Bedienungsanleitung Snom M200SC (Seite 66 von 68) (Englisch)

809888

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

v1.03

M215SC User Manual Appendix 1 - Base Station Settings

Reset conguration Description

Reset conguration to default

settings

Click Reset. When the conrmation box appears, click OK.

Security

On the Security page you can change the admin and user passwords and enter web server settings and trusted

IPs.

Passwords Description

Administrator password The admin password is required to access the administrator settings on the web user

interface of the base station and on the handsets registered at that station.

Valid values: Text string, 15 characters maximum

The default password is admin.

User password The user password is required to access the user settings on the web user interface

of the base station.

Valid values: Text string, 15 characters maximum

The default password is user.

Web Server Description

HTTP Server port Port used by the HTTP server. The default is 80.

Enable Secure Browsing When enabled, the HTTPS protocol is used, and you must select the HTTPS server

port in the next step.

HTTPS Server port Port used by the HTTPS server. The default is 443.

Note: Changing the web server settings will reboot the base station.

Trusted servers Description

Accept SIP account servers only Click the box to enable using the account servers as sources for trusted SIP trac.

When enabled, each account's registration, SIP, outbound proxy and backup outbound proxy server will be used as sources

for trusted SIP trac. All unsolicited SIP trac (for example, INVITE, NOTIFY, unsolicited MWI, OPTIONS) will be blocked

unless it is from one of the trusted servers with the enabled accounts.

If additional trusted sources are required beyond those specied with the enabled accounts (for example, when IP-dialing or

other types of server trac need to be secured), enter the allowed IPs in the Trusted IP settings.

Trusted IP Description

Accept only allowed IPs

for incoming requests

Enter up to 10 allowed IP addresses, one in each eld. Allowed formats:

1. Single IP address in IPv4 or IPv6.

2. IP range specied using CIDR notation (dened in rfc4632). IPv4 or IPv6 address followed by

a prex; for example, 192.168.0.1/24.

3. IP range specied with a pair of starting and ending IPv4 or IPv6 addresses, separated by '-'

(for example, 192.168.0.1-192.168.5.6).

◦No space before or after '-'

◦Both starting and ending IP have to be with the same IP version

◦ Starting IP has to be smaller than the ending IP; otherwise, all trac will be dropped.

Certicates

• Device Certicate. You can upload an optional web server certicate to the base station to establish a

secure connection between phone and server. If a certicate is not available, the base station's self-signed

certicate will be used during the connection transaction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snom M200SC Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snom M200SC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info