Bedienungsanleitung Skil 3335-01 (Seite 4 von 52) (Englisch, Französisch, Spanisch)

758357

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Additional Safety Rules

c. Never turn your Scroll Saw on before clearing the

table of all objects (tools, scraps of wood, etc.) except

for the workpiece and related feed or support devices

for the operation planned.

d. Avoid awkward hand positions where a sudden slip

could cause a hand to move into the blade.

•ALWAYS adjust the drop foot to just clear the work-

piece to protect the operator, keep blade breakage

to a minimum and provide maximum support for

blade.

• Always adjust blade tension correctly.

•The Scroll Saw should cut on the down stroke.

Always make sure blade teeth are oriented down-

ward toward table.

•When cutting a large piece of material, make sure

it is supported at table height.

• Hold the work firmly against the table.

• Do not feed the material too fast while cutting. Only

feed the material fast enough so that the blade will

cut. Keep fingers away from the blade.

• Use caution when cutting off material which is irreg-

ular in cross section‚ it could pinch the blade before

the cut is completed. A piece of molding, for exam-

ple, must lay flat on the table and not be permitted

to rock while being cut.

• Use caution when cutting off round material such

as dowel rods or tubing. They have a tendency to

roll while being cut, causing the blade to “bite”.

e. Never leave the Scroll Saw running unattended.

Turn the saw OFF, make sure the saw has come to a

complete stop, and then remove plug from power sup-

ply before leaving the work area.

f. Do not perform layout, assembly or setup work on

the table while the cutting tool is operating.

g. Turn saw OFF and remove plug from power supply

outlet before installing or removing an accessory or

attachment.

h.Access Door must be closed before operation.

i. Quick Release Tension Lever should be in down

position before operating.

11. THINK SAFETY

SAFETY IS A COMBINATION OF

OPERATOR COMMON SENSE AND ALERTNESS

ATALL TIMES WHEN THE SCROLL SAW IS BEING

USED.

Do not allow familiarity (gained from frequent use of

your Scroll Saw) to become commonplace. Always

remember that a careless fraction of a second is suf-

ficient to inflict severe injury.

The operation of any power tool

can result in foreign objects being

thrown into the eyes, which can

result in severe eye damage.

Always wear safety goggles that

comply with ANSI Z87.1 before

commencing power tool operation.

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known

to cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

•Lead from lead-based paints,

• Crystalline silica from bricks and cement and other

masonry products, and

•Arsenic and chromium from chemically treated lum-

ber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to filter

out microscopic particles.

WARNING

NOTE AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS THAT APPEAR

ON OF THE SCROLL SAW HOUSING:

WARNING

SM 2610957121 05-08 6/5/08 7:35 AM Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 3335-01 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info