Bedienungsanleitung Skil 2148 (Seite 4 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

479914

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Cordless screwdriver 2148

INTRODUCTION

• This tool with left/right rotation is

intended for screwdriving in wood

• Read and save this instruction

manual 3

TECHNICAL SPECIFICATIONS 1

Max. torque for hard screwdriving

application according to ISO 5393: 7 Nm

TOOL ELEMENTS 2

A Switch for on/off

B Switch for changing direction of

rotation

C Bitholder

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for

future reference. The term “power tool”

in the warnings refers to your mains-

operated (corded) power tool or battery-

operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite

accidents.

b) Do not operate power tools in

explosive atmospheres, such as in

the presence of flammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away

while operating a power tool.

Distractions can cause you to lose

control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with earthed (grounded) power

tools. Unmodiﬁ ed plugs and matching

outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or

grounded.

c) Do not expose power tools to rain

or wet conditions. Water entering a

power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool.

Keep cord away from heat, oil,

sharp edges or moving parts.

Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use an

earth leakage circuit breaker. Use of

an earth leakage circuit breaker

reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing

and use common sense when

operating a power tool. Do not use

a power tool while you are tired or

under the influence of drugs,

alcohol or medication. A moment of

inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection.

Protective equipment such as dust

mask, non-skid safety shoes, hard hat,

or hearing protection used for

appropriate conditions will reduce

personal injuries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 2148 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info