Bedienungsanleitung Skoda BOLERO - 2010 (Seite 22 von 24) (Englisch)

678440

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Basic setting20

Incoming phone call

– An incoming phone call will be indicated on the display by “Incoming

call” followed by the call number of the caller. If the number of the

caller is stored in the phone book, the name of the caller will be

displayed instead of the call number.

– Press the function key to accept the call.

– Press the function key to reject the call.

During a phone conversation

– If you press the function key during a phone conversation the

current conversation will be switched to “mute” (Display: “Call is

held”). This means that the connection remains intact while the audio

transmission is interrupted.

– If you press the function key , again the conversation can be

continued.

– If you press the function key , during a phone conversation, the

connection to the current call number will be terminated and the unit

will change to the main Setup PHONE.

Carrying out an additional phone conversation

– Press on the function key during a phone conversation to put the

current conversation on “hold” as described above.

– Select a new call number or select a stored call number.

– If you are holding an additional conversation, you can switch between

both parties (“alternate”).

“Call waiting” and changing between two parties (Alternate)

– If you are called while holding a conversation, the number and the

name of the caller will appear below the current conversation on the

display (Function: “Call waiting”).

– Press on the function key in the line “Incoming call” to reject the

second call.

– Press on the function key in the line “Incoming call” to accept the

second call. The connection to the first party will be interrupted but

not broken (Display: “Call is held”).

– If you press the function key in the line “call is held”, the conver-

sation with this party will continue and the other party will be “put on

hold”. In this way you can alternate between two parties.

– Press the function key , to break the connection to the call number

displayed in this line.

DTMF key tones

A particular DTMF key tone is assigned to each each key of a phone. DTMF key tones

are used, for example, for the input of a password via the phone or for choosing a

colleague in a “Call center”.

If a DTMF key tone has to be entered during a conversation, you can open the

keypad field by pressing the function key at the bottom left and follow the instruc-

tions (for example: “For a private conversation with one of our co-workers, please

press ”).

You can store a longer DTMF key tone on your mobile phone. If, during a conversa-

tion, this DTMF key tone has to be entered, call up the corresponding entry from the

phone book as described.

If you press in the input mask on the function key , the displayed character

sequence in the entry line will be played as DTMF key tone sequence.

Please note that in a DTMF key tone sequence the character “+” must not appear,

as it interrupts the playing of a DTMF key tone.

Only valid for the universal Phone preinstallation GSM III.

















DTMF

s3p4.a.book Page 20 Friday, March 13, 2009 3:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - 2010 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda BOLERO - 2010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info