Bedienungsanleitung Snooper Lynx (Seite 16 von 22) (Englisch)

619670

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Return to contents

Lynx will conrm the coordinate has been deleted by displaying ‘Position Cleared’.

To delete all the user stored coordinates on Lynx

Press the ‘OK’ button when ‘User Points’ is displayed in the menu options.

Highlight the ‘Delete All’ option by pushing the ‘UP/DOWN’ button then press the ‘OK’ button.

A new screen will be displayed asking you to ‘Conrm Delete?’ with the options of ‘Yes’ or ‘No’. Highlight your desired option then

press the ‘OK’ button to conrm deletion. The unit will conrm the coordinates have been deleted by displaying ‘Position Cleared’.

8. Change Language

This feature will allow you to select the language of the menu options and voice alerts on the unit. There are nine languages

available; English, French, Dutch, German, Spanish, Norwegian, Portuguese, Swedish and Finnish.

9. Smart Mute

The Smart Mute setting provides an alternative alert when approaching a Fixed Speed

Safety Camera. If you are travelling below the posted speed limit the unit will provide

an audible alert but then the rest of the alert is visual only. As the unit counts down the

distance to the Fixed Speed Safety Camera the alert is visual only. If you are travelling

above the posted speed limit however you will receive both an audible and a visual

alert as normal. Once you drop below the posted speed limit for that Fixed Speed Safety

Camera the audible alert will cease and the unit will only provide a visual alert.

Note: The smart mute function does not apply to locations received via GPRS.

To adjust the Smart Mute setting

Press the ‘OK’ button when ‘Smart Mute’ is displayed in the menu options.



Highlight your desired option (‘ON’ or ‘OFF’) by pushing the ‘UP/DOWN’ button.

Once you have highlighted your desired setting press the ‘OK’ button. The unit will display ‘Setting Conrmed’ indicating the new 

setting has been saved.

10. Set Time

Lynx displays the time on the Standby Screen. This reading is updated by the GPS

Atomic Clock and is generated directly from Greenwich Mean Time (GMT) and is

completely accurate. However it does not automatically adjust for British Summer Time

(BST) or Central European time (CET) and is required to be adjusted manually. The device

is supplied with a factory default setting of GMT+0.

To adjust the time

Press the ‘OK’ button when ‘Set Time’ is displayed in the menu options – ‘GMT + 0’ is



displayed.

Push the ‘UP/DOWN’ button until the desired time is displayed then press the ‘OK’ button. The unit will display ‘Setting Conrmed’



indicating the new setting has been saved.

11. Logic

There are three Logic modes that you can select on Lynx. These dierent Logic settings

determine how Lynx alerts you to xed speed safety cameras.

To change the logic mode:

Press the ‘OK’ button when ‘Logic’ is displayed in the menu options.



Smart Mute

Set Time

Logic

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Lynx Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info