Bedienungsanleitung Skil 0796 (Seite 12 von 104) (Alle Sprachen)

701724

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always switch o tool, disconnect plug from power

source, and ensure that all moving parts have come to a

complete standstill

• Always keep tool and cord clean (especially ventilation

slots L 2)

- clean the tool after each use with a soft brush or a

cloth (do not use cleaning agents or solvents)

- remove the collection bag after each use, turn it

inside out and brush it thoroughly

- after removing the collection bag, ensure that possible

dirt residues are removed from the released air outlet

area

• Storage &

- securely mount storage rail S on the wall with 4 screws

(not supplied) and horizontally leveled

- store the tool indoors in a dry and locked-up place,

out of reach of children

- do not cover the tool with plastic (plastic may cause

moisture with rust/corrosion as a result)

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

TROUBLESHOOTING

• The following listing shows problem symptoms, possible

causes and corrective actions (if these do not identify

and correct the problem, contact your dealer or service

station)

! switch off the tool and disconnect the plug before

investigating the problem

★ Tool does not operate

- no power supply -> check power supply (power cable,

circuit breakers, fuses)

- plug not connected -> connect plug

- extension cord damaged -> replace extension cord

- on/o switch defective -> contact dealer/service

station

- worn carbon brushes -> contact dealer/service

station

- defective motor -> contact dealer/service station

- blowing/vacuum tube not completely mounted ->

mount two-part blowing/vacuum tube

★ Tool operates intermittently

- on/o switch defective -> contact dealer/service

station

- internal wiring defective -> contact dealer/service

station

- impeller blocked by foreign object -> remove blockage

★ No/low blowing power

- selector switch in vacuuming mode -> set selector

switch in blowing mode

★ No/low vacuuming power

- selector switch in blowing mode -> set selector switch

in vacuuming mode

- collection bag is full/dirty -> empty/clean collection

bag

- vacuuming opening clogged up or blocked by foreign

object -> remove blockage

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol 9 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 60335 the sound

pressure level of this tool is 80 dB(A) and the sound

power level 100 dB(A) (standard deviation: 3 dB), and the

vibration 2.8 m/s² (triax vector sum; uncertainty K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60335; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns



Aspirateur-souffleur de

jardin 0792/0796

INTRODUCTION

• Cet outil a été conçu pour souer/rassembler et aspirer/

broyer les feuilles sèches et autres déchets secs de

jardinage, notamment l’herbe et les branches

• Cet outil est uniquement destiné à un usage domestique

et n’est pas conçu pour être utilisé dans des lieux

humides

• Cet outil n’est conçu pour un usage professionnel

• Vériez que le conditionnement contient toutes les

pièces présentées dans le schéma 2

• Lorsque des pièces manquent ou sont endommagées,

veuillez contacter votre distributeur

• Lisez attentivement ce manuel d’instruction avant

d’utiliser l’outil et conservez-le pour pouvoir vous y

référer ultérieurement 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0796 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info