Bedienungsanleitung Snooper SG255X GPS Golf Watch (Seite 9 von 24) (Englisch)

619697

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

9 • UK

RUN mode sub-views

While training, your SG255X can display diﬀerent types of information, depending on your requirements. These can include distance,

pace, speed, HRM, calorie burn and time. You can switch between these views by pressing S3 at any time during your training

session. You can also set your SG255X to display diﬀerent combinations of information.

DISTANCE: Displays and records how far you have run or walked.

PACE: Displays your current pace. Your SG255X will advise you that, if you continue running at your current speed, you will

complete a mile, or a km, in ‘x’ minutes. This value moves up or down, depending on your speed, and can be viewed as

you run.

SPEED: Displays a straightforward view of your current speed, in either mph or kmh.

HRM: Displays your current heartbeat, using information from your HRM, if in use.

CALORIE: Displays the number of calories you are burning per hour.

User Tip: Calorie burn can only be calculated if your SG255X knows your height, weight and age, so please enter this

information in the settings section of your SG255X, or by using the included PC companion software. This user information

needs to be set before you begin any training sessions, otherwise an accurate calorie burn cannot be calculated.

TIME: Displays the time.

Setting RUN mode sub-views

You can set your SG255X to display diﬀerent combinations of information. You can set it to display either 2 lines of information, or

3 lines of information, at the same time. Plus, you can change the combination of data you want to be displayed, and the order in

which you want that data displayed.

For example, you can set your SG255X to display PACE and DISTANCE over two lines, or you can set it to display CHRONO, PACE and

DISTANCE over 3 lines.

Follow these instructions to select whether your RUN data is displayed over 2 lines or 3 lines.

 When in RUN mode, press and hold S11. Your SG255X will display HOLD SET, then SET and AUTO LAP will ﬂash. Use S1 or S5 to

scroll through the diﬀerent user settings until you see VIEW, then press S3 to select.

 Press S1 or S5 to switch between 3 rows or 2 rows, and press S3 to conﬁrm.

 Press S7 to return to the last used Mode i.e. RUN, TIME etc.

Data view over 2 lines

You can select which two pieces of data you want displayed on your SG255X at any time during a training session. You do this by

using the S3 button in two diﬀerent ways.

 Launch RUN mode in the normal way, and press S1 to start your training session.

 To change the data type displayed on line 1, press and hold S3 until the data type changes. Keep pressing and holding S3 to

choose between SPEED, HRM (if connected), CALORIE, TIME (clock), CHRONO, DISTANCE or PACE.

 Press S3 brieﬂy to change the data type displayed on line 2. Keep pressing S3 to choose between SPEED, HRM (if connected)

CALORIE, TIME (clock), CHRONO, DISTANCE or PACE. Each time you press S3, the data type displayed will appear brieﬂy to conﬁrm

your selection.

 You can change the data displayed on either line by pressing S3, brieﬂy, or pressing and holding S3 at any time during your

training session.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper SG255X GPS Golf Watch Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info