Bedienungsanleitung Skil 9782 (Seite 7 von 176) (Alle Sprachen)

591207

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

d) Storeidlepowertoolsoutofthereachofchildren

anddonotallowpersonsunfamiliarwiththepower

toolortheseinstructionstooperatethepowertool.

Power tools are dangerous in the hands of untrained

users.

e) Maintainpowertools.Checkformisalignmentor

bindingofmovingparts,breakageofpartsandany

otherconditionthatmayaffectthepowertool’s

operation.Ifdamaged,havethepowertoolrepaired

beforeuse. Many accidents are caused by poorly

maintained power tools.

f) Keepcuttingtoolssharpandclean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Usethepowertool,accessoriesandtoolbitsetc.,in

accordancewiththeseinstructions,takinginto

accounttheworkingconditionsandtheworktobe

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

5)SERVICE

a) Haveyourpowertoolservicedbyaqualifiedrepair

personusingonlyidenticalreplacementparts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR ANGLE GRINDERS

1)SAFETYINSTRUCTIONSFORALLOPERATIONS

a) Thispowertoolisintendedtofunctionasagrinder,

sander,wirebrushorcut-offtool.Readallsafety

warnings,instructions,illustrationsand

specificationsprovidedwiththispowertool.Failure

to follow all instructions listed below may result in electric

shock, re and/or serious injury.

b) Operationssuchaspolishingarenotrecommended

tobeperformedwiththispowertool. Operations for

which the power tool was not designed may create a

hazard and cause personal injury.

c) Donotuseaccessorieswhicharenotspecifically

designedandrecommendedbythetool

manufacturer.Just because the accessory can be

attached to your power tool, it does not assure safe

operation.

d) Theratedspeedoftheaccessorymustbeatleast

equaltothemaximumspeedmarkedonthepower

tool.Accessories running faster than their rated speed

can y apart.

e) Theoutsidediameterandthethicknessofyour

accessorymustbewithinthecapacityratingofyour

powertool.Incorrectly sized accessories cannot be

adequately guarded or controlled.

f) Threadedmountingofaccessoriesmustmatchthe

grinderspindlethread.Foraccessoriesmountedby

flanges,thearbourholeoftheaccessorymustfit

thelocatingdiameteroftheflange. Accessories that

do not match the mounting hardware of the power tool

will run out of balance, vibrate excessively and may

cause loss of control.

g) Donotuseadamagedaccessory.Beforeeachuse

inspecttheaccessorysuchasabrasivewheelsfor

chipsandcracks,backingpadsforcracks,tearor

excesswear,wirebrushesforlooseorcracked

wires.Ifthepowertooloraccessoryisdropped,

inspectfordamageorinstallanundamaged

accessory.Afterinspectingandinstallingan

accessory,positionyourselfandbystandersaway

fromtheplaneoftherotatingaccessoryandrunthe

powertoolatmaximumnoloadspeedforone

minute.Damaged accessories will normally break apart

during this test time.

h) Wearpersonalprotectiveequipment 4. Depending

onapplication,usefaceshield,safetygogglesor

safetyglasses.Asappropriate,weardustmask,

hearingprotectors,glovesandshopaproncapable

ofstoppingsmallabrasiveorworkpiecefragments.

The eye protection must be capable of stopping ying

debris generated by various operations. The dust mask or

respirator must be capable of ltrating particles

generated by your operation. Prolonged exposure to high

intensity noise may cause hearing loss.

i) Keepbystandersasafedistanceawayfromwork

area.Anyoneenteringtheworkareamustwear

personalprotectiveequipment.Fragments of the

workpiece or of a broken accessory may y away and

cause injury beyond the immediate area of operation.

j) Holdpowertoolbyinsulatedgrippingsurfacesonly,

whenperforminganoperationwherethecutting

accessorymaycontacthiddenwiringoritsown

cord. A cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock.

k) Positionthecordclearofthespinningaccessory.If

you lose control, the cord may be cut or snagged and

your hand or arm may be pulled into the spinning

accessory.

l) Neverlaythepowertooldownuntiltheaccessory

hascometoacompletestop.The spinning accessory

may grab the surface and pull the power tool out of your

control.

m) Donotrunthepowertoolwhilecarryingitatyour

side.Accidental contact with the spinning accessory

could snag your clothing, pulling the accessory into your

body.

n) Regularlycleanthepowertool’sairvents.The

motor’s fan will draw the dust inside the housing and

excessive accumulation of powdered metal may cause

electrical hazards.

o) Donotoperatethepowertoolnearflammable

materials.Sparks could ignite these materials.

p) Donotuseaccessoriesthatrequireliquidcoolants.

Using water or other liquid coolants may result in

electrocution or shock.

2)KICKBACKANDRELATEDWARNINGS

• Kickback is a sudden reaction to a pinched or snagged

rotating wheel, backing pad, brush or any other

accessory. Pinching or snagging causes rapid stalling of

the rotating accessory which in turn causes the

uncontrolled power tool to be forced in the direction

opposite of the accessory’s rotation at the point of the

binding.

• For example, if an abrasive wheel is snagged or pinched

by the workpiece, the edge of the wheel that is entering

into the pinch point can dig into the surface of the

material causing the wheel to climb out or kick out. The

wheel may either jump toward or away from the operator,

depending on the direction of the wheel’s movement at

Skil 9782 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info