Bedienungsanleitung Snooper SR200 GPS Sport watch (Seite 7 von 12) (Englisch)

619725

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

7 • UK

Setting the lap distance

 When in RUN mode, press and hold S11. Your SR200 will display HOLD SET, and then SET and AUTO LAP will ﬂash. Press S5 to

select AUTO LAP and 1 KM will ﬂash in the display. To select the length of lap you require, press S1 to switch between 0.4, 1, 2, 3, 4,

5 (kilometres or miles, depending on the units you have selected in user settings). Then press S5 to select.

 Once you have selected the lap distance, press S5 to conﬁrm. ALERT ON will be displayed. Press S1 to switch between ALERT ON

and ALERT OFF and press S5 to conﬁrm. When training, your SR200 will beep once each time you reach your selected lap distance,

assuming you have the alert switched on!

 Press S7 to go back to the user settings menu.

Using the manual lap time function

The lap function lets you take and save a lap time at any point during your session. If you are running on a track, for instance, you can

time how long it takes to complete each lap. Your SR200 will display the time of the lap as you complete each lap, but you can also

review your lap times later directly on your SR200. The manual lap time function can be accessed from the CHRONO mode.

You can access CHRONO and use the manual lap time in two diﬀerent ways. Launch RUN mode, press S1 to start your training session

as normal and press S7 to switch to CHRONO. Or go directly to CHRONO by pressing S7 until CHRONO is displayed on the screen.

Once you are in CHRONO and when you are ready to record and save a lap time simply press S5. Your last lap time will be displayed

brieﬂy on your SR200, then the display will revert to the previous data view selected.

Once you have completed your training session, you can review all the lap times you recorded directly on your SR200 by pressing S5,

before saving the session. The lap times recorded can also be reviewed after you have saved them in DATA mode.

Using your SR200 indoors without a GPS signal.

It is possible to use your SR200 indoors where there is no GPS signal. The functions CHRONO, LAP and CLOCK will operate as normal

but DISTANCE and SPEED will not as they cannot be calculated without GPS.

 To use your SR200 indoors without a GPS signal follow these instructions:

 From TIME mode press and hold S7 for approx 3 seconds. Your SR200 will display GPS OFF and will then automatically change to

CHRONO view but with INDOOR ﬂashing at the top of the screen.

 Your SR200 is now in INDOOR mode. CHRONO, LAP and CLOCK function can be used as normal but no DISTANCE or SPEED values

will be displayed or recorded. Follow the RUN mode instructions above for further details of how to operate CHRONO and to save

and delete training sessions.

How to set UNITS – metric or imperial

You can set your SR200 to display speed, and display and record distances in kilometres or miles.

 When in RUN mode, press and hold S11. Your SR200 will display HOLD SET and then SET and AUTO LAP will ﬂash. Use S1 to scroll

through the diﬀerent user settings until you see UNITS, then press S5 to select.

 Press S1 to switch between KM or MI (kilometres or miles) and press S5 to conﬁrm your selection.

 Press S7 to return to the last used mode i.e. RUN, TIME etc.

How to set USER - gender, age, weight and height

To enable your SR200 to accurately calculate calorie burn, you will need to tell your SR200 whether you are male or female, your age,

weight and height.

 When in RUN mode, press and hold S11. Your SR200 will display HOLD SET and then SET and AUTO LAP will ﬂash. Use S1 to scroll

through the user settings until you see USER, then press S5 to select. MALE or FEMALE will start to ﬂash.

 Press S1 to switch between MALE or FEMALE, then press S5 to conﬁrm.

 Next, AGE will be displayed. Use S1 to adjust your age, then press S5 to conﬁrm.

 Next, WEIGHT will be displayed. Use S1 to adjust your weight, then press S5 to conﬁrm.

 Next, HEIGHT will be displayed. Use S1 to adjust your height, then press S5 to conﬁrm.

 Press S7 to return to the last used mode i.e. RUN, TIME etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper SR200 GPS Sport watch Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info