Bedienungsanleitung Skil 1900 (Seite 7 von 116) (Alle Sprachen)

758622

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

! the laser beam is automatically

activated when the tool is turned

-press main button B briey to turn

on/o the laser beam

! 

the tool will automatically turn



-press and hold main button B to turn

o the tool

• Projecting on walls

-mark the point where the laser line

should be projected

-place the wall mount base H with

the marked point centered in the

viewing window K

-mounting options:

1) use adhesive putty (included) on

surfaces L 7a or use tape (not

included) to mount base on dry and

clean surfaces 7b

-the adhesive putty may used

repeatedly

-to keep good adhesion, wash the

putty frequently and store it in the

adhesive putty storage S

-remove the wall-mount base from

the wall slowly after using, any

residue of the adhesive putty on the

wall can be cleaned by rolling the

adhesive putty over the residue

2) use pins (not included) through

pin holes N to mount base on soft

materials (plasterboard, soft wood)

! be aware of sharp pins

3) use a screw or nail (not included)

through viewing window / screw

hole K to mount base 7d

4) use the magnet in base to mount it

on ferrous metals 7e

-attach tool to wall mount base

! ensure that clip ring J clips into

slot G on bottom of the tool

-rotate tool freely to the desired

angle 8

• Projecting on oors

-when projecting a laser line on the

oor the digital angle indictation

shows ---

-use the protractor M to adjust the

laser line to any angle

-attach the wall mount base H to the

protractor M as illustrated 9

-attach tool to wall mount base

unintentionally blind other persons or

themselves)

• Do not operate the measuring tool

in explosive environments, such



liquids, gases or dusts (sparks can

be created in the measuring tool which

may ignite the dust or fumes)

• Keep the measuring tool away from

cardiac pacemakers (the magnet

inside the measuring tool generates

a eld that can impair the function of

cardiac pacemakers)

• Keep the measuring tool away

from magnetic data media and

magnetically-sensitive equipment

(the eect of the magnet can lead to

irreversible data loss)

EXPLANATION OF SYMBOLS ON

TOOL

2 Read the instruction manual before

use

3 Do not dispose of electric tools and

batteries together with household

waste material

4 Laser radiation / Do not stare into

beam / Class 2 laser product

USE

• Inserting/replacing the batteries 5

-alkali-manganese batteries are

recommended for the measuring

tool

-do not use rechargeable batteries

-remove cover A

-insert 2 x AAA batteries (pay

attention to correct polarisation)

-always replace all batteries at the

same time

-only use batteries from one brand

and with the identical capacity

-mount cover A

-remove the batteries from the

measuring tool when not using

it for extended periods (when

storing for extended periods,

the batteries can corrode and

self-discharge)

• Battery level indicator 6

-during use the battery level indicator

on the display indicates the

remaining battery capacity

• On/o

-press and hold main button B to turn

on the tool

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1900 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info