544762
4
Zoom out
Zoom in
Vorherige Seite
1/11
Nächste Seite
UK
The SkyTronic range of adjustable power supplies is fitted with high precision voltage and
current controls. The voltage is continuously adjustable and the max. output current limit can
also be adjusted. The power supply can be used as a constant power source. In that case the
current is continuously adjustable.
The power supply has been designed for professional use in work shops, laboratories and
schools.
The digital voltage and current display has a precision of 1 decimal with a max. deviation of ±
1% + 2 digits. The high precision control circuit can reach via an external measurement
instrument an accuracy of 5mV for voltage and 10mA for current.
Operation
Front panel:
1. Voltage and current display
2. Current adjustment
3. Fine adjustment of current
4. Fine adjustment of voltage
5. Voltage adjustment.
6. LED indicator of voltage source (current limit is not activated)
7. LED indicator for current source (current limit is activated)
8. ON/OFF switch
9. 3 connection terminals:
red (+)
black (-)
green (earth ground)
Load connection
Adjust the required voltage and connect the unit to be powered to the red (+) and black (-)
terminals. The current display shows the supplied current. If the current LED lights up, the
power supply is overloaded or shorted. Check the connections and adjust the load in order to
ensure trouble-free operation.
If you want to use the unit as a constant power supply, rotate both voltage controls completely
clockwise (max. voltage) and the current control knob completely anti-clockwise until the
required current value is reached.
Under normal conditions, the current control knob can be turned completely clockwise (for
max. current) or rotated back to a required maximum current value in order to protect the
connected unit.
Safety recommendations:
- Check the case and the leads for damage.
- For indoor use only
- Do not use the unit in humid areas
- Do not spill liquids inside the housing.
- Do not place the unit at a warm place (max. 30°C)
- Do not obstruct the ventilation holes and heat sink. Leave enough space around the unit to
ensure sufficient ventilation.
- The heat sink might get hot during operation. Do not touch during operation !
- Do not open the housing – leave all repairs to a qualified technician.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Skytronic 650.682 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info