619725
10
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
10 • UK
CHIME Setting in TIME mode
Chime refers to the beep that sounds when you press any of the buttons on your SR200. This feature can be turned on or off.
Press S7 and scroll through the modes until you see TIME.
Press and hold S11. The display will show HOLD SET and then TIME will flash.
Press S1 or S11 until you see CHIME, then press S5 to enter.
Press S1 or S11 to select CHIME ON or CHIME OFF, then press S5 to save.
Press S7 to return to the CHIME setting screen.
Press S7 again to exit and return to TIME mode.
How to set up and use the ALARM mode
It is possible to set up to five different alarms on your SR200.
Press S7 and scroll through the modes until you see ALRM.
The display will show AL-1 (Alarm 1), a time, T1 OFF or T1 ON.
Press and hold S11. Your SR200 will display HOLD SET and AL-1 will flash.
Press S1 or S11 to toggle through AL-1 to AL-5, then press S5 to select the alarm you want to set.
The HOUR digit will start to flash.
Press S1 or S11 to adjust the hour value, then press S5 to confirm.
The minute value will now flash.
Press S1 or S11 to adjust the minute value, then press S5 to confirm.
T1 or T2 will now flash. Press S1 or S11 to select whether this alarm relates to T1 (your time zone 1) or T2 (your time zone 2), then
press S5 to confirm.
Press S1 or S11 to change the setting.
Press S5 to confirm.
ON (Alarm on) or OFF (Alarm off) will now flash.
Press S1 or S11 to turn the alarm ON or OFF, then press S5 to confirm.
Press S7 to return ALRM sub-menu.
Press S7 again to exit and return to TIME mode.
How to preview alarms set and switch alarms and button chime (beep) on and off
Press S7 and scroll through the modes until you see ALRM
Press S5 to scroll through and preview AL-1 (Alarm 1) to AL-5 (Alarm 5) and then CHIME.
Press S1 to turn an alarm on or off, then press S5 to confirm.
When CHIME is displayed press S1 to switch the CHIME on or off. CHIME is the beep that is emitted when you press any of the
buttons and can be switch on and off.
Press S7 to exit and return to TIME mode.
User Tip: The alarm will sound for 20 seconds when activated. Press any button to silence the alarm.
A small ‘bell’ icon will be displayed to the left-hand side of the screen in TIME mode to indicate that you have an active alarm set.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Snooper SR200 GPS Sport watch wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info