1. Connect the red wire to a triggered live connection e.g. reversing light or reversing switch.
2. Connect the Green wire to a permanent live connection e.g. in the fuse box or another
source.
3. Connect the black wire to an earth point or a negative wire on the vehicle.
4. Connect the Yellow video cable to the input of the device to accept the connection.
Once you have done this then connect the camera directly to the lead to confirm the connection is
correct and functions properly.
Once this has been done then you can disconnect the camera run the 5 metre lead through the
vehicle and confirm the camper position before final connection.
If you have any further queries about the connection of this product please call Performance
Products Technical Support Team on 01928 579579 and select option 3 on the automated Service.
