Bedienungsanleitung Skil 0755 (Seite 9 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

480091

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

• Do not use charger when cord or plug is damaged; cord

or plug should be replaced immediately at one of the

ocially registered SKIL Service Stations

• Do not disassemble charger or tool

EXPLANATION OF SYMBOLS ON TOOL/CHARGER

3 Read the instruction manual before use

4 Do not expose tool/charger to rain

5 ! After switching o the tool the blade continues

to move for a few seconds

6 

 (keep bystanders a safe distance away from work

area)

7 Only use the charger indoors

8 Double insulation (no earth wire required)

9 Automatic shut-o when charger gets too hot (thermic

fuse blows and charger becomes useless)

0 Incorrect polarity of the charger connection could cause a

hazard (only charge the battery with the charger supplied)

! Do not dispose of the charger together with household

waste material

@ Do not dispose of the battery together with household

waste material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• If for any reason the old plug is cut o the cord of the

charger, it must be disposed of safely and not left

unattended

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of the charger to the earth terminal of the plug



• Charging battery #

- battery of new tools is not fully charged

 





IMPORTANT:

- while charging, the charger and the battery may

become warm to touch; this is normal and does not

indicate a problem

 







- connect charger B with both wall socket and contact C

- charging light D turns on indicating that the tool is

being charged

- when the battery is fully charged, charging light D

turns o (after 4-6 hours)

- the lithium-ion battery can be charged at any time

(interrupting the charging procedure does not damage

the battery)

- the lithium-ion battery does not have to be empty

before charging (no “memory-eect” as with

nickel-cadmium batteries)

- if you anticipate long periods of non-use for the tool, it

is best to unplug the charger from its power source

• Battery protection

Switches o the tool automatically when

1) the battery temperature is not within the allowable

operating temperature range of -10 to +60°C

2) the lithium-ion battery is nearly empty (to protect

against deep discharge)

 





• On/o safety switch $

Prevents the tool from being switched on accidentally

- switch on tool by rst pressing safety switch E 2 and

then pulling trigger switch F 2

- switch o tool by releasing trigger switch F

- move tool away from cutting area before switching o

 



• Changing blades %

 

- turn tool upside down

- push release button G

- slide protective cover H in same direction as arrow

printed on cover and lift it from the housing

 





- lift blade J or K out and mount required blade as

illustrated

- position protective cover H back and slide it towards

the blade until it snaplocks

• Holding and guiding the tool

 

^

- maintain a stable working position

- keep your other hand away from the cutting blades

• Trimming hedges &

- trim the sides of the hedge rst (from the bottom

upwards), then cut the top

- trim the side of a hedge in such a way that it will be

slightly narrower at the top

- use a hand saw or pruning shears to cut thicker

branches

- shrub shear blade K as well as grass shear blade J

can be used for trimming hedges

• Trimming grass and shrubs *

- when cutting long grass, work in stages from the top

and take small cuts

- for optimal cutting results, only cut dry grass

- keep the tool away from solid objects in order to

protect the cutting blades against excessive wear

- grass shear blade J can also be used for trimming

shrubs



• For trimming a hedge at a uniform height level

- fasten a piece of string along the length of the hedge

at the desired height

- trim the hedge just above this string

• Recommended cutting/trimming times (Western Europe)

- trim hedges with deciduous leaves in June and

October

- trim evergreen hedges in April and August

- trim conifers and other fast-growing shrubs every 6

weeks from May until October

Skil 0755 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info