644812
7
Zoom out
Zoom in
Vorherige Seite
1/172
Nächste Seite
7
d) Storeidlepowertoolsoutofthereachofchildren
anddonotallowpersonsunfamiliarwiththepower
toolortheseinstructionstooperatethepowertool.
Power tools are dangerous in the hands of untrained
users.
e) Maintainpowertools.Checkformisalignmentor
bindingofmovingparts,breakageofpartsandany
otherconditionthatmayaffectthepowertool’s
operation.Ifdamaged,havethepowertoolrepaired
beforeuse. Many accidents are caused by poorly
maintained power tools.
f) Keepcuttingtoolssharpandclean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Usethepowertool,accessoriesandtoolbitsetc.,in
accordancewiththeseinstructions,takinginto
accounttheworkingconditionsandtheworktobe
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5)SERVICE
a) Haveyourpowertoolservicedbyaqualifiedrepair
personusingonlyidenticalreplacementparts. This
will ensure that the safety of the power tool is maintained.
SAFEtY INStRUCtIONS FOR ANGLE GRINDERS
1)SAFETYINSTRUCTIONSFORALLOPERATIONS
a) Thispowertoolisintendedtofunctionasagrinder,
sander,wirebrushorcut-offtool.Readallsafety
warnings,instructions,illustrationsand
specificationsprovidedwiththispowertool.Failure
to follow all instructions listed below may result in electric
shock, re and/or serious injury.
b) Operationssuchaspolishingarenotrecommended
tobeperformedwiththispowertool. Operations for
which the power tool was not designed may create a
hazard and cause personal injury.
c) Donotuseaccessorieswhicharenotspecifically
designedandrecommendedbythetool
manufacturer.Just because the accessory can be
attached to your power tool, it does not assure safe
operation.
d) Theratedspeedoftheaccessorymustbeatleast
equaltothemaximumspeedmarkedonthepower
tool.Accessories running faster than their rated speed
can y apart.
e) Theoutsidediameterandthethicknessofyour
accessorymustbewithinthecapacityratingofyour
powertool.Incorrectly sized accessories cannot be
adequately guarded or controlled.
f) Threadedmountingofaccessoriesmustmatchthe
grinderspindlethread.Foraccessoriesmountedby
flanges,thearbourholeoftheaccessorymustfit
thelocatingdiameteroftheflange. Accessories that
do not match the mounting hardware of the power tool
will run out of balance, vibrate excessively and may
cause loss of control.
g) Donotuseadamagedaccessory.Beforeeachuse
inspecttheaccessorysuchasabrasivewheelsfor
chipsandcracks,backingpadsforcracks,tearor
excesswear,wirebrushesforlooseorcracked
wires.Ifthepowertooloraccessoryisdropped,
inspectfordamageorinstallanundamaged
accessory.Afterinspectingandinstallingan
accessory,positionyourselfandbystandersaway
fromtheplaneoftherotatingaccessoryandrunthe
powertoolatmaximumnoloadspeedforone
minute.Damaged accessories will normally break apart
during this test time.
h) Wearpersonalprotectiveequipment 4. Depending
onapplication,usefaceshield,safetygogglesor
safetyglasses.Asappropriate,weardustmask,
hearingprotectors,glovesandshopaproncapable
ofstoppingsmallabrasiveorworkpiecefragments.
The eye protection must be capable of stopping ying
debris generated by various operations. The dust mask or
respirator must be capable of ltrating particles
generated by your operation. Prolonged exposure to high
intensity noise may cause hearing loss.
i) Keepbystandersasafedistanceawayfromwork
area.Anyoneenteringtheworkareamustwear
personalprotectiveequipment.Fragments of the
workpiece or of a broken accessory may y away and
cause injury beyond the immediate area of operation.
j) Holdpowertoolbyinsulatedgrippingsurfacesonly,
whenperforminganoperationwherethecutting
accessorymaycontacthiddenwiringoritsown
cord. A cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
k) Positionthecordclearofthespinningaccessory.If
you lose control, the cord may be cut or snagged and
your hand or arm may be pulled into the spinning
accessory.
l) Neverlaythepowertooldownuntiltheaccessory
hascometoacompletestop.The spinning accessory
may grab the surface and pull the power tool out of your
control.
m) Donotrunthepowertoolwhilecarryingitatyour
side.Accidental contact with the spinning accessory
could snag your clothing, pulling the accessory into your
body.
n) Regularlycleanthepowertool’sairvents.The
motor’s fan will draw the dust inside the housing and
excessive accumulation of powdered metal may cause
electrical hazards.
o) Donotoperatethepowertoolnearflammable
materials.Sparks could ignite these materials.
p) Donotuseaccessoriesthatrequireliquidcoolants.
Using water or other liquid coolants may result in
electrocution or shock.
2)KICKBACKANDRELATEDWARNINGS
Kickback is a sudden reaction to a pinched or snagged
rotating wheel, backing pad, brush or any other
accessory. Pinching or snagging causes rapid stalling of
the rotating accessory which in turn causes the
uncontrolled power tool to be forced in the direction
opposite of the accessory’s rotation at the point of the
binding.
For example, if an abrasive wheel is snagged or pinched
by the workpiece, the edge of the wheel that is entering
into the pinch point can dig into the surface of the
material causing the wheel to climb out or kick out. The
wheel may either jump toward or away from the operator,
depending on the direction of the wheel’s movement at
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Skil 9783 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info