Bedienungsanleitung Skil 2330 (Seite 7 von 128) (Alle Sprachen)

591176

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

 Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

 Follow the dust-related national requirements for the

materials you want to work with

 The tool/charger is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the tool/charger by a

person responsible for their safety

 Ensure that children do not play with the tool/charger

 Ensure that switch E

is in the middle (locking)

position before making any adjustments or changing

accessories as well as when carrying or storing the tool

ACCESSORIES

 Only use SKIL charger 2610Z06565 (U.K. 2610Z06567)

with this tool

 SKIL can assure awless functioning of the tool only

when original accessories are used

 Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

BEFORE USE

 Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the charger

 Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

 Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

DURING USE

 Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory or fastener may contact hidden wiring

(cutting accessory and fasteners contacting a "live" wire

may make exposed metal parts of the power tool "live"

and could give the operator an electric shock)

 In case of electrical or mechanical malfunction,

immediately switch o the tool or unplug charger from

power source

CHARGING/BATTERIES

 Charge battery only with the charger that is supplied

with the tool

 Do not expose tool/charger to rain

 Do not charge battery in damp or wet environments

 Do not use charger when damaged; take it to one of the

ocially registered SKIL Service Stations for a safety

check

 Do not use charger when cord or plug is damaged; cord

or plug should be replaced immediately at one of the

ocially registered SKIL Service Stations

 Do not disassemble charger or tool

 Permitted ambient temperature (tool/charger/battery):

- when charging 0...+45°C

- during operation –20...+50°C

- during storage –20...+50°C

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any



operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

dierent from those intended could result in a hazardous

situation.

5) BATTERY TOOL USE AND CARE

a) 

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

b) 

battery packs. Use of any other battery packs may

create a risk of injury and re.

c) When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact



contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

6) SERVICE

a) 

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR CORDLESS DRILL/

DRIVERS

PERSONAL SAFETY

 Do not work materials containing asbestos

(asbestos is considered carcinogenic)

 Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

Skil 2330 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info