify a host name to define your system or connection.
    Use Unicasting: This option is normally turned off, and should remain off as
    long as the WAN-side DHCP server correctly provides an IP address to the
    router. However, if the router cannot obtain an IP address from the DHCP
    server, the DHCP server may be one that works better with unicast
    responses. In this case, turn the Unicasting option on, and observe whether
    the router can obtain an IP address. In this mode, the router accepts unicast
    responses from the DHCP server instead of broadcast responses.
    34



  • Page 35

    WL-308 Gaming Router

    Full Manual

    Primary / Secondary DNS Address: Specify the primary and secondary IP
    address, which are assigned by your ISP.
    MTU: The Maximum Transmission Unit (MTU) is a parameter that determines
    the largest packet size (in bytes) that the router will send to the WAN. If LAN
    devices send larger packets, the router will break them into smaller packets.
    Ideally, you should set this to match the MTU of the connection to your ISP.
    Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for
    a PPPoE connection. If the router's MTU is set too high, packets will be
    fragmented downstream. If the router's MTU is set too low, the router will
    fragment packets unnecessarily and in extreme cases may be unable to
    establish some connections. In either case, network performance can suffer.
    MAC Address: If you need to change the MAC address of the router's WANside Ethernet interface, either type in an alternate MAC address (for example,
    the MAC address of the router initially connected to the ISP) or click on Clone
    Your PCs MAC Address.
    Click on the Apply button to store these settings.

    35



  • Page 36

    WL-308 Gaming Router

    Full Manual

    PPPoE (Point-to-Point Protocol over Ethernet)
    The WAN interface can be configured as PPPoE. This type of connection is usually
    used for a DSL service and requires a username and password to connect.
    Select the PPPoE from the My Internet Connection drop-down list.

    Address Mode: PPPoE can be used with a dynamic or static IP address. If
    you select the Dynamic IP radio button, then the IP address in the next field
    is not required. However, if you select the Static IP radio button, then the IP
    address in the next field is required.
    User Name: Specify the user name which is provided by your ISP.
    Password: Specify the password which is provided by your ISP, and then
    verify it once again in the next field.
    Service Name: Specify the name of the ISP.
    Reconnect Mode: Select a reconnection time: Always on (A connection to
    the Internet is always maintained), On demand (A connection to the Internet
    36



  • Page 37

    WL-308 Gaming Router

    Full Manual

    is made as needed), Manual: You have to open up the Web-based
    management interface and click the Connect button manually any time that
    you wish to connect to the Internet.
    Maximum Idle Time: Specify the time after which the router will
    automatically disconnect the current session when no data-traffic has been
    detected for the set period of time.
    Primary / Secondary DNS Address: Specify the primary and secondary IP
    address, which is assigned by your ISP.
    MTU: The Maximum Transmission Unit (MTU) is a parameter that determines
    the largest packet size (in bytes) that the router will send to the WAN. If LAN
    devices send larger packets, the router will break them into smaller packets.
    Ideally, you should set this to match the MTU of the connection to your ISP.
    Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for
    a PPPoE connection. If the router's MTU is set too high, packets will be
    fragmented downstream. If the router's MTU is set too low, the router will
    fragment packets unnecessarily and in extreme cases may be unable to
    establish some connections. In either case, network performance can suffer.
    MAC Address: If you need to change the MAC address of the router's WANside Ethernet interface, either type in an alternate MAC address (for example,
    the MAC address of the router initially connected to the ISP) or click on Clone
    Your PCs MAC Address.
    Click on the Apply button to store these settings.

    37



  • Page 38

    WL-308 Gaming Router

    Full Manual

    PPTP (Point-to-Point Tunneling Protocol)
    The WAN interface can be configured as PPTP. PPTP (Point to Point Tunneling
    Protocol) uses a virtual private network to connect to your ISP. This method of
    connection is primarily used in Europe. This method of connection requires you to
    enter a username and password (provided by your ISP) to gain access to the
    Internet. The supported authentication protocols are PAP and CHAP.
    Select the PPTP from the My Internet Connection drop-down list.

    Address Mode: PPTP can be used with a dynamic or static IP address. If you
    select the Dynamic IP radio button, then the IIP address in the next field is
    not required. However, if you select the Static IP radio button, then the IP
    address in the next field is required.
    PPTP Address: Specify the IP address
    PPTP Subnet Mask: Specify the subnet mask for the IP address.
    38



  • Page 39

    WL-308 Gaming Router

    Full Manual

    PPTP Gateway IP Address: Specify the IP address of the PPTP gateway.
    PPTP Server IP Address: If the PPTP Server’s IP address is different from
    the default gateway, then you may specify it here.
    User Name: Specify the user name which is provided by your ISP.
    Password: Specify the password which is provided by your ISP, and then
    verify it once again in the next field.
    Reconnect Mode: Select a reconnection time:
    o Always on: A connection to the Internet is always maintained.
    o On demand: A connection to the Internet is made as needed.
    o Manual: You have to open up the Web-based management
    interface and click the Connect button manually any time that you
    wish to connect to the Internet.
    Maximum Idle Time: Specify the time after which the router will
    automatically disconnect the current session when no data-traffic has been
    detected for the set period of time.
    Primary / Secondary DNS Address: Specify the primary and secondary IP
    address, which is assigned by your ISP.
    MTU: The Maximum Transmission Unit (MTU) is a parameter that determines
    the largest packet size (in bytes) that the router will send to the WAN. If LAN
    devices send larger packets, the router will break them into smaller packets.
    Ideally, you should set this to match the MTU of the connection to your ISP.
    Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for
    a PPPoE connection. If the router's MTU is set too high, packets will be
    fragmented downstream. If the router's MTU is set too low, the router will
    fragment packets unnecessarily and in extreme cases may be unable to
    establish some connections. In either case, network performance can suffer.
    MAC Address: If you need to change the MAC address of the router's WANside Ethernet interface, either type in an alternate MAC address (for example,
    the MAC address of the router initially connected to the ISP) or click on Clone
    Your PCs MAC Address.
    Click on the Apply button to store these settings.

    39



  • Page 40

    WL-308 Gaming Router

    Full Manual

    Advanced Wireless
    This page allows you to configure the fragmentation threshold, RTS threshold,
    beacon period, transmit power, DTIM interval, wireless isolation, WMM and WDS
    (wireless distribution system).

    Transmit Power: You may control the output power of the device by
    selecting a value from the drop-down list. This feature can be helpful in
    restricting the coverage area of the wireless network.
    Beacon Period: Beacons are packets sent by a wireless Access Point to
    synchronize wireless devices. Specify a Beacon Period value between 20 and
    1000. The default value is set to 100 milliseconds.
    RTS Threshold: Packets over the specified size will use the RTS/CTS
    mechanism to maintain performance in noisy networks and preventing hidden
    nodes from degrading the performance. Specify a value between 1 and
    65535. The default value is 2346.
    Fragment Threshold: Packets over the specified size will be fragmented in
    order to improve performance on noisy networks. Specify a value between
    256 and 65535. The default value is 2346.
    DTIM Interval: A DTIM is a countdown informing clients of the next window
    for listening to broadcast and multicast messages. When the wireless Access
    Point has buffered broadcast or multicast messages for associated clients, it
    sends the next DTIM with a DTIM Interval value. Wireless clients detect the
    beacons and awaken to receive the broadcast and multicast messages. The
    default value is 1. Valid settings are between 1 and 255.
    Wireless Isolation: Place a check in this box in order to prevent associated
    wireless clients from communicating with each other.
    WMM Enable: Enable WMM in order to help control latency and jitter when
    transmitting multimedia content over a wireless connection.

    40



  • Page 41

    WL-308 Gaming Router

    Full Manual

    WDS: Place a check in this box to enable WDS (Wireless Distribution
    System). When WDS is enabled, this access point functions as a wireless
    repeater and is able to wirelessly communicate with other APs via WDS links.
    Note that WDS is incompatible with WPA -- both features cannot be used at
    the same time. A WDS link is bidirectional; so this AP must know the MAC
    Address (creates the WDS link) of the other AP, and the other AP must have a
    WDS link back to this AP. Make sure the APs are configured with same
    channel number.
    WDS AP MAC Address: Specify one-half of the WDS link. The other AP must
    also have the MAC address of this AP to create the WDS link back to this AP.
    Click on the Apply button to store these changes.

    Advanced Network
    In this section you can configure the UPnP, WAN Ping, WAN port speed, multicast
    streams, and PPPoE pass-through settings.

    Enable UPnP: Place a check in this box to enable UPnP. UPnP is short for
    Universal Plug and Play, which is a networking architecture that provides
    compatibility among networking equipment, software, and peripherals. This
    router has optional UPnP capability, and can work with other UPnP devices
    and software.
    Allow Users to disable Internet Access: Place a check in this box if you
    would like to allow to user to terminate the WAN session.
    Allow Users to modify Virtual Server Mappings: Place a check in this box
    if you would like the users to add, modify, or delete server mapping entries.
    Enable WAN Ping Respond: Place a check in this box if you would like this
    device to be pinged from the WAN side.
    WAN Ping Inbound Filter: You may select the computer that may ping this
    device from the WAN side.

    41



  • Page 42

    WL-308 Gaming Router

    Full Manual

    WAN Port Speed: You may select a WAN port speed from the drop-down
    list. It is recommended that you select Auto.
    Enable Multicast Streams: Place a check in this box to enable multicast
    streams. The router uses the IGMP protocol to support efficient multicasting - transmission of identical content, such as multimedia, from a source to a
    number of recipients. This option must be enabled if any applications on the
    LAN participate in a multicast group. If you have a multimedia LAN application
    that is not receiving content as expected, try enabling this option.
    Enable PPPoE Pass Through: Place a check in this box to enable PPPoE
    pass-through. This option controls whether LAN computers can act as PPPoE
    clients and negotiate the PPP sessions through the router over the WAN
    ethernet link. Enabling this option allows LAN computers to act as PPPoE
    clients. Disabling this option prevents LAN computers from establishing PPPoE
    pass-through connections.
    Click on the Apply button to store these settings.

    42



  • Page 43

    WL-308 Gaming Router

    Full Manual

    5.3 Firewall
    Virtual Server
    The Virtual Server option gives Internet users access to services on your LAN.
    This feature is useful for hosting online services such as FTP, Web, or game
    servers. For each Virtual Server, you define a public port on your router for
    redirection to an internal LAN IP Address and LAN port.

    Enable: Place a check in this box to enable the virtual server rule.
    Name: Assign a meaningful name to the virtual server, for example Web
    Server. Several well-known types of virtual server are available from the
    Application Name drop-down list. Selecting one of these entries fills some of
    the remaining parameters with standard values for that type of server.
    IP Address: Specify the IP address for the virtual server entry.
    Protocol: Specify a protocol or select one from the drop-down list.
    Public Port: Specify the public port number.
    Private Port: Specify the private port number.
    Schedule: Select a schedule, Always, or Never from the drop-down list. If
    a schedule does not exist, you may create it in the Tools > Schedule section.
    Inbound Filter: Select an inbound filter from the drop-down list. If an
    inbound filter does not exist, you may create it from Advanced > Inbound
    Filter section.
    Click on the Save button to insert the entry into the Virtual Server list.

    43



  • Page 44

    WL-308 Gaming Router

    Full Manual

    Special Application
    An application rule is used to open single or multiple ports on your router when
    the router senses data sent to the Internet on a trigger port or port range. An
    application rule applies to all computers on your internal network.

    Enable: Place a check in this box to enable the special application rule.
    Name: Assign a meaningful name to the virtual server, for example Web
    Server. Several well-known types of virtual server are available from the
    Application Name drop-down list. Selecting one of these entries fills some of
    the remaining parameters with standard values for that type of server.
    Triggering Ports: Specify the outgoing port range that is used by the
    application.
    Firewall Ports: Specify the port range that you would like to open for
    Internet traffic.
    Schedule: Select a schedule, Always, or Never from the drop-down list. If
    a schedule does not exist, you may create it in the Tools > Schedule section.
    Click on the Save button to insert the entry into the Special Applications list.

    44



  • Page 45

    WL-308 Gaming Router

    Full Manual

    Portort Forwarding
    Multiple connections are required by some applications, such as internet games,
    video conferencing, Internet telephony, and others. These applications have
    difficulties working through NAT (Network Address Translation). This section is
    used to open multiple ports or a range of ports in your router and redirect data
    through those ports to a single PC on your network.

    Enable: Place a check in this box to enable the port forwarding rule.
    Name: Assign a meaningful name to the virtual server, for example Web
    Server. Several well-known types of virtual server are available from the
    Application Name drop-down list. Selecting one of these entries fills some of
    the remaining parameters with standard values for that type of server.
    IP Address: Specify the IP address for the virtual server entry.
    TCP/UDP Ports: Specify the TCP or UDP port numbers.
    Schedule: Select a schedule, Always, or Never from the drop-down list. If
    a schedule does not exist, you may create it in the Tools > Schedule section.
    Inbound Filter: Select an inbound filter from the drop-down list. If an
    inbound filter does not exist, you may create it from Advanced > Inbound
    Filter section.
    Click on the Save button to insert the entry into the Port Forwarding list.

    45



  • Page 46

    WL-308 Gaming Router

    Full Manual

    Access Control
    The Access Control section allows you to control access in and out of devices on
    your network. Use this feature as Parental Controls to only grant access to
    approved sites, limit web access based on time or dates, and/or block access
    from applications such as peer-to-peer utilities or games.
    When Access Control is disabled, every device on the LAN has unrestricted access
    to the Internet. However, if you enable Access Control, Internet access is
    restricted for those devices that have an Access Control Policy configured for
    them. All other devices have unrestricted access to the Internet.

    Place a check in the Enable Access Control check box and then click on the
    Add Policy button. This will bring up the Add New Policy wizard.
    The wireless wizard will inform you that there are six major steps in the
    process.
    o Choose a unique name for your policy
    o Select a schedule
    o Select the machine to which the policy applies
    o Select filtering method
    o Configure web access logging

    Click on the Next button to continue.

    Specify a policy name and then click on the Next button to continue.

    46



  • Page 47

    WL-308 Gaming Router

    Full Manual

    Select a schedule from the drop-down list: Always or Never, or you may
    define a new schedule. Click on the Next button to continue.

    Select a machine to which the policy applies.
    Address Type: Select the IP address or MAC address radio button.
    IP Address: If you selected IP address above, then specify the IP address
    here.
    MAC Address: If you need to change the MAC address of the router's WANside Ethernet interface, either type in an alternate MAC address (for example,
    the MAC address of the router initially connected to the ISP) or click on Clone
    Your PCs MAC Address.
    Click on the OK button to insert the entry into the table.
    Click on the Next button to continue.

    47



  • Page 48

    WL-308 Gaming Router

    Full Manual

    Select a filtering method:
    Log Web Access Only: Select this radio but in order to log web access.
    Block All Access: Select this radio but in order to block all web access.
    Block Some Access: Select this radio but in order to block some web
    access.
    Click on the Apply button to store the changes.

    48



  • Page 49

    WL-308 Gaming Router

    Full Manual

    Website Filter
    This is a type of parental control feature used to restrict certain websites form
    being accessed through your network. These filters can be used for securing and
    restricting your network.

    Website/URL/Domain: Specify the web address that you would like to
    filter. Do not use “http://”
    Click on the Save button to store the changes.

    49



  • Page 50

    WL-308 Gaming Router

    Full Manual

    Schedules
    Click on the Schedules link in the navigation menu. Schedules can be created
    for use with enforcing rules. For example, if you want to restrict web access to
    Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed,
    Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.

    Name: Specify a name for the schedule.
    Day(s): Select the days at which you would like the schedule to be effective.
    All Day – 24 hrs: Place a check in this box if you would like the schedule to
    be active for 24 hours.
    Start Time: If you do not use the 24 hours option, you may specify a start
    time.
    End Time: If you do not use the 24 hours option, you may specify an end
    time.
    Click on the Save button to add this schedule into the list.

    50



  • Page 51

    WL-308 Gaming Router

    Full Manual

    5.4 Advanced Settings
    Dynamic DNS
    The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server,
    etc.) using a domain name that you have purchased with your dynamically
    assigned IP address. Most broadband Internet Service Providers assign dynamic
    (changing) IP addresses. When you use a Dynamic DNS service provider, your
    friends can enter your host name to connect to your server, no matter what your
    IP address is.

    Enable Dynamic DNS: Place a check in this box to enable the DDNS feature.
    Service Address: Select a DDNS service provider from the drop-down list.
    DynDNS is a free service while TZO offers a 30 day free trial.
    Host Name: Specify the website URL.
    User Name: Specify the user name for the DDNS service.
    Password: Specify the password for the DDNS service and verify it once
    again in the next field.
    Timeout: Specify the time between periodic updates to the Dynamic DNS, if
    the dynamic IP address has not changed. The timeout period is entered in
    hours.
    Click on the Apply button once you have modified the settings.

    51



  • Page 52

    WL-308 Gaming Router

    Full Manual

    StreamEngine
    The StreamEngine feature helps improve the network performance by prioritizing
    applications.

    Enable Traffic Shaping: Place a check in the box to enable traffic shaping.
    When this option is enabled, the router restricts the flow of outbound traffic
    so as not to exceed the WAN uplink bandwidth.
    Automatic Uplink Speed. Place a check in this box to enable automatic
    uplink speed. When enabled, this option causes the router to automatically
    measure the useful uplink bandwidth each time the WAN interface is reestablished (after a reboot, for example).
    Measured Uplink Speed: Displays the uplink speed. This is the uplink speed
    measured when the WAN interface was last re-established. The value may be
    lower than that reported by your ISP as it does not include all of the network
    protocol overheads associated with your ISP's network. Typically, this figure
    will be between 87% and 91% of the stated uplink speed for xDSL
    connections and around 5 kbps lower for cable network connections.
    Manual Uplink Speed: Specify an uplink speed or select it from the dropdown list. If Automatic Uplink Speed is disabled, this option allows you to set
    the uplink speed manually. Uplink speed is the speed at which data can be
    transferred from the router to your ISP.
    Connection Type: By default, the router automatically determines whether
    the underlying connection is an xDSL/Frame-relay network or some other
    connection type (such as cable modem or Ethernet), and it displays the result
    as Detected xDSL or Frame Relay Network. If you have an unusual network
    connection in which you are actually connected via xDSL but for which you
    configure either Static or DHCP in the WAN settings, setting this option to
    xDSL or Other Frame Relay Network ensures that the router will recognize
    that it needs to shape traffic slightly differently in order to give the best
    performance. Choosing xDSL or Other Frame Relay Network causes the
    measured uplink speed to be reported slightly lower than before on such
    connections, but gives much better results.

    52



  • Page 53

    WL-308 Gaming Router

    Full Manual

    Click on the Apply button to store these settings.

    Routing
    This section adds a new entry into the routing table.

    Enable: Place a check in this box to enable the routing table entry.
    Name: Specify a name for the rule.
    Destination IP: Specify the destination IP address.
    Netmask: Specify the subnet mask for the IP address.
    Gateway: Specify the IP address of the gateway.
    Metric: Specify the number of routing hops. The route metric is a value from
    1 to 16 that indicates the cost of using this route. A value of 1 is the lowest
    cost, and 15 is the highest cost. A value of 16 indicates that the route is not
    reachable from this router. When trying to reach a particular destination,
    computers on your network will select the best route, ignoring unreachable
    routes.
    Interface: Select the interface from the drop-down list.
    Click on the Save button to insert the entry into the Routing table.

    53



  • Page 54

    WL-308 Gaming Router

    Full Manual

    MAC Address Filter
    This feature is used to restrict certain MAC address from accessing the Internet.
    These filters can be used for securing and restricting your network.

    Configure MAC Filtering: Select one of the options from the drop-down list.
    o Turn MAC Filtering OFF: When "OFF" is selected, MAC addresses are
    not used to control network access.
    o Turn MAC Filtering ON and ALLOW computers listed to access
    the network: When "ALLOW" is selected, only computers with MAC
    addresses listed in the MAC Filtering Rules list are granted network
    access.
    o Turn MAC Filtering ON and DENY computers listed to access the
    network: When "DENY" is selected, any computer with a MAC address
    listed in the MAC Filtering Rules list is refused access to the network.
    MAC Address: Specify that MAC address that you would like to filter.
    Click on the Apply button to store the changes.

    54



  • Page 55

    WL-308 Gaming Router

    Full Manual

    Firewall Settings
    The device provides a tight firewall by virtue of the way NAT works. Unless you
    configure the router to the contrary, the NAT does not respond to unsolicited
    incoming requests on any port, thereby making your LAN invisible to Internet
    cyber attacks. However, some network applications cannot run with a tight
    firewall. Those applications need to selectively open ports in the firewall to
    function correctly. The options on this page control several ways of opening the
    firewall to address the needs of specific types of applications.

    Enable SPI: Place a check in this box to enable SPI. SPI ("stateful packet
    inspection" also known as "dynamic packet filtering") helps to prevent cyber
    attacks by tracking more state per session. It validates that the traffic passing
    through that session conforms to the protocol. When the protocol is TCP, SPI
    checks that packet sequence numbers are within the valid range for the
    session, discarding those packets that do not have valid sequence numbers.
    Whether SPI is enabled or not, the router always tracks TCP connection states
    and ensures that each TCP packet's flags are valid for the current state.
    TCP / UDP NAT Endpoint Filtering options control how the router's NAT
    manages incoming connection requests to ports that are already being used.
    Select one of the radio buttons.
    o End Point Independent Once a LAN-side application has created a
    connection through a specific port, the NAT will forward any incoming
    connection requests with the same port to the LAN-side application
    regardless of their origin. This is the least restrictive option, giving the
    best connectivity and allowing some applications (P2P applications in
    particular) to behave almost as if they are directly connected to the
    Internet.
    o Address Restricted The NAT forwards incoming connection requests
    to a LAN-side host only when they come from the same IP address
    with which a connection was established. This allows the remote

    55



  • Page 56

    WL-308 Gaming Router

    Full Manual

    application to send data back through a port different from the one
    used when the outgoing session was created.
    o Port And Address Restricted The NAT does not forward any
    incoming connection requests with the same port address as an
    already establish connection.
    Note: Some of these options can interact with other port restrictions.
    Endpoint Independent Filtering takes priority over inbound filters or
    schedules, so it is possible for an incoming session request related to an
    outgoing session to enter through a port in spite of an active inbound filter on
    that port. However, packets will be rejected as expected when sent to blocked
    ports (whether blocked by schedule or by inbound filter) for which there are
    no active sessions. Port and Address Restricted Filtering ensures that inbound
    filters and schedules work precisely, but prevents some level of connectivity,
    and therefore might require the use of port triggers, virtual servers, or port
    forwarding to open the ports needed by the application. Address Restricted
    Filtering gives a compromise position, which avoids problems when
    communicating with certain other types of NAT router (symmetric NATs in
    particular) but leaves inbound filters and scheduled access working as
    expected.
    Enable Port Preservation: Place a check in this box to enable Port
    Preservation. NAT Port preservation (on by default) tries to ensure that, when
    a LAN host makes an Internet connection, the same LAN port is also used as
    the Internet visible port. This ensures best compatibility for internet
    communications. Under some circumstances it may be desirable to turn off
    this feature.

    Enable anti-spoof checking: Place a check in this box to enable anti-spoof
    checking. Enabling this option can provide protection from certain kinds of
    "spoofing" attacks. However, enable this option with care. With some
    modems, the WAN connection may be lost when this option is enabled. In
    that case, it may be necessary to change the LAN subnet to something other
    than 192.168.0.x (192.168.2.x, for example), to re-establish the WAN
    connection.
    Enable DMZ Host: Place check in this box to enable DMZ host. DMZ host is a
    demilitarized zone used to provide Internet services without sacrificing
    unauthorized access to its local private network. Typically, the DMZ host
    contains devices accessible to Internet traffic, such as web, FTP, email and
    DNS servers.
    DMZ IP Address: Specify the IP address of the DMZ host.

    56



  • Page 57

    WL-308 Gaming Router

    Full Manual

    Non-UDP/TCP/ICMP LAN Sessions: Place a check in this box to enable
    this feature. When a LAN application that uses a protocol other than UDP,
    TCP, or ICMP initiates a session to the Internet, the router's NAT can track
    such a session, even though it does not recognize the protocol. This feature is
    useful because it enables certain applications (most importantly a single VPN
    connection to a remote host) without the need for an ALG.
    Note: This feature does not apply to the DMZ host (if one is enabled). The
    DMZ host always handles these kinds of sessions.

    Enabling this option (the default setting) enables single VPN connections to a
    remote host. (But, for multiple VPN connections, the appropriate VPN ALG
    must be used.) Disabling this option, however, only disables VPN if the
    appropriate VPN ALG is also disabled.

    Application Layer Gateway (ALG) Configuration: Place a check in
    appropriate feature boxes to enable them. . Some protocols and applications
    require special handling of the IP payload to make them work with network
    address translation (NAT). Each ALG provides special handling for a specific
    protocol or application. A number of ALGs for common applications are
    enabled by default.
    o PPTP: Allows multiple machines on the LAN to connect to their
    corporate networks using PPTP protocol. When the PPTP ALG is
    enabled, LAN computers can establish PPTP VPN connections either
    with the same or with different VPN servers. When the PPTP ALG is
    disabled, the router allows VPN operation in a restricted way -- LAN
    computers are typically able to establish VPN tunnels to different VPN
    Internet servers but not to the same server. The advantage of
    disabling the PPTP ALG is to increase VPN performance. Enabling the
    PPTP ALG also allows incoming VPN connections to a LAN side VPN
    server (refer to Advanced → Virtual Server).

    57



  • Page 58

    WL-308 Gaming Router

    o

    o

    o

    o
    o
    o

    o

    o

    Full Manual

    IPSec: (VPN) Allows multiple VPN clients to connect to their corporate
    networks using IPSec. Some VPN clients support traversal of IPSec
    through NAT. This option may interfere with the operation of such VPN
    clients. If you are having trouble connecting with your corporate
    network, try disabling this option. Check with the system administrator
    of your corporate network whether your VPN client supports NAT
    traversal.
    RTSP: Allows applications that use Real Time Streaming Protocol to
    receive streaming media from the internet. QuickTime and Real Player
    are some of the common applications using this protocol.
    Windows/MSN Messenger: Supports use on LAN computers of
    Microsoft Windows Messenger (the Internet messaging client that ships
    with Microsoft Windows) and MSN Messenger. The SIP ALG must also
    be enabled when the Windows Messenger ALG is enabled.
    FTP: Allows FTP clients and servers to transfer data across NAT.
    H.323
    (Netmeeting):
    Allows
    H.323
    (specifically
    Microsoft
    Netmeeting) clients to communicate across NAT server.
    SIP: Allows devices and applications using VoIP (Voice over IP) to
    communicate across NAT. Some VoIP applications and devices have
    the ability to discover NAT devices and work around them. This ALG
    may interfere with the operation of such devices. If you are having
    trouble making VoIP calls, try turning this ALG off.
    Wake-On-LAN: This feature enables forwarding of "magic packets"
    (that is, specially formatted wake-up packets) from the WAN to a LAN
    computer or other device that is "Wake on LAN" (WOL) capable.
    MMS: Allows Windows Media Player, using MMS protocol, to receive
    streaming media from the internet.

    Click on the Apply button to store these settings.

    58



  • Page 59

    WL-308 Gaming Router

    Full Manual

    WISH
    WISH is short for Wireless Intelligent Stream Handling, a technology developed
    to enhance your experience of using a wireless network by prioritizing the traffic
    of different applications.

    Enable WISH: Place a check in this box to enable the WISH feature.
    HTTP: Place a check in this box to add HTTP as a classifier. This allows the
    device to recognize HTTP transfers for many common audio and video
    streams and prioritize them above other traffic. Such streams are frequently
    used by digital media players.
    Windows Media Center: Place a check in this box to add HTTP as a
    classifier. This enables the router to recognize certain audio and video
    streams generated by a Windows Media Center PC and to prioritize these
    above other traffic. Such streams are used by systems known as Windows
    Media Extenders, such as the Xbox 360.
    Automatic: Place a check in this box for the device to automatically
    configure the classifiers. When enabled, this option causes the router to
    automatically attempt to prioritize traffic streams that it doesn't otherwise
    recognize, based on the behavior that the streams exhibit. This acts to
    deprioritize streams that exhibit bulk transfer characteristics, such as file
    transfers, while leaving interactive traffic, such as gaming or VoIP, running at
    a normal priority.

    59



  • Page 60

    WL-308 Gaming Router

    Full Manual

    Enable: Place a check in this box to enable the WISH rule. A WISH Rule
    identifies a specific message flow and assigns a priority to that flow. For most
    applications, the priority classifiers ensure the right priorities and specific
    WISH Rules are not required. WISH supports overlaps between rules. If more
    than one rule matches for a specific message flow, the rule with the highest
    priority will be used.
    Name: Assign a meaningful name to the WISH rule.
    Priority: Select a priority from the drop-down list. The four priority message
    flows are:
    o BK: Background (least urgent).
    o BE: Best Effort.
    o VI: Video.
    o VO: Voice (most urgent).
    Protocol: Select a protocol from the drop-down list.
    Host 1 IP Range: Specify the IP range for the rule.
    Host 1 Port Range: Specify the port range for the rule.
    Host 2 IP Range: Specify the IP range for the rule.
    Host 2 Port Range: Specify the port range for the rule.
    Click on the Apply button to insert the entry into the WISH rules list.

    60



  • Page 61

    WL-308 Gaming Router

    Full Manual

    Inbound Filter
    When you use the Virtual Server, Port Forwarding, or Remote Administration
    features to open specific ports to traffic from the Internet, you could be
    increasing the exposure of your LAN to cyber attacks from the Internet. In these
    cases, you can use Inbound Filters to limit that exposure by specifying the IP
    addresses of internet hosts that you trust to access your LAN through the ports
    that you have opened.
    Inbound Filters can be used for limiting access to a server on your network to a
    system or group of systems. Filter rules can be used with Virtual Server, Gaming,
    or Remote Administration features.

    Name Specify a name for the inbound filter.
    Action: Select Allow or Deny from the drop-down list. This will apply the
    inbound filter rule on the WAN interface.
    Remote IP Range: Specify the remote IP address range and then click in the
    check box to enable the range.
    Click on the Save button to store the changes.

    61



  • Page 62

    WL-308 Gaming Router

    Full Manual

    5.5 Toolbox
    Time Configuration
    Click on the Time link in the navigation menu. This feature allows you to
    configure, update, and maintain the correct time on the device’s internal system
    clock as well as configure the time zone. The date and time of the device can be
    configured manually or by synchronizing with a time server.
    Note: If the device loses power for any reason, it will not be able to keep its
    clock running, and will not display the correct time once the device has been
    restarted. Therefore, you must re-enter the correct date and time.

    Current Router Time: Displays the current time on the device.
    Time Zone: Select your time zone from the drop-down list.
    Enable Daylight Saving: Place a check in this box to enable daylight
    savings time.
    Daylight Saving Offset: Select the offset from the drop-down list.
    Daylight Saving Date: Select the daylight savings date from the drop-down
    list. Select the starting and ending times for the change to and from daylight
    saving time. For example, suppose for DST Start you select Month="Oct",
    Week="3rd", Day="Sun" and Time="2am". This is the same as saying:
    "Daylight saving starts on the third Sunday of October at 2:00 AM."
    Enable NTP Server: Place a check in this box if you would like to
    synchronize the device’s clock to a Network Time Server over the Internet. If
    you are using schedules or logs, this is the best way to ensure that the
    schedules and logs are kept accurate.
    NTP Server Used: Specify the NTP server or select one from the drop-down
    list.
    62



  • Page 63

    WL-308 Gaming Router

    Full Manual

    Set the Date and Time: Select a date and time from the drop-down list or
    do to use computer’s time and date click on the Copy Your Computer’s
    Time Settings button.
    Click on the Apply button once you have modified the settings.

    System Settings
    Click on the System link in the navigation menu. This page allows you to reboot
    the device using the current settings or restore all the settings to the factory
    defaults.

    Save To Local Hard Drive
    This option allows you to save the current configuration of the device into a file.
    Click on the Save Configuration button to begin.
    Save the file on your local disk by using the Save or Save to Disk button in the
    dialog box.

    Load From Local Hard Drive

    63



  • Page 64

    WL-308 Gaming Router

    Full Manual

    This option allows you to restore a backup configuration from a file to the device.
    Click on the Browse button to select the file and then click on Restore
    Configuration from a File button.
    The system then prompts you to reboot the device.

    Click on the OK button to continue. You will then see the Rebooting page.

    Please wait while the system is rebooting.
    Note: Do no un-plug the device during this process as this may cause permanent
    damage.

    Restore To Factory Default
    Click on the Restore all Settings to Factory Defaults button. This option
    restores al configuration settings back to the settings that were in effect at the
    time when the device was shipped from the factory.

    Once the dialog box appears, click on the OK button to confirm the action.
    Note: The current settings will be lost.
    Click on the OK button to continue. You will then see the Rebooting page.

    64



  • Page 65

    WL-308 Gaming Router

    Full Manual

    Please wait while the system is rebooting.
    Note: Do no un-plug the device during this process as this may cause permanent
    damage.

    Reboot The Device
    Click on the Reboot the Device button to reboot the device using its current
    settings. Once the dialog box appears, click on the OK button to confirm the
    action.

    Once the dialog box appears, click on the OK button to confirm the action.
    Note: The current settings will be lost.
    Click on the OK button to continue. You will then see the Rebooting page.

    Please wait while the system is rebooting.
    Note: Do no un-plug the device during this process as this may cause permanent
    damage.

    65



  • Page 66

    WL-308 Gaming Router

    Full Manual

    Firmware
    Click on the Firmware link in the navigation menu. This page allows you to
    upgrade the firmware of the device in order to improve the functionality and
    performance. This page also displays the current firmware version and its release
    date.

    Ensure that you have downloaded the appropriate firmware from the vendor’s
    website. Connect the device to your PC using an Ethernet cable, as the firmware
    cannot be upgraded using the wireless interface.
    Click on the Browse button to select the firmware and then click on the Upload
    button.

    Syslog
    Logs display a list of events that are triggered on the Ethernet and Wireless
    interface. This log can be referred when an unknown error occurs on the system
    or when a report needs to be sent to the technical support department for
    debugging purposes

    66



  • Page 67

    WL-308 Gaming Router

    Full Manual

    Enable Logging to a Syslog Server: Place a check in this box to enable
    Syslog logging.
    Syslog Server IP Address: Specify the IP address of the Syslog server.
    Click on the Apply button once you have modified the settings.

    Administrator Settings
    Admin Password
    You can change the password required to log into the broadband router's system
    web-based management. By default, the password is: “admin”. Passwords can
    contain 0 to 12 alphanumeric characters, and are case sensitive.

    Username: Fill in the current username (default: admin).
    Password: Enter your new password.
    Verify Password: Enter your new password again for verification purposes.

    67



  • Page 68

    WL-308 Gaming Router

    Full Manual

    System Name

    Gateway Name: Name of your router.

    Remote Management
    The remote management function allows you to configure the Broadband router
    from a remote site.

    Inactivity Time Out: Time after which you will be automatically logged out of
    the web-interface.
    Enable Remote Management: Select “Enabled” to enable the remote
    management function.
    Remote Admin Port: The port number of the remote management web
    interface.
    Click Apply at the top of the screen to save the above configurations.

    68



  • Page 69

    WL-308 Gaming Router

    Full Manual

    Appendix A – Specifications
    Hardware Summary
    Physical
    Interface

    WAN: One 10/100/1000 Gigabit RJ-45
    LAN: Four 10/100/1000 Gigabit RJ-45
    Reset Button (1 second for Reboot, 5 second for
    Reset to Factory Default )
    Power Jack
    JTAG (for debug only)

    LED Status

    Power/ Status
    WAN (Internet connection)
    LAN1~LAN4 (10/100/1000Mbps)
    WLAN (Wireless Connection)

    Power
    Requirements

    Power Supply: 90 to 240 VDC ± 10% (depends on
    different countries)
    Device: 12 V/ 1.25A

    Radio Specifications
    Frequency Band

    2.400~2.484 GHz

    Media Access
    Protocol

    Carrier sense multiple access with collision avoidance
    (CSMA/CA)

    Modulation
    Technology

    OFDM: BPSK, QPSK, 16-QAM, 64-QAM
    DBPSK, DQPSK, CCK

    Operating
    Channels

    11 for North America, 14 for Japan, 13 for Europe

    Receive
    Sensitivity
    (Typical)

    -93dBm @ 1Mbps

    2.412~2.472G(IEEE802.11b) (1Rx)
    -91dBm @ 11Mbps
    2.412~2.472G(IEEE802.11g) (2Rx)
    -92dBm @ 6Mbps
    -79dBm @ 54Mbps
    2.412~2.472G(IEEE802.11N) (2Rx)
    -90 dBm MCS 8
    -70 dBm MCS 15

    Available transmit
    power

    2.412~2.472G(IEEE802.11b)
    19dBm @1~11Mbps
    2.412~2.472G(IEEE802.11g)

    69



  • Page 70

    WL-308 Gaming Router

    Full Manual

    19 dBm @6Mbps
    16 dBm @54Mbps
    2.412~2.472G(IEEE802.11N)
    20 dBm MCS 8
    16 dBm MCS 15
    Antenna Gain

    Peak Gain = 2 dBi
    Average Gain = 1.08 dBi (@ 2.45GHz, H-Plan)

    Router and Gateway
    Topology

    Infrastructure

    Operation Mode

    AP/ Router/ WDS Bridge

    LAN

    DHCP Server
    Static IP
    DNS
    UPnP

    WAN

    Static IP
    DHCP Client
    PPPoE
    PPTP
    Clone MAC
    DNS Relay
    DDNS-8 Verified Services

    Router

    NAT/ NAPT
    Static Routing- RIPv2
    Dynamic Route
    Virtual server mapping
    IP address mapping
    Port Forwarding
    Port Triggering
    MAC address Filtering
    ALG(Application Layer Gateway) support
    (RTP/RTSP, AOL, FTP, ICMP, WMP/MMS,
    NetMeeting, SIP)

    Firewall

    Blocking Ping
    ICMP Blocking

    70



  • Page 71

    WL-308 Gaming Router

    Full Manual

    SPI (Stateful Packet Inspection)
    Rule Based (IP Address Ranges, Port Ranges &
    Schedule)
    DMZ (Demilitarized Zone) Host
    Policy Based Parental Controls
    o

    Time Based Internet Access

    o

    Port Range / Service Filtering

    o

    Internet Domain Restriction

    o

    Dynamic URL Filtering (OEM
    subscription service)

    VPN
    Wireless

    VPN pass-through (PPTP, L2TP, IPSEC)
    64/128 bit WEP Encryption
    WPA Personal (WPA-PSK using TKIP or AES)
    WPA Enterprise (WPA-EAP using TKIP)
    802.1x Authenticator
    Hide SSID in beacons
    Wi-Fi Protection Setup (WPS)
    Auto Channel Selection

    QoS

    WMM
    Intelligent Stream Handling/Wireless Intelligent
    Stream Handling
    o

    Automatic Traffic Classification &
    Prioritization

    o

    Dynamic Traffic Shaping & Packet
    Fragmentation

    o

    Automatic Configuration

    Management
    Configuration

    Web-based configuration (HTTP)

    Firmware Upgrade

    Upgrade firmware via web-browser

    Administrator
    Setting

    Administrator password change

    Reset Setting

    Reboot

    System

    Idle time out

    Reset to Factory Default
    Status and Statistics, Time Zone & NTP Client, Event
    71



  • Page 72

    WL-308 Gaming Router

    monitoring

    Full Manual

    Log, Email Alarm

    Environment & Physical
    Temperature
    Range

    0 to 50° C (32 °F to 122 °F) - Operating
    -40 to 70 ° C(-40 °F to158 °F) - Storage

    Humidity (noncondensing)

    15%~95% typical

    Dimensions

    167mm (L) x 108mm (W) x 25mm (H)

    Weight

    295g

    72



  • Page 73

    WL-308 Gaming Router

    Full Manual

    Appendix B FCC Interference
    Statement
    Federal Communication Commission Interference
    Statement
    This equipment has been tested and found to comply with the limits for a Class B
    digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
    provide reasonable protection against harmful interference in a residential
    installation. This equipment generates uses and can radiate radio frequency
    energy and, if not installed and used in accordance with the instructions, may
    cause harmful interference to radio communications. However, there is no
    guarantee that interference will not occur in a particular installation. If this
    equipment does cause harmful interference to radio or television reception, which
    can be determined by turning the equipment off and on, the user is encouraged
    to try to correct the interference by one of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to
    which the receiver is connected.
    Consult the dealer or an experienced radio/TV technician for help.
    FCC Caution: Any changes or modifications not expressly approved by the party
    responsible for compliance could void the user's authority to operate this
    equipment.
    This device complies with Part 15 of the FCC Rules. Operation is subject to the
    following two conditions: (1) This device may not cause harmful interference, and
    (2) this device must accept any interference received, including interference that
    may cause undesired operation.

    IMPORTANT NOTE:
    FCC Radiation Exposure Statement:
    This equipment complies with FCC radiation exposure limits set forth for an
    uncontrolled environment.
    This device complies with FCC RF Exposure limits set forth for an uncontrolled
    environment, under 47 CFR 2.1093 paragraph (d)(2).
    This transmitter must not be co-located or operating in conjunction with any
    other antenna or transmitter.

    73






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sitecom WL-308 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Sitecom WL-308 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 4,84 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info