Bedienungsanleitung Smeg 43CT (Seite 4 von 14) (Englisch)

24314

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

There are settings for normal drying and

for delicates, indicated by the letters S and

D respectively.

Any of the three settings (Figure 2A)

indicates the end of the washing pro-

gramme.

Temperature selection control

This enables you to select what temperatu-

re you want to wash at. Simply turn it gently

so that the signal matches the desired tem-

perature. Should you not wish to wash in

warm or hot water, turn the indicator to the

cold water sign

Drying time selection control

This control enables you to select the

drying time that you estimate you will need

for your wash. Gently turn it clockwise so

that the number of minutes coincides with

the time printed on the control. All times are

in minutes.

The drying programme has finished when

the Selection control (7) is in the STOP posi-

tion. If this control is set for any time at all,

then the machine will run through a drying

programme after the washing programme.

If you do not want a drying programme, this

control must always be set at STOP.

Using the control buttons

Stop/start button

If the programme runs through until the

end, you will be able to open the loading

door once the programme has finished and

the necessary time has passed for the

Safety Door Block System which is incor-

porated into the machine to have deactiva-

ted (approx. 2 minutes).

While the machine is running either a was-

hing or drying programme, it can be termi-

nated by pushing in the Pilot switch to its

stop position (11).

When the button is pressed back to ON, the

washing machine starts again from the

same phase in the cycle where it was tur-

ned off. Should you stop the machine at any

time in order to put garments in or take any

back out, make sure that the water level

does not overflow from the open door and

that the temperature inside the drum is not

excessive, don’t forget that even with the

switch off, you will have to wait long enough

for the door’s safety block to be deactiva-

ted.

Buttons for additional functions

By using these buttons, you will be able to

incorporate a series of additional functions

and features into any previously selected

washing programme, which will enable

you to adjust the washing of you garments

to your own standards and needs.

Select the function you want by pressing

the corresponding button.

Your washing machine will have some of

the following functions, depending on

which model it is.

– Spin dry bypass

button

When you press this button, you remove the

spin dry phase from whatever washing

programme you have selected, which pre-

vents creases from forming when washing

special materials.

ENGLISH

Fig. 2A

GENTLE DRYING PROGRAMME

NORMAL DRYING PROGRAMME

END END

• •

•••••

•

••••

• • • •

•••••

•

••••

• •

10 D 9 8 7 S 6 5 4 3 2 1

GENTLE WASH PROGRAMMES NORMAL WASH PROGRAMMES

FAST FORWARD

LJ6A017N5 11/10/01 16:29 Página 62

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg 43CT Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Smeg 43CT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info