Bedienungsanleitung Skil 1900 (Seite 8 von 116) (Alle Sprachen)

758622

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

MAINTENANCE / SERVICE

• This tool is not intended for

professional use

• Protect the measuring tool against

moisture and direct sun light

• Do not subject the measuring

tool to extreme temperatures or

variations in temperature (the

accuracy of the measuring tool can

be impaired)

-as an example, do not leave it in

vehicles for long time

-allow the measuring tool to adjust

to the ambient temperature before

putting it into operation

• Avoid heavy impact to or falling

down of the measuring tool

-damage to the measuring tool can

impair its accuracy

• Keep the measuring tool clean at all

times

• Do not immerse the measuring tool in

water or other uids

• Wipe o debris using a moist and

soft cloth

• Do not use any cleaning agents or

solvents

• Regularly clean the surfaces at the exit

opening of the laser in particular, and

pay attention to any u of bres

• If the tool should fail despite the care

taken in manufacturing and testing

procedures, repair should be carried

out by an after-sales service centre for

SKIL power tools

-send the tool undismantled

together with proof of purchase to

your dealer or the nearest SKIL

service station (addresses as well

as the service diagram of the tool

are listed on www.skil.com)

• Be aware that damage due to overload

or improper handling of the tool will

be excluded from the warranty (for

the SKIL warranty conditions see

www.skil.com or ask your dealer)

ENVIRONMENT

• Do not dispose of electric

tools, batteries, accessories

and packaging together with

household waste material (only for

EU countries)

-in observance of European Directive

-position the protractor to a corner or

an edge q

-mounting options 7a, 7b, 7c, or

7d (with screw holes P) can also

be used for setting the protractor on

oors or ceiling

-turn on the tool

-rotate the tool to the desired angle

• Digital levelling

-with the laser beam turned o, the

tool can be used as digital level

-place the tool with the angle

measurement base F on the surface

to be measured w

-alternatively, use magnetic edge E

to attach the tool to a ferrous surface

-the display shows the angle

between the surface and absolute

level

! if the display shows --- the tool is

inclined to forward or backward

too much and the measurement

cannot be made

-to level or plumb the working

surface, move the surface until the

display shows 0º or 90º

-if the deviation is within ±10º of

0° and 90°, ne-tuning arrows are

shown which vary in direction and

height relative to the target e

APPLICATION ADVICE

• Always use the centre of the laser

line for marking (the width of the

laser line changes with the distance)

• Laser viewing glasses 1 (not

standard included)

-laser viewing glasses R 1 lter out

the ambient light

-this makes the light of the laser

appear brighter for the eyes

-do not use the laser viewing

glasses as safety goggles (the

laser viewing glasses are used

for improved visualisation of the

laser beam, but they do not protect

against laser radiation)

-do not use the laser viewing

glasses as sun glasses or in

 (the laser viewing glasses do

not aord complete UV protection

and reduce colour perception)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1900 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info